|
User manual for Behringer Eurocom MA4008 Installed Sound Multi-Function MA4008
- Manufacturer: Behringer
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Mixer/Amplifiers
- Safety instructions
- Startup and operation of the mixer/amplifiers
- Tips for setting up your Behringer
- Settings and expert assistance
- Contact Behringer service
- Troubleshooting
- Warranty information
- Price: 250 USD
|
We recommend checking out our discussion threads on the Behringer Eurocom MA4008 Installed Sound Multi-Function MA4008,
which address similar problems with connecting and setting up Mixer/Amplifiers Behringer.
|
User manual for the Behringer Eurocom MA4008 Installed Sound Multi-Function MA4008
The user manual for the Behringer Eurocom MA4008 Installed Sound Multi-Function MA4008 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Mixer/Amplifiers.
The Behringer Eurocom MA4008 Installed Sound Multi-Function Mixing-Amplifier allows you to distribute audio and page listeners within two speaker zones. The unit consists of two Class-D mono amplifiers, one for high-performance low-impedance speakers and the other for 70- or 100-volt speakers. It features eight channels of mic/line inputs on Euroblock connectors with switchable phantom power, individual trim pots, and post-trim LED level indicators. In parallel, the device also includes four switchable microphone XLR/line TRS combination jacks with phantom power switches, and four dual summed to mono RCA jacks for sources such as MP3 players and TV tuners.
In addition to the two main outputs, the mixer-amplifier also includes a pre-master main mix output for recording and a line-level send and receive loop for external effect processing. The unit is capable of up to 80 watts of output. The front panel features level controls for each input, as well as high and low equalization settings for adjusting the main mix output. The mixer-amplifier is designed for installed sound applications that require continuous operation, distributed music, and paging such as education, business, retail, fitness, and hospitality.
|
If you own a Behringer mixer/amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Behringer Eurocom MA4008 Installed Sound Multi-Function MA4008 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Behringer Eurocom MA4008 Installed Sound Multi-Function MA4008:
Type | Mic/Line Inputs 1 & 2: 2 x XLR / 1/4" TRS combo Jacks 2 x 4-pin Euroblock in parallel
Mic/Line Inputs 3 & 4: 2 x XLR / 1/4" TRS combo jacks 2 x 3-pin Euroblock in parallel
Mic/Line Inputs 5-8: 4 x 3-Pin Euroblock, electronically balanced
Auxiliary: 4 x RCA stereo summed
Telephone/Page: 1 x 4-pin Euroblock
Power amp input: 1 dual RCA Jack | Input Impedance | Mic Inputs 1-8: -50 to 0 dBV at 600 Ω, electronically balanced
Line Inputs 1-8: -27 to 0 dBV at 600 Ω, electronically balanced
Auxiliary: -10 dBV, 10 kΩ, unbalanced
Tel/Page Input:
Mic: -50 to 0 dBV at 600 Ω
Line: -27 to 0 dBV at 600 Ω
Power Amp Input: 0 dBV, 600 Ω, unbalanced | Phantom Power | Inputs 1-8 and Telephone/Page: 24 VDC, switchable | Type | Amplifier output: 1 x 4-pin female Euroblock LO-Z: 2 terminals @ 4 Ω HI-Z: 2 terminals @ 70 V/100 V, switchable Output regulation: <2 db, no load to full load Preamp output: 1 x dual RCA jack Z2/Mono output: 1 x dual RCA jack Record output: 1 x dual RCA jack | Output Impedance | Preamp output: 0 dBV, 600 Ω, unbalanced Z2/Mon output: 0 dBV, 600 Ω, unbalanced Record output: 0 dBV, 600 Ω, unbalanced | Channels | LO-Z: 1 x 4 Ω, minimum HI-Z: 1 x 70/100 V, switchable | Power Output | LO-Z 1% THD, 1 kHZ sine wave: 80 W RMS at 8 Ω 160 W RMS @ 4 Ω
HI-Z 1% THD, 1 kHz sine wave: 80 W RMS at 70 V 80 W RMS at 100 V | Minimum Load Impedance | LO-Z 1% THD, 1 kHZ sine wave: 4 Ω
HI-Z 1% THD, 1 kHz sine wave: 62 Ω at 70 V 125 Ω at 100 V | Control Connectors | Remote: 1 x 5-pin Euroblock connector
Tel/Page: 1 x 4-pin Euroblock, 1 terminal
Inputs 1 & 2: 2 x 4-pin Euroblock, 1 terminal each | Volume | Remote: 10 kΩ linear-taper potentiometer | Power | Remote: +5 VDC, 100 mA | DC Power Requirements | Remote: +5 VDC, 100 mA Current limited, short circuit protected | Mute | Remote: NO-voltage make contact input; open voltage 5 VDC Short circuit: <10 ma
Tel/Page: 1 x 4-pin Euroblock, 1 terminal
Inputs 1 & 2: No-voltage make contact input, open voltage 24 VDC Short circuit: <10 mA | Dynamic Range | Mic: 65 dB Line: 80 dB | Distortion (THD) | 0.5% of rated power at 1 kHz | Frequency Response | 50 to 18,000 Hz ±2 dB | Tone Controls | Low: ± 12 dB at 100 HZ High: ± 12 dB at 10 kHz | Indicators | Power: LED ring illumination (yellow) Overload/protection: LED ring illumination (red) Output Level: LED VU output meter (yellow and red while clipping) | Mains | Voltage: Switchable 115 or 230 VAC at 50/60 Hz Connector: Standard IEC receptacle | Fuse | T 5 AH 250 V / T 2.5 AH 250 V | Power Efficiency | 68% (max) | Power Consumption | Idle: 52 W 1/8 power: 70 W 1/3 power: 113 W Full power: 234 W | Dimensions (H x W x D) | 3.5 x 17 x 16" (88 x 432 x 406 mm) | Weight | 10.2 lb (4.6 kg) | Package Weight | 16.1 lb | Box Dimensions (LxWxH) | 22.7 x 16.9 x 7.3" | |
The user manual for the Behringer Eurocom MA4008 Installed Sound Multi-Function MA4008 can be downloaded in .pdf
format if it did not come with your new mixer/amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Behringer users keep a unique electronic library
for Behringer mixer/amplifierss,
where you can use our link to download the user manual for the Behringer Eurocom MA4008 Installed Sound Multi-Function MA4008.
The user manual lists all of the functions of the Behringer Eurocom MA4008 Installed Sound Multi-Function MA4008,
all the basic and advanced features and tells you how to use the mixer/amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Behringer service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Behringer Eurocom MA4008 Installed Sound Multi-Function MA4008. User manuals are also
available on the Behringer website under Pro Audio - Installation Sound - Mixer/Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Behringer Eurocom MA4008 Installed Sound Multi-Function MA4008 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Behringer Eurocom MA4008 Installed Sound Multi-Function MA4008
|
|
|
|
|