User manual Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038
Operating instructions and pdf manual for use - Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038 User manual, User manual Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038, Areca, ARC-4038, 8-Bay, 12Gb/s, SAS, Tower, JBOD,
User manual for Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038
We recommend checking out our discussion threads on the Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038,
which address similar problems with connecting and setting up NAS Enclosures Areca.
User manual for the Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038
The user manual for the Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038 provides
necessary instructions for the proper use of the product Computers & Solutions - Drives & Storage - NAS Enclosures.
The ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure from Areca offers a compact external storage chassis capable of accommodating up to 8 12Gb/s, Serial-Attached SCSI (SAS) drives or 6Gb/s Serial ATA (SATA) drives. The box can support both 2.5" and 3.5" disk drives, each one contained in its individual hole on the disk carrier. This compact tower supports four 12Gb/s SFF-8644 and one 6Gb/s SFF-8088 SAS host and expansion connections. Out-of-band CLI can re-define manufacture default setting on those connections. Configuration and environmental information is accessible either via in-band (SES-3.0 over SMP) or out-of-band serial port.
The ARC-4038 includes 8 internal plus 20 external 12Gb/s SAS ports connection for host and easy expansion. It features SAS and LSI DataBolt bandwidth optimizer technology. This enclosure is compatible with 12Gb/s SAS-enabled systems as well as 6Gb/s drives and backplanes. Using DataBolt, the ARC-4038 buffers 6Gb/s data and then transfers it out to the host at 12Gb/s speeds in order to match the bandwidth between faster hosts and slower SAS or SATA devices.
The ARC-4038 contains an embedded expander manager that can access via in-band SES-3.0 over SMP protocol and out-of band RS-232 port. The ARC-4038 expander firmware and EPLD has implemented the SES-3.0 protocol and disk activity map to the individual fault/activity status indicator on the backplanes. It has implemented autonomous chassis management of power supply status connectors and two fan monitor/speed control connectors through the SES-3.0 protocol. The hardware monitor can monitor system voltage and temperature and the warning message will be shown in alarm buzzer and by the corresponding LED.
If you own a Areca nas enclosures and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038:
Specifications
SAS / SATA Connectivity
SAS hard drives: Up to 8 x 2.5" or 3.5" SAS hot-plug hard drives (12.0 Gb/s) at speeds of 7.2K, 10K or 15K RPM
SATA hard drives: Up to 8 x 2.5" or 3.5" SATA hot-plug hard drives (6.0 Gb/s) at speeds of 7.2K or 10K RPM
JBOD Controller Modules
Expander board: 1 module Sensors: 1 sensor on the expander board
Backplane
8 x SAS hard-drive connectors 1 x power supply connector 2 x cooling fan module connectors 1 x sets of expander board connector
Back Panel Connectors
I/O connectors: 2 x SFF-8644 + 1 x SFF-8088 "Host In" connectors for connection to the host 2 x SFF-8644 "Expansion Out" connectors for expansion to an additional JBOD enclosure
Management connectors: 1 x 6-pin UART RJ-11 connector 1 x RJ-45 LAN connector (manufacture manager only)
LED Indicators
Hard-drive carrier: 1 x Blue single-color activity LED 1 x Two-color LED status indicator per drive
Expander board: 2 x One-color LED status indicators for each SAS host port, one for SAS host port link and one for the activity status 2 x One-color LED status indicators for each SAS expansion port, one for SAS expansion port link and one for the activity state
Wattage
220 W maximum continuous
Voltage
90-256 V rated, 50/60 Hz
Amperage
12 V/16 A, 5 V/16 A, 3.3 V/14 A
Operating Temperature
32 to 104°F (0 to 40°C)
Storage Temperature
-40 to 140°F (-40 to 60°C)
Operating Humidity (Relative)
10 to 80% (non-condensing)
Storage Humidity
5 to 95% (non-condensing)
Dimensions
11.89 x 5.75 x 11.42" (302 x 146 x 290 mm)
Weight
14.9 lb (6.8 kg)
The user manual for the Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038 can be downloaded in .pdf
format if it did not come with your new nas enclosures, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Areca users keep a unique electronic library
for Areca nas enclosuress,
where you can use our link to download the user manual for the Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038.
The user manual lists all of the functions of the Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038,
all the basic and advanced features and tells you how to use the nas enclosures.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Areca service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038. User manuals are also
available on the Areca website under Computers & Solutions - Drives & Storage - NAS Enclosures.
Question and answer discussion forum concerning user instructions and resolving problems with the Areca ARC-4038 8-Bay 12Gb/s SAS Tower JBOD Enclosure ARC-4038 - no comments have been made yet - be the first to add a comment