| Imager | 1/3" Interline SXVGA CCD: ICX445AQA |
| Picture Element | HD Active (H x V): 1280 x 720 |
| Chip Size | 0.24 x 0.19" (6.26 x 5.01 mm) |
| Cell Size | 3.75 x 3.75 µm |
| Scene Illumination | Minimum: 5 lux at F1.2 at 50% IRE, AGC On and 1/60 second shutter speed with IR cut filter |
| Resolution | 600 TVL |
| Sync System | Internal |
| Video Output | HD-SDI (SMPTE292M) YPbPr, 1280 x 720, 60 fps / 59.94/50 Hz |
| Configuration | Via the UART communication with auto electronic shutter and AGC |
| Shutter Speed | Adjustable via the UART communication
Up to 1/100,000 seconds at 60/59.94 Hz or up to 1/83,947 seconds at 50 Hz |
| Gain | AGC or Fixed gain, selectable via the UART communication Gain range: 0 to 18.3 dB |
| Digital Gain Control | Up to 5.9866 dB |
| Gamma | 1.0, 0.9, 0.8, 0.7, 0.6, 0.5, 0.45, 0.3 or manual gamma Gamma selectable via the UART communication |
| White Balance | Auto white balance / manual white balance / push-to-set white balance White balance selectable via the UART communication |
| Mirror Image | Normal Image and Horizontal Flip are selectable via UART communication |
| Preset | DSP: 28; Selectable picture mode via the UART communication |
| Generators | Line: Both horizontal and vertical with all available colors
Thickness adjustable via the UART communicationShadow Mask: Horizontal and vertical with shading level adjustment via the UART communication Character: Built-in character generation function via the UART communication |
| Communication | 3.3 V UART communication via 3.5φ stereo jack |
| Pixel Blemish Collection | Up to 64 pixel blemish static collection |
| Power | Input Voltage: 9 to 15 VDC (Typically: 12 VDC)
Consumption: < 3.0 W |
| Optical Filter | Includes IR cut filter |
| Lens Mount | C mount |
| Interface Connector | Video Output: BNC connector
Power Input: 12 V power jack
External Control: 3.5φ stereo jack with SW board
Communication: 3.5φ stereo jack |
| Button | Primary SW Initial press button function: push-to-set white balance Initial hold button function: Auto white balance (Function is selectable via the UART communication) |
| Temperature | Operating Temperature: 32 to 104°F (0 to 40°C)
Storage Temperature: -22 to 149°F (-30 to 65°C) |
| Vibration | 20 to 200 Hz to 20 Hz (5 minute/cycle), Acceleration: 10 G, 30 minute, XYZ each direction |
| Shock | Acceleration: 38 G, half amplitude 6 ms, 3 times, XYZ each direction |
| Dimensions (W x H x D) | 1.5 x 1.5 1.8" (40.0 x 40.0 x 45.8 mm) |
| Weight | Approximately 4.2 oz (120.0 g) |
Question and answer discussion forum concerning user instructions and resolving problems with the Sentech STC-HD133SDI-KT 720p HD Digital Output STC-HD133SDI-KT - no comments have been made yet - be the first to add a comment