User manual for Shure FP33 3-Channel Stereo Mixer FP33
Overall Rating: 4.5
90% of respondents would recommend this to a friend.
- Manufacturer: Shure
- Basic description and contents of package
- Product classification: Pro Audio - Location Sound - Field Mixers
- Safety instructions
- Startup and operation of the field mixers
- Tips for setting up your Shure
- Settings and expert assistance
- Contact Shure service
- Warranty information
We recommend checking out our discussion threads on the Shure FP33 3-Channel Stereo Mixer FP33,
which address similar problems with connecting and setting up Field Mixers Shure.
User manual for the Shure FP33 3-Channel Stereo Mixer FP33
The user manual for the Shure FP33 3-Channel Stereo Mixer FP33 provides
necessary instructions for the proper use of the product Pro Audio - Location Sound - Field Mixers.
The Shure FP33 3-Channel Stereo Mixer is a field mixer rugged enough to handle the elements and flexible enough for professional working environments. It is suitable for electronic news gathering (ENG), field production (EFP), film, television and recording for sound design. The FP33 features 3 XLR inputs and left/right XLR outputs. The inputs and outputs can be switched between mic and line level signal. There are additional 3.5mm Monitor and Tape connections as well as both 1/4" and 3.5mm headphone outputs.
The FP33 has panning and level controls on channels 1-3, and the headphone monitor dial provides monitoring of either left or right, dual mono, or stereo signal. Both 48V and 12V phantom power are available and two 9 volt batteries provide up to 8 hours of use. The FP33 can also use AC power from a Shure PS20 or PS20E power supply.
The FP33's Mix Bus output jack allows users to cascade multiple FP33 mixers for simultaneous use, and the professional analog VU meters have proven much more durable against the elements than LED, LCD, or fluorescent meters. The VU meters feature timed or toggled backlighting and are multifunctional. There's also a built-in tone oscillator for calibration needs, and the Monitor In and modified Slate Mic/Tape Out jacks can be used for 2-way isolated talk back.
If you own a Shure field mixers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Shure FP33 3-Channel Stereo Mixer FP33 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Shure FP33 3-Channel Stereo Mixer FP33:
| Inputs || 3 x Balanced XLR inputs |
| Output || 2 x Balanced XLR outputs (1 x L/R) |
| Headphone Outputs || 1 x 1/4" TRS stereo |
1 x 3.5mm TRS stereo mini
| ALT I/O || 1 x 3.5 mm TRS stereo mini - Monitor In |
1 x 3.5 mm TRS stereo mini - Tape Out
| Link Input/Output || "MIX BUS" connection: 3-Pin mini-XLR connector |
| Input Impedance || Mic: 1kΩ internal; use with 19 to 600Ω source; -10 dBV clip level |
Line: 50kΩ internal; use with ≤ 10kΩ source; +36 dBV clip level
Monitor: 10kΩ internal; use with ≤ 1kΩ source; +21 dBV clip level
| Output Impedance || Mic: 1Ω internal; use with Low-Z source; -31 dBV clip level |
Line: 150Ω internal; use with 600Ω source; +18 dBm clip level
Tape: 2.2kΩ internal; use with >10kΩ source; +3 dBV clip level
Headphones: 300Ω internal; use with 8 to 200Ω source; +11 dBV clip level
| Gain || Low-Z Mic Input: Line 78 dB, Mic 28 dB, Headphone 89 dB, Tape 66 dB |
Line: Line 28 dB, Mic -22 dB, Headphone 39 dB, Tape 16 dB
Monitor: Headphone 11 dB
| Frequency Response || 20 to 20,000 Hz ± 2.0 dB (channel controls centered) |
| THD || 0.25% THD @ +4dBm output, 50 to 20,000 Hz |
| Equivalent Input Noise || -127 dBV with 150Ω source, 20 to 20,000 Hz |
| Output Noise || Master level fully CCW: ≤ -100 dBV, 20 to 20,000 Hz |
Master level fully CW: ≤ -80 dBV, 20 to 20,000 Hz
| Common Mode Rejection Ratio || 65 dB @ 100 Hz, -20 dBV input |
| Polarity || Mic/Line to Mix Bus: inverting |
all other signal paths are non-inverting
| Overload Protection || Shorted outputs, even for prolonged periods, cause no damage. Microphone inputs of up to 3 Vrms cause no damage. The Line and monitor inputs can withstand signals of up to 30 Vrms. |
| Output Clipping Level || ≥ -18 dBm @ line output into 600Ω |
| Oscillators || Tone Oscillator: 1 kHz ±10% |
Slate Tone Oscillator: 400 Hz ±10%
| Limiter || Threshold: adjustable; 0 dBm to +15 dBm |
Attack time: 1 mS
Release time constant: selectable; 100 mS or 1 second
Indicator: green when limiting by 1 dB or more
| Microphone Power || 12V Phantom through matched 680Ω |
48V Phantom: through matched 6.8kΩ
12V T (A-B): through matched 180Ω
| LED Indicators || Input Channel Bi-Color LEDs: |
Green: Signal presence; visual indication of mix level
Red: 6 dB below clipping level
Output Peak/Limiter Bi-Color LEDs:
Green: Output being limited by 1 dB or more
Red: Output peak threshold reached; factory set at +17 dBm; user adjustable from 0 to 17 dBm
| VU Meter || VU Left/Right Channel Output Level Meters: 0 VU preset at +4 dBm output level |
| Operating Temperature || Operating: 0 to 60° C (32 to 140° F) |
Storage: -40 to 85° C (-40 to 185° F)
| Power || Internal: two 9V alkaline batteries |
External: 12-30 VDC to DC In jack; non-polarized
| Current Drain || Approximately 41 mA (idle) at 18V |
| Battery Life || 8 hours minimum, typical |
| Dimensions (H x W x D) || 2.26 x 7.24 x 6.33" (58 x 184 x 161 mm) |
| Weight || 3.5 lb (1.6 kg) |
| Package Weight || 5.95 lb |
| Box Dimensions (LxWxH) || 14.0 x 10.2 x 3.2" |
The user manual for the Shure FP33 3-Channel Stereo Mixer FP33 can be downloaded in .pdf
format if it did not come with your new field mixers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Shure users keep a unique electronic library
for Shure field mixerss,
where you can use our link to download the user manual for the Shure FP33 3-Channel Stereo Mixer FP33.
The user manual lists all of the functions of the Shure FP33 3-Channel Stereo Mixer FP33,
all the basic and advanced features and tells you how to use the field mixers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Shure service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Shure FP33 3-Channel Stereo Mixer FP33. User manuals are also
available on the Shure website under Pro Audio - Location Sound - Field Mixers.
Question and answer discussion forum concerning user instructions and resolving problems with the Shure FP33 3-Channel Stereo Mixer FP33 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Shure FP33 3-Channel Stereo Mixer FP33
Can't find what you're looking for? Try Google Search!|
Most recently discussed products:|
Shutter Fixed - IK Multimedia iKlip Grip Smartphone Stand IP-IKLIP-GRIP-IN
Posted by: ertu
i had the same problem, just solved.
The problem occurs because the battery don't seat well enough, just put a piece of paper to the bottom of the battery cover so it will apply some pressure to the battery. It worked and never disconnected again...
manual - Sigma 8-16mm f/4.5-5.6 DC HSM Ultra-Wide Zoom Lens 203205
Posted by: Stanley A, Margaritis
Incretable lens.!! I'm glad that I purchased it.Very clear vision, elegant design, state of the art craftsmanship. Very well done. BRAVO.!!!!!...
Sound - House of Marley Liberate Bluetooth Portable Audio EM-JA005-TN
Posted by: steren20
I can connect to my Liberate BT and play music, but can not adjust the sound either on my phone or with the speaker....
Velbon ph 357q manual - Velbon PH-157Q 3-Way Pan/Tilt Head PH-157Q
Posted by: Pat Roth
I would like the manual for the above tripod if possible...
red filter - Polar Pro Red Dive Filter for GoPro Standard Housing P1001
Posted by: Vineta
I would like to buy red filter P1001 for GoPro Hero 3+ Silver camera, for 40 m standart housing.
I found this item in your homepage here: http://www.pdf-manuals.com/polar-pro-red-dive-filter-for-gopro-standard-housing-p1001-244720-manual
May I as...
|Uploaded instruction manuals