|
User manual for Audix RAD360 Wireless Bodypack System with L5 W3-L5-O B
- Manufacturer: Audix
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Wireless Systems
- Safety instructions
- Startup and operation of the wireless systems
- Tips for setting up your Audix
- Settings and expert assistance
- Contact Audix service
- Troubleshooting
- Warranty information
- Price: 749 USD
|
We recommend checking out our discussion threads on the Audix RAD360 Wireless Bodypack System with L5 W3-L5-O B,
which address similar problems with connecting and setting up Wireless Systems Audix.
|
User manual for the Audix RAD360 Wireless Bodypack System with L5 W3-L5-O B
The user manual for the Audix RAD360 Wireless Bodypack System with L5 W3-L5-O B provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Wireless Systems.
The Audix RAD360 Wireless Bodypack System with L5 Omnidirectional Lavaliere Microphone with Capsule is a frequency agile UHF wireless microphone system with 193 selectable frequencies (per system group) and dual tuner, true diversity receivers. Operating in the UHF band between 614 to 638 MHz and 638 to 662 MHz, the RAD360 is designed for a wide range of professional applications including live performances, fixed installations, corporate meetings, and houses of worship.
|
If you own a Audix wireless systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Audix RAD360 Wireless Bodypack System with L5 W3-L5-O B in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Audix RAD360 Wireless Bodypack System with L5 W3-L5-O B:
| Frequency Range | 614 to 638 MHz & 638 to 662 MHz | | Switchable Frequencies | 193 (per system group of 24 MHz spaced 125 kHz apart) | | Frequency Response | 40 Hz to 18 kHz (depending on capsule) | | Signal to Noise Ratio | > 110 dB | | Compander | HDX | | Pilot Tone | 32.768 kHz | | Receiving System | Dual tuners, true diversity receiver | | Image Rejection | 50 dB nominal, 45 dB minimum | | Signal to Noise Ratio | 110 dB @ 30 kHz deviation (IEC-weighted), maximum modulation 75 kHz | | Total Harmonic Distortion | 1% (10 kHz deviation at 1 kHz) | | Sensitivity | 26 dBμV (S/N 60 dB at 5 kHz deviation, IEC-weighted) < 2.5 μV | | Frequency | Intermediate: 55.875 & 10.7 MHz | | Audio Output | Unbalanced: 40 mV (at 1 kHz, 10 kHz deviation, 10 kΩ load)
Balanced: 8 mV (at 1 kHz, 10 kHz deviation, 600 Ω load)
(AF Level set at 0) | | Output Connectors | Unbalanced: 1/4" phone jack
Balanced: XLR | | Deviation | Nominal Peak Deviation
Balanced: -24 to 18 dBu
Unbalanced: -30 to 12 dBu (adjustable in 6 dB steps) | | Adjacent Channel Rejection | > 68 dB | | Intermodulation Spacing | > 68 dB | | Image Rejection | > 72 dB | | Power Supply | 120 VAC 60 Hz; 12 to 18 VDC, 350 mA, with external supply | | Dimensions (W x H x D) | 8.4 x 1.1 x 6.5" (212 x 27.9 x 165.1 mm) | | Weight | 2.32 lb (1.05 kg) | | RF Power Output | 50 mW maximum | | Spurious Emission | Under federal regulations | | Input Connector | 3-pin mini-XLR | | Control Input | Mic/line switch, and 20 dB potentiometer | | Battery | 2 x AA 1.5 V (sold separately) | | Current Consumption | 100 mA typical | | Battery Life | Approximately 12 hours | | Input Impedance | Mic: 10 kΩ
Line: 1 MΩ | | Maximum SPL | 128 to 140 dB approximately (depending on mic) | | Dimensions (L x W x D) | 4.0 x 2.8 x 1.0" (101.6 x 71.1 x 25.4 mm) | | Weight | 7.2 oz (204.1 g) (with battery) | | Transducer Type | Pre-polarized condenser | | Frequency Response | 20 Hz to 20 kHz | | Polar Pattern | Omnidirectional | | Output Impedance | 200 Ω balanced | | Sensitivity | 8 mV / Pa @ 1 kHz | | Equivalent Noise Level | 30 dB (A-weighted) | | Signal to Noise Ratio | 64 dB | | Power Requirements | 9 to 48 V Phantom Power | | Maximum SPL | ≥ 134 dB | | Connecting Cable | Cable/Connector: Shielded 3.0' (91.4 cm) terminating to a miniature 3-pin XLR-F connector | | Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 | | Material | Machined brass | | Length | 0.91" (23.11 mm) | | Weight | 0.02 oz (0.57 g) | | Package Weight | 6.7 lb | | Box Dimensions (LxWxH) | 15.197 x 13.622 x 3.858" | |
The user manual for the Audix RAD360 Wireless Bodypack System with L5 W3-L5-O B can be downloaded in .pdf
format if it did not come with your new wireless systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Audix users keep a unique electronic library
for Audix wireless systemss,
where you can use our link to download the user manual for the Audix RAD360 Wireless Bodypack System with L5 W3-L5-O B.
The user manual lists all of the functions of the Audix RAD360 Wireless Bodypack System with L5 W3-L5-O B,
all the basic and advanced features and tells you how to use the wireless systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Audix service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Audix RAD360 Wireless Bodypack System with L5 W3-L5-O B. User manuals are also
available on the Audix website under Pro Audio - Live Sound - Wireless Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Audix RAD360 Wireless Bodypack System with L5 W3-L5-O B - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Audix RAD360 Wireless Bodypack System with L5 W3-L5-O B
|
|
|
|
|
