|
User manual for Bogen Communications Orator 1 Voice Reinforcement System ORATOR1
- Manufacturer: Bogen Communications
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Mixer/Amplifiers
- Safety instructions
- Startup and operation of the mixer/amplifiers
- Tips for setting up your Bogen Communications
- Settings and expert assistance
- Contact Bogen Communications service
- Troubleshooting
- Warranty information
- Price: 943 USD
|
We recommend checking out our discussion threads on the Bogen Communications Orator 1 Voice Reinforcement System ORATOR1,
which address similar problems with connecting and setting up Mixer/Amplifiers Bogen Communications.
|
User manual for the Bogen Communications Orator 1 Voice Reinforcement System ORATOR1
The user manual for the Bogen Communications Orator 1 Voice Reinforcement System ORATOR1 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Mixer/Amplifiers.
The Bogen Orator 1 Voice Reinforcement System is a flexible and portable wireless microphone PA system aimed at presentation, speech and classroom applications. The system features the ORB35 compact base unit which features a built-in infrared receiver, 35 watt amplifier and multi-channel mixer.
|
If you own a Bogen Communications mixer/amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Bogen Communications Orator 1 Voice Reinforcement System ORATOR1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Bogen Communications Orator 1 Voice Reinforcement System ORATOR1:
Tuning | Infrared Frequency Modulated | Output Power | Amplifier: 35 Watts | Output Impedance | Speaker: Balanced or unbalanced 8 ohms, 25V, 70V | Channels | Two Independent Channels | Carrier Frequency | 4 operational frequencies between 1.8 -2.7MHz Selectable as two bands: 1.8/2.4 MHz or 2.1/2.7MHz | Range | Up to 40' | Frequency Response | 60Hz -20kHz Aux inputs, 100Hz -10kHz Channel A & B | Signal to Noise Ratio | > 70dB Aux /Page inputs; > 60dB Channel A & B | Distortion | <1% Aux inputs, < 3%Channel A & B | Input Sensitivity | ORB35: AUX: 85mV; Priority Page: 150mV or 25/70V | Input Impedance | ORB35:AUX: >10k ohms; Priority Page:1k ohms (min.) | Controls | Front-Mounted: AUX 1-4 Level, Master Volume, Bass and Treble Rear-Mounted: Channel A & B Level, Page Override Level, 6 bands of EQ, Confirmation Tone Level | Audio Inputs | Front-Mounted: AUX 4 (Stereo combining RCA jacks) Rear-Mounted: AUX 1-AUX 4 (Stereo combining RCA jacks); Page Override (pluggable terminal strip) | Audio Outputs | Front-Mounted: Monitor Out (RCA jack and 1/8" Mini) Rear-Mounted: Booster Out and Subwoofer Out (RCA jacks); Speaker connections (pluggable terminal strip) | Switches | Front-Mounted: Power Rear-Mounted: EQ In/Out, 8-position DIP switch (configuration) | Control Connectors | Rear-Mounted: Sensor input (F-type Connector) Rear-Mounted: C-form relay contact set (pluggable terminal strip) | EQ Section | Bass and Treble controls (± 12 dB at 100 Hz and 10 kHz, respectively); 6-Band Graphic EQ (± 12 dB at 250, 500, 1k, 2k, 4k, and 8kHz) | Indicators | Power; 2 Channel Active (one for each channel), 2 Charging (one for each dock) | Power/Battery Chargers | Two front-mounted with lockable rotating cover | Security | Rotating cover; lock/unlock in both open or closed positions | Power Supply | 120V AC, 1A | Dimensions (WxHxD) | 17.25 x 3.5 x 12.5" (43.81 x 8.89 x 31.75cm) | Weight | 16 lb (7.25kg) | Carrier Frequency | 4 operational frequencies between 1.8 - 2.7MHz | Audio Inputs | Built-in Condenser Microphone; MIC (external): Condenser only, mono 1/8" mini plug, 2V DC through 680 ohms, 1mV sensitivity min. 10 mV max AUX: Stereo or mono 1/8" mini plug, 3k Ω(min.) input, 250mV sensitivity | Controls | On/Off Switch, Input Volume Control, 2 function buttons | Batteries | Li-ion, Rechargeable, Bogen P/N 45-7543-05 0-15 hours (approx.), depending on transmit frequency | Dimensions (WxHxD) | 1.9 x 4 x 1.2" (4.82 x 10.16 x 3.04cm) | Weight | 4 oz (113g) | |
The user manual for the Bogen Communications Orator 1 Voice Reinforcement System ORATOR1 can be downloaded in .pdf
format if it did not come with your new mixer/amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Bogen Communications users keep a unique electronic library
for Bogen Communications mixer/amplifierss,
where you can use our link to download the user manual for the Bogen Communications Orator 1 Voice Reinforcement System ORATOR1.
The user manual lists all of the functions of the Bogen Communications Orator 1 Voice Reinforcement System ORATOR1,
all the basic and advanced features and tells you how to use the mixer/amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Bogen Communications service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Bogen Communications Orator 1 Voice Reinforcement System ORATOR1. User manuals are also
available on the Bogen Communications website under Pro Audio - Installation Sound - Mixer/Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Bogen Communications Orator 1 Voice Reinforcement System ORATOR1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Bogen Communications Orator 1 Voice Reinforcement System ORATOR1
|
|
|
|
|