User manual TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point
Operating instructions and pdf manual for use - TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point User manual, User manual TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point, TP-Link, TL-WA901ND, 450, Mbps, Wireless, N450, Access, Point
User manual for TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point
Overall Rating: 4.0
80% of respondents would recommend this to a friend.
Startup and operation of the wireless access points
Tips for setting up your TP-Link
Settings and expert assistance
Contact TP-Link service
Troubleshooting
Warranty information
Price: 37 USD
We recommend checking out our discussion threads on the TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point,
which address similar problems with connecting and setting up Wireless Access Points TP-Link.
User manual for the TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point
The user manual for the TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Wireless Access Points.
The TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point is engineered to establish or expand a scalable high-speed wireless N network. It can also be used to connect multiple Ethernet enabled devices, such as game consoles, digital media adapters, printers or network attached storage devices to a wireless network. The APs provide support for a variety of different functions that make your wireless networking experience more versatile than ever. Now, you have the ability to enjoy a better Internet experience for downloading, gaming, video streaming or any other application you wish.
Employing IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, the access point works simultaneously through 3 antennas to Tx and Rx, in order to overcome interference and signal degradation over long distances or through physical barriers in a small office or a large apartment. This results in an amazing improvement in the wireless performance, even in a steel-and-concrete building. Most importantly, you can easily pick up the wireless network during long-distance connection where legacy 11g products may not be able to do so.
The device supports AP Client, Bridge, Universal / WDS Repeater and AP operation modes to allow for various wireless applications, providing you with a more dynamic and comprehensive experience while using your AP. Multiple operating modes assist you in the building of a wireless network for tough-to-wire locations or in getting rid of wireless dead zones.
Compatible with WI-FI Protected Setup (WPS), TL-WA901ND features a Quick Security Setup that enables you to almost instantaneously set up your security--just by pressing the "QSS" button! This automatically establishes a WPA2 secure connection, which is known to be more secure than WEP encryptions. Not only is this faster than normal security setups, it's more convenient in that there's no need to remember a password! The device supports both Personal and Enterprise encryptions.
The TL-WA901ND is capable of being powered by an Ethernet cable to simultaneously send data and electricity to wherever your AP is located--even up to 100' (30.5 m) away. This feature multiplies your options, enabling you to place the AP in the position that is most conducive to receiving the best signal, such as on the wall or ceiling of your office.
If you own a TP-Link wireless access points and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point:
Specifications
Standards
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Interface
10 / 100M Ethernet (RJ45) - supports Passive PoE
Network Protocol
Not specified by manufacturer
Data Rate
11n: Up to 450 Mbps (dynamic) 11g: Up to 54 Mbps (dynamic) 11b: Up to 11 Mbps (dynamic)
EIRP
<20 dBm
Receiver Sensitivity
270M: -68 dBm @ 10% PER 130M: -68 dBm @ 10% PER 108M: -68 dBm @ 10% PER 54M: -68 dBm @ 10% PER 11M: -85 dBm @ 8% PER 6M: -88 dBm @ 10% PER 1M: -90 dBm @ 8% PER
Frequency Range
2.4 - 2.4835 GHz
Wireless Modes
AP / Multi-SSID / AP Client / Repeater / Universal Repeater / Bridge+AP
The user manual for the TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point can be downloaded in .pdf
format if it did not come with your new wireless access points, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other TP-Link users keep a unique electronic library
for TP-Link wireless access pointss,
where you can use our link to download the user manual for the TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point.
The user manual lists all of the functions of the TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point,
all the basic and advanced features and tells you how to use the wireless access points.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from TP-Link service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point. User manuals are also
available on the TP-Link website under Computers & Solutions - Networking - Wireless Access Points.
Question and answer discussion forum concerning user instructions and resolving problems with the TP-Link TL-WA901ND 450 Mbps Wireless N450 Access Point - no comments have been made yet - be the first to add a comment