|
User manual for Blackmagic Design ATEM Studio Converter 2 SWRCONVRCK2
- Manufacturer: Blackmagic Design
- Basic description and contents of package
- Product classification: Professional Video - Camcorder & Camera Peripherals - Studio & EFP Camera Accessories
- Safety instructions
- Startup and operation of the studio & efp camera accessories
- Tips for setting up your Blackmagic Design
- Settings and expert assistance
- Contact Blackmagic Design service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Blackmagic Design ATEM Studio Converter 2 SWRCONVRCK2,
which address similar problems with connecting and setting up Studio & EFP Camera Accessories Blackmagic Design.
|
User manual for the Blackmagic Design ATEM Studio Converter 2 SWRCONVRCK2
The user manual for the Blackmagic Design ATEM Studio Converter 2 SWRCONVRCK2 provides
necessary instructions for the proper use of the product Professional Video - Camcorder & Camera Peripherals - Studio & EFP Camera Accessories.
The Blackmagic Design Studio Converter 2 inputs SDI video signals transmitted over optical fiber and converts the signals to SDI for use with video switchers. When used in conjunction with the Blackmagic Design ATEM Camera Converter, you can send video signals up to 28 miles between camera and switcher using available optical fiber cables. By comparison sending an HD-SDI signal over traditional copper cable is usually limited to about 300 feet, depending on the quality of the cable.
A typical set up using the Studio Converter 2 is to connect it between the switcher and up to four ATEM Camera Converter units. This set up allows the Converter 2 to receive the signals from the fiber cable, convert the signals to SDI using 10-bit processing, and send the signals to the switcher. The Converter 2 supports SD/HD signals, and when using the available ATEM Camera Converter you can use any camera with an SDI/HDMI output.
The converter 2 can also be used as 4 independent simultaneous bi-directional SD/HD-SDI to optical converters. The converter 2 features a built-in mic input, speaker and headphone jack that provides talkback audio for communicating with camera operators. The Converter 2 passes tally signals embedded in the SDI program stream. You can cascade multiple ATEM Studio Converter 2 units together when using more than 4 cameras. The Studio Converter 2 features a 1RU design with built in rack mount ears for easy integration into existing studio configurations or production cases.
|
If you own a Blackmagic Design studio & efp camera accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Blackmagic Design ATEM Studio Converter 2 SWRCONVRCK2 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Blackmagic Design ATEM Studio Converter 2 SWRCONVRCK2:
| HD Format Support | SDI
1080p 60/59.94/50/30/29.97/25/24/23.98
1080PsF 30/29.97/25/24/223.98
1080i 60/59.94/50/
720p 60/59.94/50 | | SD Format Support | NTSC: 525i 59.94
PAL: 625i 50 | | SDI Video Input | 4 x 10 bit SD/HD switchable camera inputs
1 x 10 bit SD/HD switchable program input from switcher, including Tally information embedded in the SDI signal | | SDI Compliance | SMPTE 259M, SMPTE 292M | | Video Sampling | 4:2:2 | | Color Precision | 10-bit | | Color Space | REC 601
REC 709 | | Optical Fiber Video Input | 4 x single mode SD/HD switchable camera inputs with LC connector | | Optical Fiber | Input
4 x single mode LC connectors for video with embedded audio
Channels 1 & 2 are camera audio
Channels 15 & 16 are talkback audio
Output
4 x single mode LC connectors for video with embedded audio
Channels 1 & 2 are camera audio
Channels 15 & 16 are talkback audio | | Audio Sampling | 48 KHz
24-bit A/D conversion | | Analog Audio Output | 4 x 3-Pin XLR Balanced Audio Pairs (1 x pair per fiber input)
2 x RCA jacks provide a L/R stereo pair | | Talkback | 1 x 1/4" TRS headphone jack
1 x .206" TRS mic input for use with aviation style headset
1 x 3-pin XLR connector for talkback microphone
1 x integrated speaker | | Talkback Control | 8 x Front panel buttons for camera operator selection, lock, mute and un-mute | | AES/EBU Talkback Loops | Input
1 x BNC mic input
1 x BNC headphone input
Output
1 x BNC mic output
1 x BNC headphone output | | OS Compatibility | Mac
OS X 10.7 Lion and later
OS X 10.8 Mountain Lion and later
Windows
Windows 7
Windows 8 | | Computer Interface | 1 x mini-B type USB 2.0 connector for initial setup, firmware updates and Converter Utility software control | | Temperature | Operating
32 to 104°F (0 to 40°C)
Storage
-4 to 113°F (-20 to 45°C) | | Power Requirements | 110 - 220V AC, 50/60 Hz
12 - 31 V DC redundant input
Note: IEC powercord is required/not included, redundant power supply not included | | Dimensions (H x W) | 1.7 x 18.9" (44 x 482 mm)
1RU size with built-in rack mount ears | | Weight | 4 lb (1.81 kg) | | Package Weight | 5.05 lb | | Box Dimensions (LxWxH) | 19.2 x 7.5 x 3.4" | |
The user manual for the Blackmagic Design ATEM Studio Converter 2 SWRCONVRCK2 can be downloaded in .pdf
format if it did not come with your new studio & efp camera accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Blackmagic Design users keep a unique electronic library
for Blackmagic Design studio & efp camera accessoriess,
where you can use our link to download the user manual for the Blackmagic Design ATEM Studio Converter 2 SWRCONVRCK2.
The user manual lists all of the functions of the Blackmagic Design ATEM Studio Converter 2 SWRCONVRCK2,
all the basic and advanced features and tells you how to use the studio & efp camera accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Blackmagic Design service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Blackmagic Design ATEM Studio Converter 2 SWRCONVRCK2. User manuals are also
available on the Blackmagic Design website under Professional Video - Camcorder & Camera Peripherals - Studio & EFP Camera Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Blackmagic Design ATEM Studio Converter 2 SWRCONVRCK2 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Blackmagic Design ATEM Studio Converter 2 SWRCONVRCK2
|
|
|
|
|
