|
User manual for Speco Technologies OnSIP OS102 Dual-Codec 1-Channel Video OS102
- Manufacturer: Speco Technologies
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders
- Safety instructions
- Startup and operation of the video encoders & decoders
- Tips for setting up your Speco Technologies
- Settings and expert assistance
- Contact Speco Technologies service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Speco Technologies OnSIP OS102 Dual-Codec 1-Channel Video OS102,
which address similar problems with connecting and setting up Video Encoders & Decoders Speco Technologies.
|
User manual for the Speco Technologies OnSIP OS102 Dual-Codec 1-Channel Video OS102
The user manual for the Speco Technologies OnSIP OS102 Dual-Codec 1-Channel Video OS102 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
The Speco Technologies OnSIP OS102 Dual-Codec 1 Channel Video Server transmits synchronized video data in real time with D1 resolution at full frame rate. It supports H.264/AVC, MJPEG codecs for compressed data streaming. Multiple video streams with differentiated resolutions and frame rates allow simultaneous connections through low-speed networks. This video server can be connected, controlled, and monitored from a remote location through an IP connection over the Internet or intranet.
|
If you own a Speco Technologies video encoders & decoders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Speco Technologies OnSIP OS102 Dual-Codec 1-Channel Video OS102 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Speco Technologies OnSIP OS102 Dual-Codec 1-Channel Video OS102:
Video Compression | Simultaneous dual-codec (H.264 / MJPEG) | Resolution | NTSC (30 fps Maximum) : 704 x 480, 640 x 480, 704 x 240, 352 x 240, 176 x 112 PAL/SECAM (25 fps Maximum) : 704 x 576, 640 x 480, 704 x 288, 352 x 288, 176 x 144 | Streaming | 3 simultaneous video profiles, select the codec type, resolution and frame rates for each profile | Bit-Rate | CBR, VBR, HBR | Image Settings | Text overlay, privacy mask, de-interlace filter | Motion Detection | 3 zones, arbitrary shape with independent sensitivity | Protocols | IPv4/v6, TCP, UDP, IGMP, ICMP, ICMPv6, ARP, RARP, PPPoE, RTCP, RTP, RTSP, SDP, HTTP, HTTPS, SMTP, FTP, DHCP, UPnP, SNMP, NTP, DNS, DynDNS, SOCKS, QoS layer 3, DiffServ, Bonjour | Access | 100Base-T, xDSLModem, cable modem, leased line, optic fiber | Firmware Upgrade | Over IP network | Administration | Remote administration over IP network | Client | Web Viewer: Simple viewing over Internet explorer Speco-NVR: Standard VMS software | DDNS | Speco DDNS supported | Security | User ID & password protection, IP address filtering, HTTPS encryption, digest authentication, user access log | Management | Time Management Sync to PC: Synchronize to PC only once Manual: Manual time setting Internet Time Server: Synchronize to Time Server Daylight savings | Support | SDK: Active-X, HTTP | Connections | LAN: RJ-45, 10/100BaseT LAN (auto MDIX) Alarm Input / Output: Alarm I/O (1 sensor input & 1 relay output) Factory Reset | System Integration | Intelligent Video: Motion detection Alarm Triggers: Intelligent video + sensor input Alarm Events: Relay output Client Software Speco NVR: 64 channel | Mobile Applications (iOS/Android) | Speco OnSIP | Operating Temperature | 32 to 113°F (0 to 45°C) | Humidity | 8 to 80% RH | Power Supply | 12 VDC (power supply not included) | Power Consumption | 250 mA | Housing Material | Aluminum | Approvals | FCC, CE, MIC, RoHS | Dimensions (L x H x W) | 1.7 x 0.9 x 2.8" (4.3 x 2.3 x 7.1 cm) | Weight | 3.2 oz (90.7 g) | |
The user manual for the Speco Technologies OnSIP OS102 Dual-Codec 1-Channel Video OS102 can be downloaded in .pdf
format if it did not come with your new video encoders & decoders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Speco Technologies users keep a unique electronic library
for Speco Technologies video encoders & decoderss,
where you can use our link to download the user manual for the Speco Technologies OnSIP OS102 Dual-Codec 1-Channel Video OS102.
The user manual lists all of the functions of the Speco Technologies OnSIP OS102 Dual-Codec 1-Channel Video OS102,
all the basic and advanced features and tells you how to use the video encoders & decoders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Speco Technologies service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Speco Technologies OnSIP OS102 Dual-Codec 1-Channel Video OS102. User manuals are also
available on the Speco Technologies website under Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
Question and answer discussion forum concerning user instructions and resolving problems with the Speco Technologies OnSIP OS102 Dual-Codec 1-Channel Video OS102 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Speco Technologies OnSIP OS102 Dual-Codec 1-Channel Video OS102
|
|
|
|
|