User manual Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50
Operating instructions and pdf manual for use - Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50 User manual, User manual Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50, Shure, QLXD14/85, Lavalier, Wireless, Microphone, QLXD14
User manual for Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50
Manufacturer: Shure
Basic description and contents of package
Product classification: Pro Audio - Live Sound - Wireless Systems
Safety instructions
Startup and operation of the wireless systems
Tips for setting up your Shure
Settings and expert assistance
Contact Shure service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50,
which address similar problems with connecting and setting up Wireless Systems Shure.
User manual for the Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50
The user manual for the Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50 provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Wireless Systems.
For capturing audio, the QLXD14/85 Lavalier Wireless Microphone System by Shure is a good choice to get the job done. It can be used for mid-size events and installations in businesses, hotels, government offices, schools, houses of worship, live performance spaces, and more. It features 24-bit digital audio, network control, and AES-256 encryption. The QLX-D wireless system is built with switching diversity and automatic channel scan, and has IR sync capabilities to make finding an open frequency quick. Featuring a frequency range of 20 Hz to 20 kHz, it offers more than 60 available channels per frequency band. The receiver and beltpack also feature a backlit LCD display to allow for navigation though the menus and controls. With clearly defined performance the QLX-D wireless delivers clean audio and provides professional features for demanding live sound events and installations.
If you own a Shure wireless systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50:
330' (100 m) Note: Actual range depends on RF signal absorption, reflection and interference
RF
Tuning Step Size: 25 kHz, varies by region
Image Rejection
Greater than 70 dB, typical
RF Sensitivity
-97 dBm at 10-5 BER
Latency
Less than 2.9 ms
Audio Frequency Response
QLXD1: 20 Hz - 20 kHz (±1 dB)
Audio Dynamic Range
System Gain @ +10: Greater than 120 dB, A-weighted, typical
Total Harmonic Distortion (THD)
-12 dBFS Input, System Gain @ +10: Less than 0.1%
Polarity
System Audio: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4" (6.35 mm) output
Operating Temperature Range
0 to 122°F (-18 to 50°C) Note: Battery characteristics may limit this range
Storage Temperature Range
-20 to 165°F (-29 to 74°C) Note: Battery characteristics may limit this range.
Gain Adjustment Range: -18 to +42 dB in 1 dB steps Configuration: 1/4" (6.35 mm), Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio -) Impedance 1/4" (6.35 mm), 100 ohms (50 ohms Unbalanced) XLR: 100 ohms Full Scale Output: 1/4" (6.35 mm), +12 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV Mic/Line Switch: 30 dB pad Phantom Power Protection: 1/4" (6.35 mm), Yes XLR: Yes
Networking
Network Interface: Single Port Ethernet 10/100 Mbps Network Addressing Capability: DHCP or Manual IP address Maximum Ethernet Cable Length: 328' (100 m)
Shure SB900 rechargeable Li-Ion or AA batteries 1.5 V
Battery Runtime
At 10 mW: Shure SB900: up to 10 hours Alkaline: up to 9 hours
Audio Input
Connector: 4-pin male mini connector (TA4M) Configuration: Unbalanced Impedance: 1 MOhm Maximum Input Level 1 kHz at 1% THD: 8.5 dBV (7.5 Vpp) Preamplifier Equivalent Input Noise (EIN) System Gain Setting ≥ +20: -120 dBV, A-weighted, typical
RF Output
Connector: SMA Antenna Type: 1/4 wave Impedance: 50 Ω Occupied Bandwidth: Less than 200 kHz Modulation Type: Shure proprietary digital Power: 1 mW or 10 mW Varies by region
The user manual for the Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50 can be downloaded in .pdf
format if it did not come with your new wireless systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Shure users keep a unique electronic library
for Shure wireless systemss,
where you can use our link to download the user manual for the Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50.
The user manual lists all of the functions of the Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50,
all the basic and advanced features and tells you how to use the wireless systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Shure service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50. User manuals are also
available on the Shure website under Pro Audio - Live Sound - Wireless Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Shure QLXD14/85 Lavalier Wireless Microphone QLXD14/85-J50 - no comments have been made yet - be the first to add a comment