|
User manual for Autoscript TallyPlus Single Digit Tally Display TALLY-PLUS
- Manufacturer: Autoscript
- Basic description and contents of package
- Product classification: Professional Video - Studio & EFP Equipment - Teleprompter Accessories
- Safety instructions
- Startup and operation of the teleprompter accessories
- Tips for setting up your Autoscript
- Settings and expert assistance
- Contact Autoscript service
- Troubleshooting
- Warranty information
- Price: 549 USD
|
We recommend checking out our discussion threads on the Autoscript TallyPlus Single Digit Tally Display TALLY-PLUS,
which address similar problems with connecting and setting up Teleprompter Accessories Autoscript.
|
User manual for the Autoscript TallyPlus Single Digit Tally Display TALLY-PLUS
The user manual for the Autoscript TallyPlus Single Digit Tally Display TALLY-PLUS provides
necessary instructions for the proper use of the product Professional Video - Studio & EFP Equipment - Teleprompter Accessories.
The +TallyPlus+ Single Digit Tally Display from Autoscript is a camera-numbering system and a tally indicator in one compact package. In live broadcast environments, it is essential that the talent to look into the right camera at the right time. This unit features a 2.25" tall 7 segment LED indicator, which displays numbers from 0 to 9 in green when the camera is in standby mode and in red when the camera goes live, providing a definite visual cue to the presenter.
Designed to retrofit the entire Autoscript TFT range, the +TallyPlus+ switches from green to red via an internal sensor (photoelectric cell) that attaches to your camera tally (cue) light. It also features a second photoelectric cell built into the rear for uninterrupted operation.
The LED is powered via a 12 VDC power outlet directly on the prompter, although an external power source can be used if required. The lightweight (0.7 lb / 0.28 kg) +TallyPlus+ is easy to install and screws on to the front edge of your Autoscript TFT prompter.
|
If you own a Autoscript teleprompter accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Autoscript TallyPlus Single Digit Tally Display TALLY-PLUS in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Autoscript TallyPlus Single Digit Tally Display TALLY-PLUS:
Character Display | 0 to 9 | Size | 2.25" (5.72 cm) | Number Selection | Rotary switch (rotate until the desired number 0 - 9 is shown on the display) | Sensor Trim | Opto Sensor trim control - adjust for clean switching of internal or external opto sensor | Tally Signal Input | Voltage: Senses a positive logic signal applied to the input and switches display redPositive voltage (>2.5 V, < 12.5 V) = red,Voltage <1.0 V or contact open = green | Opto Sensor Input | Resistance range: Light dependent resistor, 20 kohm at 10 Lux, 5 kohm, at 100 lux OR (grounding) contact closure < 1 kohm impedance | Power | 12 V DC, 0.25 A | EMC Compatibility | Standard: EN55022:1998 (+A1 / A2)EN61000-6-2:2001 CFR 47 : 2004 | Temperature Range | Operating: 41 to 104° F (5 to 40° C)Storage: -4 to 140° F (-20 to 60° C) | Dimensions (WxHxD) | 2.36 x 3.23 x 1.22" / 60 x 82 x 31 mm (excluding controls / connectors and wingplate) | Weight | 0.33 lb / 0.15 kg | |
The user manual for the Autoscript TallyPlus Single Digit Tally Display TALLY-PLUS can be downloaded in .pdf
format if it did not come with your new teleprompter accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Autoscript users keep a unique electronic library
for Autoscript teleprompter accessoriess,
where you can use our link to download the user manual for the Autoscript TallyPlus Single Digit Tally Display TALLY-PLUS.
The user manual lists all of the functions of the Autoscript TallyPlus Single Digit Tally Display TALLY-PLUS,
all the basic and advanced features and tells you how to use the teleprompter accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Autoscript service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Autoscript TallyPlus Single Digit Tally Display TALLY-PLUS. User manuals are also
available on the Autoscript website under Professional Video - Studio & EFP Equipment - Teleprompter Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Autoscript TallyPlus Single Digit Tally Display TALLY-PLUS - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Autoscript TallyPlus Single Digit Tally Display TALLY-PLUS
|
|
|
|
|