User manual SPL Volume2 Two Channel Volume Controller SPLVOLU2
Operating instructions and pdf manual for use - SPL Volume2 Two Channel Volume Controller SPLVOLU2 User manual, User manual SPL Volume2 Two Channel Volume Controller SPLVOLU2, SPL, Volume2, Two, Channel, Volume, Controller, SPLVOLU2,
User manual for SPL Volume2 Two Channel Volume Controller SPLVOLU2
Manufacturer: SPL
Basic description and contents of package
Product classification: Pro Audio - Recording - Studio Monitor Controllers
Safety instructions
Startup and operation of the studio monitor controllers
Tips for setting up your SPL
Settings and expert assistance
Contact SPL service
Troubleshooting
Warranty information
Price: 499 USD
We recommend checking out our discussion threads on the SPL Volume2 Two Channel Volume Controller SPLVOLU2,
which address similar problems with connecting and setting up Studio Monitor Controllers SPL.
User manual for the SPL Volume2 Two Channel Volume Controller SPLVOLU2
The user manual for the SPL Volume2 Two Channel Volume Controller SPLVOLU2 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Studio Monitor Controllers.
The Volume2 Two Channel Volume Controller from SPL is a straight-forward volume control designed to be a cost-effective alternative to SPL's full featured VC units. With minimized features, this volume control unit is dedicated solely to accurate level control.
The Volume2 model is intended for stereo applications, while the Volume8 can control up to eight channels. Both devices are designed with active circuitry to circumvent the inevitable disadvantages of passive circuitry that result in impedance variation and therefore degraded linearity in frequency response.
A majority of D/A converters and sound cards provide nothing in the way of analog level monitoring control, and this means the necessity of varying signal levels at the converter outputs. The result is a lowered bit rate in the monitoring signal, which leads to commensurate loss of audio quality. So, the Volume2 gives the DAW owner the opportunity to listen through an analog-based monitor playback device to hear the sounds in the DAW, as they are, and without signal degradation.
A further, application area is in the construction of a straight playback chain, where the Volume2 is situated between the playback machine and either power amp and speakers or simply active speaker systems. In such cases, the playback machine must offer analog outputs. This provides for minimal financial and electronic efforts through the most direct possible playback path.
Common AV receivers employ VCA and DAC components which tend to produce more distortions, or the signal runs through further AD/DA converters for the volume control. Thus especially with SACD or DVD-A sources, only a high-quality analog, direct control of the source output ensures an unimpaired playback of the original information.
The Volume2 is built only with analog circuitry. It includes a large, 1.78-inch diameter graded, aluminum-clad potentiometer, offering more exact setting positioning, and an illuminated passive mute switch from ALPS. Input and outputs are over XLRs, and the power is supplied with a toroidal transformer. The more compact format housing allows for flexible desktop positioning near or below a computer monitor, and fits where other, larger format monitoring devices,might not.
As far as unbalanced connections, you can establish these easily and without adaptors - for example from CD-Players with RCA outputs or to (HiFi) power amplifiers with RCA inputs. In any case we recommend to use readily configured cables from XLR to the respective RCA or TS/TRS connector to dispense with adaptors. Ask your dealer for configured cables. It is important to pay attention to the correct polarity of the three XLR wires. With the XLR pin configuration diagram in our manuals any audio expert can ensure to select or configure appropriate cables.
If you own a SPL studio monitor controllers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the SPL Volume2 Two Channel Volume Controller SPLVOLU2 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the SPL Volume2 Two Channel Volume Controller SPLVOLU2:
Toroidal transformer: 3.5 VA Fuse: 250 mA / 230 V, 500 mA/115 V Voltage Selector: 230 / 50 Hz ‹› 115 V / 60 Hz Power Consumption: ca. 15 W
Hardware
Aluminum playback knob: 1.78" (45 mm) diameter
Dimension
8.5 x 3.1 x 8.8" (215 x 80 x 220 mm) Depth including Potentiometer & Sockets: 9.8" (245 mm)
Weight
4.18 lb (1.9 kg)
The user manual for the SPL Volume2 Two Channel Volume Controller SPLVOLU2 can be downloaded in .pdf
format if it did not come with your new studio monitor controllers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other SPL users keep a unique electronic library
for SPL studio monitor controllerss,
where you can use our link to download the user manual for the SPL Volume2 Two Channel Volume Controller SPLVOLU2.
The user manual lists all of the functions of the SPL Volume2 Two Channel Volume Controller SPLVOLU2,
all the basic and advanced features and tells you how to use the studio monitor controllers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from SPL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the SPL Volume2 Two Channel Volume Controller SPLVOLU2. User manuals are also
available on the SPL website under Pro Audio - Recording - Studio Monitor Controllers.
Question and answer discussion forum concerning user instructions and resolving problems with the SPL Volume2 Two Channel Volume Controller SPLVOLU2 - no comments have been made yet - be the first to add a comment
Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55 Posted by: jpdaval69 2024-09-10 00:50:11
I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607.
I hope you have it and I'm willing to be charged for it.
Best Regards....True Dock not recognizing hard drives - Kingwin True Dock Super-Speed USB 3.0 to TD-2535U3 Posted by: bf1955 2024-08-22 15:34:26
True Dock is not recognizing HDD, the HDD light does not come on, even though the power light does come one....