|
User manual for CAD E60 - Studio Microphone E60
- Manufacturer: CAD
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Instrument
- Safety instructions
- Startup and operation of the instrument
- Tips for setting up your CAD
- Settings and expert assistance
- Contact CAD service
- Troubleshooting
- Warranty information
- Price: 199 USD
|
We recommend checking out our discussion threads on the CAD E60 - Studio Microphone E60,
which address similar problems with connecting and setting up Instrument CAD.
|
User manual for the CAD E60 - Studio Microphone E60
The user manual for the CAD E60 - Studio Microphone E60 provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Instrument.
The CAD E60 is versatile, cost effective condenser microphone designed for vocal and instrument capturing in recording applications. The E60 incorporates an op-amp output stage, much like the output stage found in the Equitek series. Unlike the Equitek, the E60 is powered by +48V phantom power and does not require a battery to compensate for the power requirements of the op-amp. The cardioid capsule features a 4-position frequency contour switch with Flat, 40Hz, 80Hz and 120Hz settings. A 10dB Pad switch maximizes gain when capturing audio at close proximity. The E60's sonic performance and frequency response make it a solid, cost-effective solution for home and project studios.
|
If you own a CAD instrument and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the CAD E60 - Studio Microphone E60 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the CAD E60 - Studio Microphone E60:
Transducer | Front address, externally biased condenser | Polar Pattern | Cardioid | Frequency Response | 30Hz - 20kHz | Dynamic Range (Typical) | 125dB | Signal-to-Noise Ratio | 20dB Equivalent SPL, A weighted | Maximum Input Sound Level | 138dB SPL (with pad on) | Power Requirements | 24 - 52 Volts Phantom Power | Output Impedance | Low (300 ohms nominal) | Output Connectors | Gold plated 3-pin XLR type | Pad | 10dB | Low Frequency Roll-Off | 4 - Position: Flat, 40Hz, 80Hz and 120Hz | Dimensions | 4.47 x 1.95" (113.54 x 49.53mm) (Length x Diameter) | Weight | 9.5oz (270 g) | Package Weight | 1.2 lb | Box Dimensions (LxWxH) | 7.0 x 6.5 x 4.0" | |
The user manual for the CAD E60 - Studio Microphone E60 can be downloaded in .pdf
format if it did not come with your new instrument, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other CAD users keep a unique electronic library
for CAD instruments,
where you can use our link to download the user manual for the CAD E60 - Studio Microphone E60.
The user manual lists all of the functions of the CAD E60 - Studio Microphone E60,
all the basic and advanced features and tells you how to use the instrument.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from CAD service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the CAD E60 - Studio Microphone E60. User manuals are also
available on the CAD website under Pro Audio - Live Sound - Instrument.
Question and answer discussion forum concerning user instructions and resolving problems with the CAD E60 - Studio Microphone E60 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the CAD E60 - Studio Microphone E60
|
|
|
|
|