User manual Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B
Operating instructions and pdf manual for use - Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B User manual, User manual Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B, Veracity, VHW-HWPS-B, Highwire, Powerstar, Base, Unit,
User manual for Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
We recommend checking out our discussion threads on the Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B,
which address similar problems with connecting and setting up Ethernet Extenders Veracity.
User manual for the Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B
The user manual for the Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired Networking - Ethernet Extenders.
With no need to configure IP addresses, set DIP switches, or make awkward measurements and calculations, installation of the Veracity VHW-HWPS-B Highwire PowerStar Base Unit is as straightforward as plugging it in. This Powerstar base unit works with the VHW-HWPS-C Powerstar camera unit (sold separately) for delivering PoE over an RG59 cable to an IP camera. In the simplest implementation, the base unit receives Power over Ethernet power from a standard PoE switch or injector and transmits it down the coaxial cable. No external power cabling is required, and all detection and setup occurs automatically. If PoE is not available, or for an extra power boost at either end of the cable, just connect the optional power supply.
This unit features a unique SafeView display, to provide IP camera installers with an instant and easy-to-understand confirmation of correct operation from either end of the cable. Cable length and quality can be hard to predict or measure, especially in legacy upgrade scenarios, which is why SafeView includes a reassuring bar-graph display of the power available and a warning if the camera's requirement approaches it.
True Power over Ethernet Plus detection means that all PoE (IEEE 802.3af) and PoE Plus (IEEE 802.3at) cameras are fully supported, and non-PoE equipment can be safely connected as well. Careful PoE over Coax detection and management is also employed, to prevent accidental damage to legacy equipment and allow operation with other highwire devices.
The unique low-power design and efficient power delivery enables long range extension even over the low-grade cable, such as the high-resistance copper-clad steel (CCS) types found in many legacy installations. This means that legacy coax upgrades can be planned with confidence, while a quick check of the SafeView power display reaffirms that the connection will continue to be reliable, whichever the cable used.
Reliable power delivery is also ensured at the source, where either dependable screw-terminal connections or a UPS backed PoE supply can be used. And for predictable network operation with no restrictions, it delivers a full 200 Mb/s of bandwidth at 1000' (300m) of RG-59 or 1600' (500m) of RG-11 coax. If a custom application demands a greater range, simply connect sections together to deliver network connections up to 4 km (2.5 miles), at full bandwidth and with no extra power wiring.
The unit delivers reliable power at long range, even over low-grade CCS cable, and Safeview confirms it automatically on installation. In most cases the full 25W required by the most powerful PoE Plus cameras is available. The specifications below show the range achievable by cable type, power source, and camera wattage.
If you own a Veracity ethernet extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B:
Specifications
Power Source
POE over Coax Range
Camera Power
5, 10, 15, 20
Transmission Range
With POE: RG-59 (22AWG CCS): 750' (225 m) @ 5 W, 420' (125 m) @ 10 W, 330' (100 m) @ 15 W, 200' (60 m) @ 20 W
RG-59 (22AWG Core): 1,000' (300 m) @ 5 W, 1,000' (300 m) @ 10 W, 880' (265 m) @ 15 W, 650' (195 m) @ 20 W
RG-59 (20AWG Core): 1,000' (300 m) @ 5 W, 1,000' (300 m) @ 10 W, 1,000' (300 m) @ 15 W, 1,000' (300 m) @ 20 W
RG-11 (14AWG Core): 1,600' (500 m) @ 5 W, 1,600' (500 m) @10 W, 1,600' (500 m) @ 15 W, 1,600' (500 m) @ 20 W
With Veracity Power Supply(Not Included): RG-59 (22AWG CCS): 900' (270 m) @ 5 W, 880' (265 m) @ 10 W, 620' (185 m) @ 15 W, 460' (140 m) @ 20 W, 360' (110 m) @ 25 W
RG-59 (22AWG Core): 1,000' (300 m) @ 5/10/20/25 W
RG-59 (20AWG Core): 1,000' (300 m) @ 5/10/20/25 W
RG-11 (14AWG Core): 1,600' (500 m) @ 5/10/20/25 W
Power supply is sold seperately
Power
Unit Power: 1.5 W BASE POE In: IEEE 802.3af (POE) or IEEE 802.3at (POE Plus), 2-event, power class 4 DC Power Input: 57 VDC, 0.7 A maximum, class 2 isolated, detachable screw terminal
Coaxial
Connector: BNC 75 Ω Cable: Any 75 Ω coaxial (other impedances supported) Range: 1,600' (500 m) at full rate Bandwidth: 200 Mbps
Ethernet
Connector: RJ-45 Cable: Patch or crossover, auto-detected Rate: 100 Base-T full-duplex with auto-negotiation
LED Display
Indicators: Highwire coax link Ethernet link / activity POE over coax
Power available (5/10/15/20 W) Colors: Off: Disabled Green: Enabled Red: Fault
The user manual for the Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B can be downloaded in .pdf
format if it did not come with your new ethernet extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Veracity users keep a unique electronic library
for Veracity ethernet extenderss,
where you can use our link to download the user manual for the Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B.
The user manual lists all of the functions of the Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B,
all the basic and advanced features and tells you how to use the ethernet extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Veracity service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B. User manuals are also
available on the Veracity website under Surveillance - Surveillance Video - Wired Networking - Ethernet Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the Veracity VHW-HWPS-B Highwire Powerstar Base Unit VHW-HWPS-B - no comments have been made yet - be the first to add a comment