User manual for Whirlwind MD1 - Single Channel Microphone Preamp MD-1
- Manufacturer: Whirlwind
- Basic description and contents of package
- Product classification: Pro Audio - Location Sound - Field Mixers
- Safety instructions
- Startup and operation of the field mixers
- Tips for setting up your Whirlwind
- Settings and expert assistance
- Contact Whirlwind service
- Troubleshooting
- Warranty information
- Price: 307 USD
|
We recommend checking out our discussion threads on the Whirlwind MD1 - Single Channel Microphone Preamp MD-1,
which address similar problems with connecting and setting up Field Mixers Whirlwind.
|
User manual for the Whirlwind MD1 - Single Channel Microphone Preamp MD-1
The user manual for the Whirlwind MD1 - Single Channel Microphone Preamp MD-1 provides
necessary instructions for the proper use of the product Pro Audio - Location Sound - Field Mixers.
The Whirlwind MD-1 is a portable single channel microphone preamplifier with provisions for line level input and headphone output. The MD-1 features the studio-grade preamplifier found in the Whirlwind MIX-6 mixer. The front panel features a pad and level control that adjust for various mic and line level sources, providing up to 60dB of gain.
|
If you own a Whirlwind field mixers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Whirlwind MD1 - Single Channel Microphone Preamp MD-1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Whirlwind MD1 - Single Channel Microphone Preamp MD-1:
Connections | Input: 3-pin XLR male Output: 3-pin XLR female | Input Impedance | Mic mode: 1.5k ohms Line mode: 10k ohms | Output Impedance | 600 ohms | Audio Input Signal | Line mode: +18dBm balanced Mic mode: -4dBm unbalanced | Frequency Response | +/- 3dBm 6Hz to 25kHz +/- 1dBm 50Hz to 10kHz -2.0 dBm @ 20kHz | Maximum Output Level | +12 dBm into a 2k ohm load +24 dBm into a 10k ohm load +36 dBm into a 100k ohm load | THD + Noise | < 1 % 100Hz to 20kHz | Phantom Power | +18 VDC | Power Requirements | 9-Volt batteries x2 | Dimensions | 3.88 x 6.25 x 2.25" (98.55 x 158.75 x 57.15cm) (HxWxD) | Weight | 2 lb | Package Weight | 2.1 lb | Box Dimensions (LxWxH) | 6.7 x 4.3 x 2.4" | |
The user manual for the Whirlwind MD1 - Single Channel Microphone Preamp MD-1 can be downloaded in .pdf
format if it did not come with your new field mixers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Whirlwind users keep a unique electronic library
for Whirlwind field mixerss,
where you can use our link to download the user manual for the Whirlwind MD1 - Single Channel Microphone Preamp MD-1.
The user manual lists all of the functions of the Whirlwind MD1 - Single Channel Microphone Preamp MD-1,
all the basic and advanced features and tells you how to use the field mixers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Whirlwind service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Whirlwind MD1 - Single Channel Microphone Preamp MD-1. User manuals are also
available on the Whirlwind website under Pro Audio - Location Sound - Field Mixers.
Question and answer discussion forum concerning user instructions and resolving problems with the Whirlwind MD1 - Single Channel Microphone Preamp MD-1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Whirlwind MD1 - Single Channel Microphone Preamp MD-1
|
|