User manual Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1
Operating instructions and pdf manual for use - Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1 User manual, User manual Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1, Cisco, SPA8000, 8-Port, IP, Telephony, Gateway, SPA8000-G1,
User manual for Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
Manufacturer: Cisco
Basic description and contents of package
Product classification: Computers & Solutions - Networking - VoIP Accessories
Safety instructions
Startup and operation of the voip accessories
Tips for setting up your Cisco
Settings and expert assistance
Contact Cisco service
Troubleshooting
Warranty information
Price: 215 USD
We recommend checking out our discussion threads on the Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1,
which address similar problems with connecting and setting up VoIP Accessories Cisco.
User manual for the Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1
The user manual for the Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1 provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - VoIP Accessories.
The Cisco SPA8000 8-Port IP Telephony Gateway is a feature-rich analog telephone adapter providing enhanced communication services via a broadband connection to the Internet. The Cisco SPA8000 features eight RJ-11 FXS ports to connect analog telephones to IP-based data networks and includes a single multiport RJ-21 50-pin connector, offering an alternative connection choice when deploying the telephony gateway in varied environments. The device also has one 10/100BASE-T RJ-45 Ethernet interface to connect to either a router or a multilayer switch.
If you own a Cisco voip accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1:
Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516)
Internet Control Message Protocol (ICMP) (RFC 792)
TCP (RFC 793)
User Datagram Protocol (UDP) (RFC 768)
Real Time Protocol (RTP) (RFC 1889, 1890)
Real Time Control Protocol (RTCP) (RFC 1889)
Differentiated Services (DiffServ) (RFC 2475), type of service (ToS) (RFC 791, 1349)
VLAN tagging (IEEE 802.1p)
Simple Network Time Protocol (SNTP) (RFC 2030)
Upload data rate limiting-static and automatic
Quality of service (QoS)-voice packet prioritization over other packet types
MAC address cloning
Port forwarding
Session Initiation Protocol (SIP) channels support both UDP and TCP transport
VPN pass-through with IP Security encapsulating security payload (IPsec ESP), Point-to-Point Tunneling Protocol (PPTP) and Layer 2 Tunneling Protocol (L2TP)
Voice Gateway
SIP v2 (RFC 3261, 3262, 3263, 3264)
SIP proxy redundancy-dynamic via DNS SRV, A records
Reregistration with primary SIP proxy server
SIP support in Network Address Translation (NAT) networks (including Serial Tunnel [STUN])
Secure (encrypted) calling via prestandard implementation of Secure RTP
Codec name assignment
G.711 (a-law and µ-law)
G.726 (16/24/32/40 kbps)
G.729 A
G.723.1 (6.3 kbps, 5.3 kbps)
Dynamic payload
Adjustable audio frames per packet
Fax tone detection pass-through
Fax pass-though (using G.711)
Dual-tone multifrequency (DTMF): in-band and out-of-band (RFC 2833) (SIP info)
Flexible dial plan support with interdigit timers and IP dialing
Call progress tone generation
Jitter buffer-adaptive
Frame loss concealment
Full-duplex audio
Echo cancellation (G.165/G.168)
Voice activity detection (VAD) with silence suppression
Comfort noise generation (CNG)
QoS (Ethernet port upstream bandwidth control, physical port, MAC address, application)
Attenuation/gain adjustments
Flash hook timer
Message waiting indicator (MWI) tones
Visual message waiting indicator (VMWI) via frequency shift keying (FSK)
Polarity control
Hook flash event signaling
Caller ID generation (name and number)-Bellcore, DTMF, European Telecommunications Standards Institute (ETSI)
Music on hold client
Streaming audio server-up to 10 sessions
System dial-on-demand routing (DDR) synchronous dynamic RAM (SDRAM)-16 MB
System flash ROM-4 MB
Security
Password-protected system reset to factory default Password-protected administrator and user access authority Provisioning/configuration/authentication: HTTPS with factory-installed client certificate HTTP digest-encrypted authentication via MD5 (RFC 1321) Authentication: Extensible Authentication Protocol Transport Layer Security (EAP-TLS), EAP Tunneled Transport Layer Security (EAP-TTLS) and Protected EAP (PEAP) SIP TLS Up to 256-bit Advanced Encryption Standard (AES) encryption
Administration and Maintenance
Web browser administration and configuration via integral web server
Telephone keypad configuration with interactive voice prompts
Automated provisioning and upgrade via HTTPS, HTTP, Trivial File Transfer Protocol (TFTP)
Asynchronous notification of upgrade availability via NOTIFY
Nonintrusive, in-service upgrades
Report generation and event logging
Stats in BYE message
Syslog and debug server records
Per-line and purpose configurable syslog and debug options
The user manual for the Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1 can be downloaded in .pdf
format if it did not come with your new voip accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Cisco users keep a unique electronic library
for Cisco voip accessoriess,
where you can use our link to download the user manual for the Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1.
The user manual lists all of the functions of the Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1,
all the basic and advanced features and tells you how to use the voip accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Cisco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1. User manuals are also
available on the Cisco website under Computers & Solutions - Networking - VoIP Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Cisco SPA8000 8-Port IP Telephony Gateway SPA8000-G1 - no comments have been made yet - be the first to add a comment
Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55 Posted by: jpdaval69 2024-09-10 00:50:11
I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607.
I hope you have it and I'm willing to be charged for it.
Best Regards....