|
User manual for Burst Electronics HDLG HD/SD-SDI Color Logo Generator BURST-HDLG
- Manufacturer: Burst Electronics
- Basic description and contents of package
- Product classification: Professional Video - Studio & EFP Equipment - Logo Generators
- Safety instructions
- Startup and operation of the logo generators
- Tips for setting up your Burst Electronics
- Settings and expert assistance
- Contact Burst Electronics service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Burst Electronics HDLG HD/SD-SDI Color Logo Generator BURST-HDLG,
which address similar problems with connecting and setting up Logo Generators Burst Electronics.
|
User manual for the Burst Electronics HDLG HD/SD-SDI Color Logo Generator BURST-HDLG
The user manual for the Burst Electronics HDLG HD/SD-SDI Color Logo Generator BURST-HDLG provides
necessary instructions for the proper use of the product Professional Video - Studio & EFP Equipment - Logo Generators.
The HDLG HD/SD-SDI Color Logo Generator from Burst Electronics is a self-contained in-line HD/SD-SDI logo generator. The HD/SD-SDI program video path is a full 10-bit resolution, while the resolution of the logos are 8-bit RGB (24-bit total) bitmap images. These logos can be switched on/off or faded in/out of the program path using either a Windows based software interface, a real-time clock scheduler, an external GPI input or directly from the front panel. The transparency of the insert and the fade rate are also selectable.
The HDLG includes a Windows based GUI that accommodates the loading and positioning of the image. Optional scheduling capabilities are available which make use of the internal time keeping capabilities of the HDLG on-board processor to run the schedule. The HDLG also accepts a one-pulse-per-second time-keeping pulse from an external source to maintain the timing accuracy of the on-board clock. The scheduler's database can then be stored in the HDLG and accessed by the GUI.
The HDLG generator's GPI input function is fully programmable. It can be used to over-ride the scheduler and display a pre-defined logo. For instance, a logo indicating technical difficulties could be selected by the GPI input, regardless of the schedule. The GPI could also be programmed to cycle through the available logos, or just initiate the cut, fade, in or out. The logos can be made level sensitive or edge-sensitive.
The input and output of the HDLG is a serial digital (SDI) in either standard definition NTSC/PAL 480i/576i or the high-definition HDTV 720p50/60 and 1080i50/60 formats. The HDLG automatically detects the input standard and format without user intervention. The logo generator is intrinsically locked and formatted to the program channel input format. The latency between input and output of the HDLG is about 6 clock cycles, allowing it to be inserted in-line anywhere in the system. Additionally, because this device may be in-line and in a critical path, a failsafe bypass relay is included to route the SDI input directly to the output when power is lost or the unit is off.
|
If you own a Burst Electronics logo generators and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Burst Electronics HDLG HD/SD-SDI Color Logo Generator BURST-HDLG in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Burst Electronics HDLG HD/SD-SDI Color Logo Generator BURST-HDLG:
| Enclosure | Aluminum and steel | | Connectors | 1 x 12 VDC power
1 x USB port
1 x BNC SDI input
1 x BNC SDI loop output
1 x BNC SDI output
1 x 6-pin Phoenix type EXT clock/GPI input | | Controls | 1 x Live feed selection switch
1 x Speed up/down switch
1 x Mix transparency adjustment switch
1 x Horizontal position switch
1 x Vertical position switch
1 x Take switch
1 x Logo select switch
1 x Power on/off switch | | LED Indicators | 4 x Logo bi-color indicator tower
1 x Bug selected logo indicator, red
1 x HD/SD indicator, green/red | | Video Input | Standards: SD/SDI or HD/SDI SMPTE 259M, SMPTE 274M, SMPTE 296M
Level: 800 mV pp
Impedance: 75 Ω
Equalization: Automatic up to 328' (100 m) @ 1.5 GHz using Belden 1694 | | Video Output | Generate Mode 1080i/60, 720p/60 Digital Color Bars
Standards: SMTPE 292M/259M
Level: 800 mV pp
Impedance: 75 Ω | | GPI Input | Bi-directional, optically isolated
One +5 (short-circuit protected) for common | | Sync Input | Impedance: 2 kΩ
Level: TTL | | Signal Path | Signal Path: YUV 4:2:2
Sampling: SD - 27 MHz; HD - 74.25 MHz or 74.25/1.001 MHz
Quantization: 10-bits signal path
Latency: 6 clocks
Output Jitter: 0.2 UI | | Logo Overlay | Format: 24-bit LOGOS
Loading Interface: USB 1.1/2.0 compliant
Max Size: 512 x 512 pixels
Quantization: 8-bit RGB | | Storage | Up to 4 logos | | Interface | USB 2.0 | | Power Supply | 120 VAC, 9 to 15 VDC @ 250 mA | | Operating Temperature | 32 to 104°F (0 to 40°C) | | Storage Temperature | -40 to 185°F (-40 to 85°C) | | Relative Humidity | 5 to 95%, non-condensing | | Dimensions (W x H x D) | 5.6 x 1.5 x 7.0" (4.2 x 3.8 x 17.8 cm) | | Weight | Not Specified by the Manufacturer | | Package Weight | 3.0 lb | | Box Dimensions (LxWxH) | 16.0 x 11.0 x 6.0" | |
The user manual for the Burst Electronics HDLG HD/SD-SDI Color Logo Generator BURST-HDLG can be downloaded in .pdf
format if it did not come with your new logo generators, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Burst Electronics users keep a unique electronic library
for Burst Electronics logo generatorss,
where you can use our link to download the user manual for the Burst Electronics HDLG HD/SD-SDI Color Logo Generator BURST-HDLG.
The user manual lists all of the functions of the Burst Electronics HDLG HD/SD-SDI Color Logo Generator BURST-HDLG,
all the basic and advanced features and tells you how to use the logo generators.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Burst Electronics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Burst Electronics HDLG HD/SD-SDI Color Logo Generator BURST-HDLG. User manuals are also
available on the Burst Electronics website under Professional Video - Studio & EFP Equipment - Logo Generators.
Question and answer discussion forum concerning user instructions and resolving problems with the Burst Electronics HDLG HD/SD-SDI Color Logo Generator BURST-HDLG - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Burst Electronics HDLG HD/SD-SDI Color Logo Generator BURST-HDLG
|
|
|
|
|
