|
User manual for Bogen Communications ORB35 Orator Receiver/Base for Orator ORB35
- Manufacturer: Bogen Communications
- Basic description and contents of package
- Product classification: A/V Presentation - Assistive Listening - Components & Accessories
- Safety instructions
- Startup and operation of the components & accessories
- Tips for setting up your Bogen Communications
- Settings and expert assistance
- Contact Bogen Communications service
- Troubleshooting
- Warranty information
- Price: 638 USD
|
We recommend checking out our discussion threads on the Bogen Communications ORB35 Orator Receiver/Base for Orator ORB35,
which address similar problems with connecting and setting up Components & Accessories Bogen Communications.
|
User manual for the Bogen Communications ORB35 Orator Receiver/Base for Orator ORB35
The user manual for the Bogen Communications ORB35 Orator Receiver/Base for Orator ORB35 provides
necessary instructions for the proper use of the product A/V Presentation - Assistive Listening - Components & Accessories.
The Bogen Communications ORB35 Receiver/Base for Orator Voice Reinforcement System contains a 2-channel wireless IR receiver and a 35W mixer/amplifier with 4 AUX inputs, and a priority paging input compatible with line-level as well as speaker-level signals. The priority page input mutes all AUX inputs. The front-mounted bass and treble controls and a rear-mounted 6-band graphic EQ provide 8 bands of frequency shaping. Additionally, a boost and subwoofer signal level output complete the audio package.
|
If you own a Bogen Communications components & accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Bogen Communications ORB35 Orator Receiver/Base for Orator ORB35 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Bogen Communications ORB35 Orator Receiver/Base for Orator ORB35:
Communication Method | Infrared frequency modulated | Output Power | Rating: 35 W | Output Impedance | Speaker: Balanced or unbalanced 8 Ω, 25 V, 70 V | Receiving Channels | 2 independent channels | Carrier Frequency | 4 operational frequencies between 1.8 to 2.7 MHz Selectable As 2 Bands: 1.8/2.4 or 2.1/2.7 MHz | Range Of View | Up to 40' (12.2 m) | Audio Frequency Response | 60 Hz to 20 kHz AUX inputs, 100 Hz to 10 kHz Channel A & B | S/N Ratio | > 70 dB AUX/page inputs; > 60 dB Channel A & B | Distortion | < 1% AUX inputs, < 3% Channel A & B | Input Sensitivity | AUX: 85 mV Priority Page: 150 mV or 25/70 V | Input Impedance | AUX: >10 kΩ Priority Page: 1 kΩ (minimum) | Controls | Front-Mounted: AUX 1 to 4 level, master volume, bass, and treble Rear-Mounted: Channel A & B level, page override level, 6 bands of EQ, confirmation tone level | Audio Inputs | Front-Mounted: AUX 4 (stereo combining RCA jacks) Rear-Mounted: AUX 1 to AUX 4 (stereo combining RCA jacks) Page Override (pluggable terminal strip) | Audio Outputs | Front-Mounted: Monitor Out (RCA jack and 1/8" mini) Rear-Mounted: Booster Out and subwoofer out (RCA jacks), speaker connections (pluggable terminal strip) | Switches | Front-Mounted: Power Rear-Mounted: EQ In/Out, 8-position DIP switch (configuration) | Other Connectors | Rear-Mounted: Sensor input (F-type connector) Rear-Mounted: C-form relay contact set (pluggable terminal strip) | EQ Amp | Bass and treble controls (± 12 dB at 100 Hz and 10 kHz, respectively) 6-band graphic EQ (± 12 dB at 250, 500, 1k, 2k, 4k, and 8k Hz) | Indicators | Power: 2 Channel active (one for each channel), 2 charging (one for each dock) | Charger | 2 front-mounted with lockable rotating cover | Lock | Rotating cover; lock/unlock in both open or closed positions | Power Requirements | 120 VAC, 1 A | Safety Certfication | Listed to UL Standard 60065 | Dimensions (W x H x D) | 17.2 x 3.5 x 12.5" (43.7 x 8.9 x 31.7 cm) | Weight | 17.0 lb (7.7 kg) | |
The user manual for the Bogen Communications ORB35 Orator Receiver/Base for Orator ORB35 can be downloaded in .pdf
format if it did not come with your new components & accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Bogen Communications users keep a unique electronic library
for Bogen Communications components & accessoriess,
where you can use our link to download the user manual for the Bogen Communications ORB35 Orator Receiver/Base for Orator ORB35.
The user manual lists all of the functions of the Bogen Communications ORB35 Orator Receiver/Base for Orator ORB35,
all the basic and advanced features and tells you how to use the components & accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Bogen Communications service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Bogen Communications ORB35 Orator Receiver/Base for Orator ORB35. User manuals are also
available on the Bogen Communications website under A/V Presentation - Assistive Listening - Components & Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Bogen Communications ORB35 Orator Receiver/Base for Orator ORB35 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Bogen Communications ORB35 Orator Receiver/Base for Orator ORB35
|
|
|
|
|