|
User manual for American Dynamics VideoEdge 4-CH IP Encoder w/Power over ADEIP4
- Manufacturer: American Dynamics
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders
- Safety instructions
- Startup and operation of the video encoders & decoders
- Tips for setting up your American Dynamics
- Settings and expert assistance
- Contact American Dynamics service
- Troubleshooting
- Warranty information
- Price: 902 USD
|
We recommend checking out our discussion threads on the American Dynamics VideoEdge 4-CH IP Encoder w/Power over ADEIP4,
which address similar problems with connecting and setting up Video Encoders & Decoders American Dynamics.
|
User manual for the American Dynamics VideoEdge 4-CH IP Encoder w/Power over ADEIP4
The user manual for the American Dynamics VideoEdge 4-CH IP Encoder w/Power over ADEIP4 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
The American Dynamics ADEIP4 VideoEdge 4-CH IP Encoder can be used to interface up to 4 analog CCTV cameras to a network. Once connected, these cameras are treated like conventional IP cameras and can be accessed for viewing over a LAN or WAN via a Microsoft Internet Explorer browser, Intellex Digital Video Management systems, Network Client, or Browser Client.
Analog PTZ cameras, including all American Dynamics SpeedDome's and select third party PTZ domes, can be accessed for their pan, tilt, zoom, focus, aperture control as well as to operate their preset and pattern functions.
Each camera input is paired with an alarm input port for connection to an external sensor device. Each camera is also supplied with a video loss and network disconnect detection function.
Video is encoded using American Dynamics Active Content Compression (ACC), a codec 9 times more efficient than comparable MPEG-4 and MJPEG technologies.
Optional hardware accessories are available for installing this encoder on a rack (ADEIP4RM), or wall (ADEIP4WM).
|
If you own a American Dynamics video encoders & decoders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the American Dynamics VideoEdge 4-CH IP Encoder w/Power over ADEIP4 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the American Dynamics VideoEdge 4-CH IP Encoder w/Power over ADEIP4:
Signal System | NTSC and PAL | Channels | 4 | Compression | Compression: Active Content Compression (ACC)
Compression Levels: Three quality settings (Super, Normal, Extended Record) and two sensitivity settings (Normal, High) | Resolution | NTSC Via Intellex IP: 704 x 480, 704 x 240, 352 x 240 Via Browser: Above resolutions plus 640 x 480, 640 x 240, 320 x 240
PAL Via Intellex IP: 704 x 576, 704 x 288, 352 x 288 Via Browser: Above resolutions plus 640 x 576, 640 x 288, 320 x 288 | Frame Rate | 4CIF NTSC: up to 30 IPS per channel 4CIF PAL: up to 25 IPS per channel | Built-In Card Slot | No | Video Inputs | BNC x4 | Video Outputs | No | Audio Inputs | No | Motion Detection | Video loss and network loss detection | Network Interface | Interface: RJ-45 (Ethernet 10/100 Base-T) Concurrent Streams: Up to ten (total image rate depends on resolution and content)
Bandwidth Control: Bandwidth limits can be set per camera, per stream | Network Protocol | HTTP, TCP, DHCP (client) | USB Port | No | Control Ports | Interface Type: RS-232, RS-422/485, SensorNet (American Dynamics SpeedDomes only)
Camera Controls: PTZ, focus, aperture, menu, presets (depending on camera model)
Camera Protocols: American Dynamics, Pelco P, Pelco D, Bosch, BBV StarCard | Alarm I/O | 4 alarm inputs | Text Insert | Text Inputs: Up to four serial text streams (one is shared with RS-422 PTZ control)
Input Type: ASCII text on RS-232
Connector Type: Four each RJ-45 | Configuration | Remote, via web browser | System Requirements | Web Browser Requirements: MS IE 6.x, MS IE 7.x, Java Script | Security | Multi-level password protected access | Mounting | Rack, wall, desk | Power Requirements | 12VDC (2.5mm power jack) / PoE | Power Consumption | 12W max | Operating Temperature | 32 - 122°F (0 - 50°C) | Dimensions (WxHxD) | 4.4 x 1.7 x 8.7" (11.3 x 4.3 x 22.1cm) | Weight | 1.3 lbs (0.6kg) | Package Weight | 1.0 lb | Box Dimensions (LxWxH) | 11.9 x 6.8 x 4.7" | |
The user manual for the American Dynamics VideoEdge 4-CH IP Encoder w/Power over ADEIP4 can be downloaded in .pdf
format if it did not come with your new video encoders & decoders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other American Dynamics users keep a unique electronic library
for American Dynamics video encoders & decoderss,
where you can use our link to download the user manual for the American Dynamics VideoEdge 4-CH IP Encoder w/Power over ADEIP4.
The user manual lists all of the functions of the American Dynamics VideoEdge 4-CH IP Encoder w/Power over ADEIP4,
all the basic and advanced features and tells you how to use the video encoders & decoders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from American Dynamics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the American Dynamics VideoEdge 4-CH IP Encoder w/Power over ADEIP4. User manuals are also
available on the American Dynamics website under Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
Question and answer discussion forum concerning user instructions and resolving problems with the American Dynamics VideoEdge 4-CH IP Encoder w/Power over ADEIP4 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the American Dynamics VideoEdge 4-CH IP Encoder w/Power over ADEIP4
|
|
|
|
|