|
User manual for SPL 2Control Speaker & Monitoring Controller SPL2CON
- Manufacturer: SPL
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Studio Monitor Controllers
- Safety instructions
- Startup and operation of the studio monitor controllers
- Tips for setting up your SPL
- Settings and expert assistance
- Contact SPL service
- Troubleshooting
- Warranty information
- Price: 779 USD
|
We recommend checking out our discussion threads on the SPL 2Control Speaker & Monitoring Controller SPL2CON,
which address similar problems with connecting and setting up Studio Monitor Controllers SPL.
|
User manual for the SPL 2Control Speaker & Monitoring Controller SPL2CON
The user manual for the SPL 2Control Speaker & Monitoring Controller SPL2CON provides
necessary instructions for the proper use of the product Pro Audio - Recording - Studio Monitor Controllers.
The 2Control Speaker and Monitoring Controller from SPL combines loudspeaker and headphone monitoring in a compact, designed to be easy to use, and high quality control device. Control near-field monitors, full-range speakers and headphone monitoring for two listeners from one central unit. This controller features a Crossfeed control which allows analysis of a stereo panorama on headphones just like with loudspeakers. The unit's concept is consequently based upon duality: Two channels, two sources, two loudspeaker sets, two headphones, hence, 2Control.
The advantages of an analog monitoring controller becomes especially apparent in combination with modern audio and video production tools such as ProTools, Nuendo, Cubase, Logic, Deck, etc. Monitor levels and source management can be handled independently of the software and with no loss in quality. You no longer need to set up additional aux sends for monitoring. In addition, you won't have to worry about over- or under-driving the converters when changing monitor levels. No bit changes during playback means no degradation is sound.
The concept of the 2Control is based on a dual-channel operation that allows for connection of two sources, two stereo speaker sets and two headphones. Each of the three speaker outputs (2 stereo sets, 1 x mono speaker) is driven by its own balancing stage to exclude signal-degrading mutual influences. Each headphone output is supplied by a separate amplifier to allow for completely independent operation of two headphones without any interaction from the other output (crosstalk).
The 2Control speaker volume potentiometer and active circuits correspond with the high demands in professional audio applications regarding sound quality and usability. In contrast to passive circuits, the 2Control's active designs are engineered to not influence impedances when levels change. Altering impedances would again have effects on the frequency response, so the 2Control's active design improves linearity. Additionally there is often the need to "zoom" into audio material when listening to quiet passages or checking for artifacts etc. - and only active designs offer signal amplification.
|
If you own a SPL studio monitor controllers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the SPL 2Control Speaker & Monitoring Controller SPL2CON in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the SPL 2Control Speaker & Monitoring Controller SPL2CON:
Inputs and Outputs | Electronically balanced instrumentation amplifiers Input Sockets: XLR Output Sockets: XLR, Stereo TRS Nominal Input Level: IN 1: +4 dBu, IN 2: +4 dBu / -10 dBV Input Impedance: 22 kOhm Output Impedance: 75 Ohm, Headphones: 22 Ohm Maximum Input Level: 21.3 dBu Maximum Output Level: 21.3 dBu Volume Control Range: -80 dB to +6.6 dB Headphones: -65 dB to +14.9 dB | Measurements | Frequency range: 10 Hz to 100 kHz (-3 dB) CMRR: ›60 dB (@ 1 kHz, 0 dBu input level, unity gain) THD & N: 0.002% (@ 1 kHz, 0 dBu input level, unity gain) Signal to Noise Ratio: -96 dB/Headphones: -85 dB (A-weighted) Crosstalk L/R: ›70 dB (@ 1 kHz) Dynamic Range: 116 dB Power Consumption: ca. 25W | Power Supply | Features: Toroidal transformer with voltage selector Fuses (slow blow): 230V / 50 Hz: 315 mA, 120V / 60 Hz: 630 mA | Dimensions (W x H x D) | 8.5 x 3.1 x 8.7" (215 x 80 x 220 mm) Depth with controls and sockets: 9.6" (245 mm) Height with feet: 3.7" (95 mm) Front height with opened feet: 5.0" (126 mm) | Weight | 4.1 lb (2.1 kg) | Package Weight | 7.4 lb | Box Dimensions (LxWxH) | 14.7 x 14.2 x 6.8" | |
The user manual for the SPL 2Control Speaker & Monitoring Controller SPL2CON can be downloaded in .pdf
format if it did not come with your new studio monitor controllers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other SPL users keep a unique electronic library
for SPL studio monitor controllerss,
where you can use our link to download the user manual for the SPL 2Control Speaker & Monitoring Controller SPL2CON.
The user manual lists all of the functions of the SPL 2Control Speaker & Monitoring Controller SPL2CON,
all the basic and advanced features and tells you how to use the studio monitor controllers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from SPL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the SPL 2Control Speaker & Monitoring Controller SPL2CON. User manuals are also
available on the SPL website under Pro Audio - Recording - Studio Monitor Controllers.
Question and answer discussion forum concerning user instructions and resolving problems with the SPL 2Control Speaker & Monitoring Controller SPL2CON - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the SPL 2Control Speaker & Monitoring Controller SPL2CON
|
|
|
|
|