|
User manual for VITEC MGW Nano Encoder 13678
- Manufacturer: VITEC
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Analog & Digital Converters
- Safety instructions
- Startup and operation of the analog & digital converters
- Tips for setting up your VITEC
- Settings and expert assistance
- Contact VITEC service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the VITEC MGW Nano Encoder 13678,
which address similar problems with connecting and setting up Analog & Digital Converters VITEC.
|
User manual for the VITEC MGW Nano Encoder 13678
The user manual for the VITEC MGW Nano Encoder 13678 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Analog & Digital Converters.
The VITEC MGW Nano is a portable MPEG-4 H.264 encoder and streamer featuring one HD/SD-SDI and one HDMI input, Full HD processing, KLV metadata support, and hardware-based image stabilization. It's fanless and features no moving parts, offering 100% silent operation. Optimized for low-latency distribution of HD and SD video sources, it distributes IP video at broadcast-quality resolutions up to 1080p and at a wide range of bit rates and frame rates. Measuring approximately 5" x 5", it's highly compact and is capable of being deployed on UAVs.
A built-in video matrix and scaler enables frame rates and resolutions of incoming feeds to be scaled and a single video source to be routed to multiple compression cores for simultaneous encoding at up to five different resolutions and frame rates, with optional on-the-fly HD source downscaling to SD. MIL-STD certified, the MGW Nano is optimized for mission-critical ingestion and dissemination of Full Motion Video (FMV) with optional CoT and KLV metadata.
|
If you own a VITEC analog & digital converters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the VITEC MGW Nano Encoder 13678 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the VITEC MGW Nano Encoder 13678:
Video Input | 1x HD-SDI/SD-SDI (SMPTE 259M-C, SMPTE 292M, SMPTE 274M, SMPTE 296M, SMPTE 424M, SMPTE 425M) 1x HDMI (support for HDCP and non-HDCP protected sources) | Input Resolutions / Frame Rates | 1920 x 1080p @ 60, 59.94, 50, 30, 29.97, 25, 24 Hz 1920 x 1080i @ 60, 59.94, 50 Hz 1600 x 1200p @ 85, 60, 50 Hz 1366 x 768p @ 60, 50 Hz 1280 x 800p @ 60, 50 Hz 1280 x 768p @ 60, 50 Hz 1024 x 768p @ 60, 50 Hz 1280 x 720p @ 60, 59.94, 50, 30, 29.97, 25 Hz 720 x 480p @ 30, 29.97 Hz 720 x 480i @ 59.94 Hz 720 x 576p @ 25 Hz 720 x 576i @ 50 Hz | Audio Input | 1x SDI Embedded audio (Stereo and Mono) 1x HDMI Embedded audio (Stereo and Mono) | Video Output | H.264 (ISOIEC 14496-10 AVC MPEG-4 part 10):
Modes: Baseline Profile L3 Main Profile L3 and L4 High Profile L4 and L4.1 Bit Rate: 100 Kbps - 14 Mbps Frame Rate: 50-60 fps
Down Sampling Modes: Third, half, three quarters
Bit Rate Regulation Modes: Constant (CBR), Variable (VBR)
Output Resolutions: Configurable from QCIF up to 1920 x 1080p30 / 1280 x 720p60 Encoding Latency: 65 ms (TurboVideo mode) | Audio Output | MPEG-4 AAC-LC (ISO/IEC 14496-3), MPEG-1 L2 Stereo and mono modes Bit Rate: 32 Kbps - 256 Kbps in Stereo, 16 Kbps - 128 Kbps in Mono Sampling Rate: 16 kHz - 48 kHz | Network Protocols | 1x RJ45
Streaming: UDP, RTSP, SAP, MPEG-2 Transport encapsulation, unicast, and multicast modes
Peripheral: HTTPS, DHCP, NTP, SSH, SAP | Serial | 1x DB-9 | Operating Temperature | -40 to 158°F (-40 to 70°C) | Relative Humidity | 5 to 95% (non-condensing) | Safety/EMC Standard | FCC part 15 class B and CE | Certification | MIL-STD810F certified | MTBF | Ground: 9 years, Airborne: 12.7 years (as per MIL-HDBK-217F) | Dimensions | 1.4 x 5.5 x 4.7" (3.6 x 14 x 12 cm) | Weight | 1.44 lb (0.65 kg) | |
The user manual for the VITEC MGW Nano Encoder 13678 can be downloaded in .pdf
format if it did not come with your new analog & digital converters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other VITEC users keep a unique electronic library
for VITEC analog & digital converterss,
where you can use our link to download the user manual for the VITEC MGW Nano Encoder 13678.
The user manual lists all of the functions of the VITEC MGW Nano Encoder 13678,
all the basic and advanced features and tells you how to use the analog & digital converters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from VITEC service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the VITEC MGW Nano Encoder 13678. User manuals are also
available on the VITEC website under Professional Video - Signal Processing & Distribution - Analog & Digital Converters.
Question and answer discussion forum concerning user instructions and resolving problems with the VITEC MGW Nano Encoder 13678 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the VITEC MGW Nano Encoder 13678
|
|
|
|
|