|
User manual for VITEC MGW Nano H.264 AVC SD Encoder 14245
- Manufacturer: VITEC
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Analog & Digital Converters
- Safety instructions
- Startup and operation of the analog & digital converters
- Tips for setting up your VITEC
- Settings and expert assistance
- Contact VITEC service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the VITEC MGW Nano H.264 AVC SD Encoder 14245,
which address similar problems with connecting and setting up Analog & Digital Converters VITEC.
|
User manual for the VITEC MGW Nano H.264 AVC SD Encoder 14245
The user manual for the VITEC MGW Nano H.264 AVC SD Encoder 14245 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Analog & Digital Converters.
The Vitec MGW Nano H.264 AVC SD Encoder is suitable for use in IPTV, FMV, and ISR applications. It features a rugged, fanless design with no moving parts for silent operation. Optimized for low-latency distribution of HD and SD video sources, the portable encoder disseminates IP video at broadcast-quality resolutions up to Full HD 1080p (@ 60 fps). It features one HD-SDI/SD-SDI, one HDMI, one SDI embedded audio, and HDMI embedded audio inputs.
A built-in video matrix and scaler adjusts video input to any output resolution, data rate and frame rate. It allows a single video source to be routed to multiple compression cores for simultaneous encoding at up to five different resolutions and frame rates. In addition, it offers an optional on-the-fly HD source downscaling to SD. With the MIL-STD certification, the encoder is optimized for mission-critical ingestion and dissemination of Full Motion Video (FMV) with optional CoT and KLV metadata.
|
If you own a VITEC analog & digital converters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the VITEC MGW Nano H.264 AVC SD Encoder 14245 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the VITEC MGW Nano H.264 AVC SD Encoder 14245:
| Video Inputs | 1 x HD-SDI/SD-SDI (SMPTE 259M-C, SMPTE 292M, SMPTE 274M, SMPTE 296M, SMPTE 424M, SMPTE 425M)
1 x HDMI (support for HDCP and non-HDCP protected sources) | | Input Resolutions | 1920 x 1080p @ 60, 59.94, 50, 30, 29.97, 25, 24 Hz
1920 x 1080i @ 60, 59.94, 50 Hz
1600 x 1200p @ 85, 60, 50 Hz
1366 x 768p @ 60, 50 Hz
1280 x 800p @ 60, 50 Hz
1280 x 768p @ 60, 50 Hz
1024 x 768p @ 60, 50 Hz
1280 x 720p @ 60, 59.94, 50, 30, 29.97, 25 Hz
720 x 480p @ 30, 29.97 Hz
720 x 480i @ 59.94 Hz
720 x 576p @ 25 Hz
720 x 576i @ 50 Hz | | Audio Inputs | 1 x SDI embedded audio (stereo and mono)
1 x HDMI embedded audio (stereo and mono) | | Video Output | H.264 (ISOIEC 14496-10 AVC MPEG-4 part 10). Modes: Baseline Profile L3, Main Profile L3 and L4, High Profile L4 and L4.1
Bit Rate: 100 Kb/s to 14 Mb/s
Frame Rate: 5 to 60 fps. Down sampling modes: third, half, three quarters
Bit Rate Regulation Modes: Constant (CBR), Variable (VBR)
Output Resolutions: Configurable from QCIF up to 1920 x 1080p30 / 1280 x 720p60
Encoding Latency: 65 ms (TurboVideo mode) | | Audio Output | MPEG-4 AAC-LC (ISO/IEC 14496-3), MPEG-1 L2
Stereo and mono modes
Bit Rate: 32 kb/s to 256 kb/s in Stereo, 16 kb/s to 128 Kb/s in Mono
Sampling Rate: 16 kHz to 48 kHz | | Network Protocols | Streaming: UDP, RTSP, SAP, MPEG-2 Transport encapsulation, unicast and multicast modes
Peripheral: HTTPS, DHCP, NTP, SSH, SAP | | Management | Secure Web based remote management interface (HTTPS)
Dashboard with dynamically updating I/O signal detection and streaming stats
SSH interface with "get/set" or XML API for integration with 3rd party control software
Autostart mode recovers saved configuration after power cycle
Remote firmware and software upgrade capability via command line
System and channel event logging | | Security | Real-time AES encryption for video, audio and metadata. Interoperability with EZ TV and FITIS systems
Password protected HTTP and CLI control interfaces | | Metadata | CoT over serial RS-232, KLV over IP, KLV over SDI (VANC per SMPTE 336M)
UAS Datalink Local Metadata Set (MISB STD 0601.5, STD 0902)
Time Stamping and Transport of Compressed Motion Imagery and Metadata (MISB STD 0604.2)
Cursor on Target (CoT) Conversions to Key- Length-Value (KLV) Metadata (MISB EG 0805)
Security Metadata Universal and Local Sets for Digital Motion Imagery (MISB STD 0102.8)
STANAG 4609 output stream over UDP/IP | | Operating Temperature | -40 to +158ºF (-40 to +70ºC) | | Relative Humidity | 5 to 95% (non-condensing) | | Standards & Certifications | FCC part 15 class B and CE
MIL-STD810F certified | | MTBF | Ground to 9.00 years
Airborne to 12.70 years (as per MIL-HDBK-217F) | | Power | 12 VDC | | Dimensions (H x W x D) | 1.41 x 5.46 x 4.66" (36.00 x 138.85 x 118.50 mm) | | Weight | 1.44 lb (0.65 kg) | |
The user manual for the VITEC MGW Nano H.264 AVC SD Encoder 14245 can be downloaded in .pdf
format if it did not come with your new analog & digital converters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other VITEC users keep a unique electronic library
for VITEC analog & digital converterss,
where you can use our link to download the user manual for the VITEC MGW Nano H.264 AVC SD Encoder 14245.
The user manual lists all of the functions of the VITEC MGW Nano H.264 AVC SD Encoder 14245,
all the basic and advanced features and tells you how to use the analog & digital converters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from VITEC service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the VITEC MGW Nano H.264 AVC SD Encoder 14245. User manuals are also
available on the VITEC website under Professional Video - Signal Processing & Distribution - Analog & Digital Converters.
Question and answer discussion forum concerning user instructions and resolving problems with the VITEC MGW Nano H.264 AVC SD Encoder 14245 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the VITEC MGW Nano H.264 AVC SD Encoder 14245
|
|
|
|
|
