|
User manual for SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD
- Manufacturer: SPL
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Microphone Preamps
- Safety instructions
- Startup and operation of the microphone preamps
- Tips for setting up your SPL
- Settings and expert assistance
- Contact SPL service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD,
which address similar problems with connecting and setting up Microphone Preamps SPL.
|
User manual for the SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD
The user manual for the SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD provides
necessary instructions for the proper use of the product Pro Audio - Recording - Microphone Preamps.
The 2485 GoldMike MK2 with an A to D Converter from SPL is a discrete, Class-A, transistor-stage, dual-channel microphone and instrument preamplifier. Like its predecessor, the GoldMike Mark2 retains a hybrid solid state and tube construction to combine the best of both worlds.
This GoldMike MK2 includes a built-in 24- bit / 192 kHz A to D Coverter.
The rackmountable GoldMike MK2 has updated tonal flexibility and versatility, making it a useful dual-channel front end for almost any modern production environment.
The GoldMike MK2 is the result of all our experience and knowledge from its earlier predecessor and it represents an improved, more flexible and modernized version.
We have added technologies that have already been proven to provide improved tonal results in other SPL products. For example, the instrument input is designed around a Class-A impedance converter which premiered in the SPL GainStation.
A significant contribution to the success of the predecessor was the hybrid preamplifier concept. It combines transistor and tube preamplifier stages and specifically utilizes their technological and sonic advantages: The efficiency and low noise of a discrete transistor stage is enriched with musical coloration of a tube stage.
The transistor stage is composed of single transistors in a Class-A design. The circuitry is fully discrete, and each transistor is completely optimized for its specific task. You will not find any IC's in this preamplifier stage because they cannot be optimized for this specific application to the degree we at SPL aim for. The is a discrete Class-A transistor stage crafted specifically for this preamplifier.
The degree of tube pre-amplification is no longer the fixed +6 dB value of its predecessor. The GoldMike MK2 sports the selection of three different tube pre-amplifications: +6 dB remains the standard and is complemented by +12 dB and +18 dB. This allows creative variety with the tube saturation and limiting effects.Experiment as you wish to achieve the sounds you are looking for.
We have also added an extra setting to the popular Flair circuitry to give increased flexibility to the "presence" improvement.
Because the GoldMike MK2 is a dual-channel preamplifier, its channel separation is of fundamental importance for the stereo image. Therefore the print-board layout is symmetrically mirrored around the power supply in the center from channel 1 to channel 2. This results in an identical signal flow to supporting a naturally balanced stereo image. Additionally, the print board provides extra-large ground areas maximizing the shielding against crosstalk and interference.
This GoldMike MK2 comes equipped with the 24-bit / 192 kHz A/D Converter Module 1090, and works with a plug-and-play design for easy installation and usage. It offers a S/P-DIF output with both coaxial and optical connectors in parallel. The heart of the module is a 24-bit converter with a variable sample rate of up to 192 kHz. Quartz oscillators help ensure a clean, low-jitter master clock. The internal sample rate can be switched between 44.1, 48, 88.2 and 96 kHz. Other sample rates (32, 176.4 and 192 kHz) are set by external syncronization.
The converter can be synced to other digital devices via a S/P-DIF input. The internal oscillators are automatically disabled when an external clock signal is present to prevent interference. An extremely effective voltage-stabilizing circuit ensures that the converter continuously receives sufficient and stable voltage - an important prerequisite for clean, transparent audio. The compact design minimizes the signal path to the converter. Grounding surfaces on both sides of the circuit board effectively reduce interference and ensure optimal separation between analog and digital components.
Adjust the sound of your world with the GoldMike MK2.
|
If you own a SPL microphone preamps and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD:
| Number of Channels | Two | | Frequency Response | ‹10 Hz to 90 kHz (-3 dB) | | Input Impedances | PER CHANNEL
Microphone, XLR: 2.8 kOhms
Line In, TRS: 10 kOhms
Instrument In, TRS: 1 MOhm | | Output Impedance | XLR and TRS: 50 ohms | | THD + N | Input level -30 dBu, Gain 30 dBu: 0.016 %
Input level -40 dBu, Gain 40 dBu: 0.017 %
Input level -50 dBu, Gain 50 dBu: 0.022 %
Input level -60 dBu, Gain 60 dBu: 0.048 % | | Noise | A-weighted, R=40 ohms
Gain 0dB: -91.2 dBu
Gain 40 dB: -86.6 dBu
Gain 50 dB: -78.7 dBu
Gain 60 dB: -69.3 dBu | | Dynamic Range | Gain 30 dB: 110 dB | | E.I.N. Microphone Preamplifier | 128 dBu | | Ground Lift | Yes | | Maximum Input Level | Microphone, XLR: +7 dBu
Microphone, XLR +PAD: +28 dBu
Line In, TRS: +23 dBu
Instrument In TRS: +7 dBu
Instrument In TRS +PAD: +14 dBu | | Maximum Output Level | Balanced, XLR+ TRS +26.8 dBu
Unbalanced, XLR+ TRS +21.5 dBu | | CMRR | 1 KHz, Gain 30 dB: ›75 dB
10 KHz, Gain 30 dB: ›75 dB | | Phantom Power | Yes, 48 V switchable | | A/D Converter | Internal Sample Rates: 44.1, 48, 88.2, 96 kHz
External Sample Rates: 32 kHz, 176.4 kHz and 192 kHz
Dynamic Range: 112 dB (A-weighted)
THD+N (@-1 dBFS/1 kHz): 0.0007%
Frequency Response (48 kHz): 10 Hz to 22kHz, ±0.2 dB
Jitter (average; 700 Hz to 100 kHz): ‹ 300 ps
Stop Band Attenuation: -105 dB @48 kHz; -102 dB @96 kHz
0 dBFS: = +15 dBu
Power Consumption +15 V: max. 115 mA
Power Consumption -15 V: max. 17 mA
Dimensions (W x H x D): 3.94 x 1.06 x 3" (100 x 27 x 76 mm)
Weight: 2.39 oz. (68 g) | | Power Compatibility | Switchable
100 to 120 V / 60 Hz
220 to 240 V / 50 Hz
Fuse: 315 mA | | Power Consumption | 25 W | | Dimensions (WxHxD) | 19.0 x 3.5 x 8.3" (482 x 88 x 210 mm) | | Weight | 9.0 lb (4.1 kg) | |
The user manual for the SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD can be downloaded in .pdf
format if it did not come with your new microphone preamps, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other SPL users keep a unique electronic library
for SPL microphone preampss,
where you can use our link to download the user manual for the SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD.
The user manual lists all of the functions of the SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD,
all the basic and advanced features and tells you how to use the microphone preamps.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from SPL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD. User manuals are also
available on the SPL website under Pro Audio - Recording - Microphone Preamps.
Question and answer discussion forum concerning user instructions and resolving problems with the SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD
Post new comment to SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD
| Subject: preamp problem | | Date: 20.07.2016 23:19:14 | Author: john williams | hello i bought SPL GOLDMIKE PREAMP and NT2 RODE MIC from you and it is not working when i connect it
i connect the XLR to mic and i also connect it it to my preamp imput at...then i connect the second XLR to my preamp output then to the front mic imput of my mbox pro interface. i switch on the phatom power both on mbox pro and my preamp but i was not getting any single...help me out on how to connect my mic preamp to my mbox pro audio interface | | Reply |
Post new comment/question/response regarding the SPL GoldMike MK2 Dual-Channel Preamplifier w/ A SPLGOLDMIKEMK2AD
|
|
|
|
|
