User manual Audix TM1 Test & Measurement Microphone TM1 PLUS
Operating instructions and pdf manual for use - Audix TM1 Test & Measurement Microphone TM1 PLUS User manual, User manual Audix TM1 Test & Measurement Microphone TM1 PLUS, Audix, TM1, Test, Measurement, Microphone, TM1, PLUS,
User manual for Audix TM1 Test & Measurement Microphone TM1 PLUS
We recommend checking out our discussion threads on the Audix TM1 Test & Measurement Microphone TM1 PLUS,
which address similar problems with connecting and setting up Stereo & Specialty Audix.
User manual for the Audix TM1 Test & Measurement Microphone TM1 PLUS
The user manual for the Audix TM1 Test & Measurement Microphone TM1 PLUS provides
necessary instructions for the proper use of the product Pro Audio - Location Sound - Stereo & Specialty.
The Audix TM1 Test & Measurement Microphone features a 6mm pre-polarized condenser element with a wide, linear and accurate frequency response for test and measurement analysis, acoustic calibration, real-time analyzers, ambient room capturing and more. The TM1 features a flat frequency response of 20Hz to 25kHz for accurate reproduction and pristine detail. Its 6mm capsule features an omnidirectional polar pattern with a linear response at the direct and off-axis sections of the microphone. The TM1 is features a 4-plate brass construction, switchcraft XLR output, nickel plate finish and shock absorbent o-rings.
If you own a Audix stereo & specialty and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Audix TM1 Test & Measurement Microphone TM1 PLUS in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Audix TM1 Test & Measurement Microphone TM1 PLUS:
Specifications
Transducer
Pre-polarized condenser
Frequency Response
20Hz to 25kHz +/-2dB
Polar Pattern
Omnidirectional
Output Impedance
200 Ohms
Sensitivity
6.5mV / Pa @ 1k
Max Input Sound Level (SPL)
130dB with distortion < 1% 140dB Max
Signal-to-Noise Ratio
66dB
EIN
28dB (A weighted)
Dynamic Range
112dB
Connector
Switchcraft male XLR
Power
18-52 volts phantom
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
The user manual for the Audix TM1 Test & Measurement Microphone TM1 PLUS can be downloaded in .pdf
format if it did not come with your new stereo & specialty, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Audix users keep a unique electronic library
for Audix stereo & specialtys,
where you can use our link to download the user manual for the Audix TM1 Test & Measurement Microphone TM1 PLUS.
The user manual lists all of the functions of the Audix TM1 Test & Measurement Microphone TM1 PLUS,
all the basic and advanced features and tells you how to use the stereo & specialty.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Audix service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Audix TM1 Test & Measurement Microphone TM1 PLUS. User manuals are also
available on the Audix website under Pro Audio - Location Sound - Stereo & Specialty.
Question and answer discussion forum concerning user instructions and resolving problems with the Audix TM1 Test & Measurement Microphone TM1 PLUS - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the Audix TM1 Test & Measurement Microphone TM1 PLUS - no comments have been made yet - be the first to add a comment