Operating instructions and pdf manual for use - Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43 User manual, User manual Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43, Blonder, Tongue, BIDA, 75A-43, Two-Way, Broadb
User manual for Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43
Manufacturer: Blonder Tongue
Basic description and contents of package
Product classification: Professional Video - Signal Processing & Distribution - RF Equipment
Safety instructions
Startup and operation of the rf equipment
Tips for setting up your Blonder Tongue
Settings and expert assistance
Contact Blonder Tongue service
Troubleshooting
Warranty information
Price: 599 USD
We recommend checking out our discussion threads on the Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43,
which address similar problems with connecting and setting up RF Equipment Blonder Tongue.
User manual for the Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43
The user manual for the Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - RF Equipment.
The BIDA 5800 series, BIDA 75A-43 Two-Way Broadband Indoor Distribution Amplifier by Blonder Tongue features a 49 to 750MHz RF bandpass and a flat operating gain of 43dB. This self-contained two-way broadband indoor distribution amplifier with active return path is designed specifically for CATV and SMATV signal distribution systems which use a cable drop as a signal source.
The BIDA 75A-43 amplifier is configured for two-way operation with a passive sub-channel return path for 5 to 36MHz bandpass. The return gain is about 20dB when it is in active mode. Lower operating gains can be achieved by adjusting the variable attenuator. This model can be attenuated over a range of 10dB in the forward path and 18dB in the return path. Gain and slope controls are located on the front panel for easy set-up and adjustment. Two -30dB back-matched test points are provided to allow testing without service interruption.
In applications where input signals are too high or where greater cable equalization is necessary, this BIDA active return path amplifier can be reconfigured by using optional plug-in fixed attenuators (forward and return) and cable slope equalizers (forward) to meet particular requirements. Push-pull hybrid IC modules enable the amplifier to operate at high output levels while retaining low distortion characteristics. The aluminium chassis is designed to provide excellent heat dissipation thus allowing operation at high ambient temperatures with no degradation of performance.
The unit features a 36/49MHz split for passive return path operation. It can be re-configured to active return path operation by re-positioning 3 internal jumpers. An optional BIDA-FA plug-in fixed attenuator can be used for reducing forward and/or return gain from 1 to 20dB in 1dB steps. The amplifier is powered by means of an external 26VAC transformer, which also enables it to be remotely powered via low voltage AC wiring.
If you own a Blonder Tongue rf equipment and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43:
Specifications
Gain
43 dB
Frequency Range
49 - 750 MHz
Test Port Level
Input: -30 dB Output: ±2 dB
Gain Control Range
10 dB
Slope Control Range
8 dB
Hum Modulation
-70 dB
Impedance
All ports: 75 Ω
Return Loss
Input: 16 dB Output: 16 dB
Power Requirements
26 VAC
Power Supply
105 - 130 VAC, 60 Hz, 0.38 A (maximum) wall power transformer
Channel Loading
110
Flatness
±0.75 dB
Hybrid Technology
Push-pull
Noise Figure
8.5 dB measured at full gain with 0 dB slope
Output Level
36/44 dBmV
Test Port Return Loss
Input: 20 dB Output: 20 dB
Operating Temperature Range
-20 to 60°
Composite Triple Beat
-56 dB
Cross Modulation
-60 dB
Composite Second Order
-59 dB at rated output capability and channel loading
The user manual for the Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43 can be downloaded in .pdf
format if it did not come with your new rf equipment, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Blonder Tongue users keep a unique electronic library
for Blonder Tongue rf equipments,
where you can use our link to download the user manual for the Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43.
The user manual lists all of the functions of the Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43,
all the basic and advanced features and tells you how to use the rf equipment.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Blonder Tongue service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43. User manuals are also
available on the Blonder Tongue website under Professional Video - Signal Processing & Distribution - RF Equipment.
Question and answer discussion forum concerning user instructions and resolving problems with the Blonder Tongue BIDA 75A-43 Two-Way Broadband Indoor BIDA 75A-43 - no comments have been made yet - be the first to add a comment
Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55 Posted by: jpdaval69 2024-09-10 00:50:11
I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607.
I hope you have it and I'm willing to be charged for it.
Best Regards....