|
User manual for Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800
Overall Rating: 4.0
80% of respondents would recommend this to a friend.
- Manufacturer: Cisco
- Basic description and contents of package
- Product classification: Computers & Solutions - Networking - VoIP Accessories
- Safety instructions
- Startup and operation of the voip accessories
- Tips for setting up your Cisco
- Settings and expert assistance
- Contact Cisco service
- Troubleshooting
- Warranty information
- Price: 410 USD
|
We recommend checking out our discussion threads on the Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800,
which address similar problems with connecting and setting up VoIP Accessories Cisco.
|
User manual for the Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800
The user manual for the Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800 provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - VoIP Accessories.
The Cisco SPA8800 IP Telephony Gateway is an affordable IP telephony gateway solution that is ideal for small business environments that have VoIP service and also require a connection to the public switched telephone network. It can be used with the existing analog telephones and teleconferencing equipment, enabling small business customers to protect and extend their investments. The SPA8800 can be configured to be a FXO gateway for an Asterisk open source PBX, providing a versatile solution when conditions favor an external device.
|
If you own a Cisco voip accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800:
Data Networking | MAC address (IEEE 802.3)
IPv4 (RFC 791)
Address Resolution Protocol (ARP)
DNS A record (RFC 1706), SRV record (RFC 2782)
Dynamic Host Configuration Protocol (DHCP) client (RFC 2131)
DHCP server (RFC 2131)
Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516)
Internet Control Message Protocol (ICMP) (RFC 792)
Transport Control Protocol (TCP) (RFC 793)
User Datagram Protocol (UDP) (RFC 768)
Real Time Protocol (RTP) (RFC 1889, 1890)
Real Time Control Protocol (RTCP) (RFC 1889)
Differentiated Services (DiffServ) (RFC 2475), type of service (ToS) (RFC 791, 1349)
VLAN tagging (IEEE 802.1p)
Simple Network Time Protocol (SNTP) (RFC 2030)
Upload data rate limiting: Static and automatic
Quality of service (QoS): Voice packet prioritization over other packet types
MAC address cloning
Port forwarding
SIP channels support both User Datagram Protocol (UDP) and TCP transport
VPN pass-through with IP Security encapsulating security payload (IPsec ESP), Point-to-Point Tunneling Protocol (PPTP), and Layer 2 Tunneling Protocol (L2TP) | Voice Features | SIP version 2
Dual-tone multifrequency (DTMF) tone detection and generation
Voice Activity Detection (VAD)
Comfort Noise Generation (CNG) compatible
Silence suppression
Call waiting, call waiting caller ID (FXS ports only)
Caller ID with name/ number
Caller ID blocking
Call forwarding: No answer, busy, all
Do not disturb
Call transfer, call return, call back on busy
Fax: G.711 pass-through or real-time fax over IP via T.38 fax relay
(T.38 support is dependent on fax machine and network/transport resilience)
Supports multiple voice codecs: G.711a, G.711u, G.726,G.729A, G.723.1
SIP over TLS
Three-way conference calling with local mixing
Per-call authentication and associated routing
Call blocking with toll restriction
Delayed disconnect
Distinctive ringing: Calling and called number
Off-hook warning tone
Selective/anonymous call rejection
VoIP to PSTN (USA) service call origination and termination
PSTN (USA) to VoIP service call origination and termination
Forward calls to VoIP service: Selective, authenticated, all
Forward calls to PSTN service: Selective, authenticated, all
Automatic PSTN fallback (loss of power or IP service to unit, with quiescence to normal operations): Fixed fallback pairing of FXS ports to FXO ports
Advanced inbound and outbound call routing
Independent configurable dial plans (1 per port)
Force PSTN disconnection | FXO Behavior Features | PSTN answer delay timer
PSTN-to-VoIP call max duration timer
VoIP-to PSTN call max duration timer
PSTN dialing delay timer
VoIP dialog refresh interval timer
PSTN ring time-out timer | International Control Features | FXO port impedance: configurable to 16 settings
Ring frequency: Configurable
SPA to PSTN and PSTN to SPA gain settings
Ring frequency: Maximum setting
Ring validation time setting
Tip/ring voltage adjustment setting
Ring indication delay setting
Operational loop current minimum value
Ring time-out setting
On-hook speed setting
Ringer impedance setting
Line-in-use voltage setting | Security | Password-protected system reset to factory default
Password-protected administrator and user access authority
Provisioning/configuration/authentication: HTTPS with factory-installed client certificate
HTTP digest-encrypted authentication via MD5 (RFC 1321)
Authentication: Extensible Authentication Protocol TLS (EAP-TLS), EAP Tunneled TLS (EAP-TTLS) and Protected EAP (PEAP)
SIP over TLS
Up to 256-bit Advanced Encryption Standard (AES) encryption | Administration and Maintenance | Web browser administration and configuration via integral web server
Telephone keypad configuration with interactive voice prompts
Automated provisioning and upgrade via HTTPS, HTTP, Trivial File Transfer Protocol (TFTP)
Asynchronous notification of upgrade availability via NOTIFY
Nonintrusive, in-service upgrades
Report generation and event logging
Stats in BYE message
Syslog and debug server records
Per-line and purpose configurable syslog and debug options | Physical Interfaces | 4 RJ-11 FXS phone ports for analog circuit telephone device(s) (tip/ring)
4 RJ-11 FXO line ports for telco or PABX or KTS connection(s)
RJ-21 (50-pin telco connector) multiport voice connection
1 WAN 100BASE-T RJ-45 Ethernet port (IEEE 802.3)
1 AUX 100BASE-T RJ-45 Ethernet port (IEEE 802.3) for Maintenance | Power Supply | Switching type (100-240V) automatic DC input voltage: 12V DC at 3.0A max. Power adapter: 100-240V, 50-60 Hz AC input | Subscriber Line Interface Circuit | Ring voltage: 40-90 Vpk configurable
Ring frequency: 20-25 Hz
Ring waveform: Trapezoidal
Maximum ringer load: 5 ringer equivalence numbers (RENs)
On-hook/off-hook characteristics:
On-hook voltage (tip/ring): -46 - -56V
Off-hook current: 18-20 mA
Terminating impedance: 600 ohm resistive or 270 ohm + 750 ohm
150 nF complex impedance
Frequency response 300-3400 Hz
Return loss (600 ohm, 300-3400 Hz) up to 20 dB
Insertion loss (1 Vrms at 1 kHz) 3-4 dB
Total harmonic distortion (THD) (350 mV peak at 300 Hz) up to 3%
Idle channel noise 72 dB (typical)
Longitudinal balance 55 dB (typical)
Off-hook threshold (line seizure) Rdc < 1000 ohm
On-hook threshold (line release) Rdc > 10000 ohm
Rdc DC supervisory range Rdc > 450 ohm | Regulatory Compliance | IEC 60950-1:2005, Second Edition, with all country deviations
AS/NZS 60950-1:2003, First Edition
CAN/CSA 22.2 No. 60950-1-05, Second Edition
UL 60950-1, Second Edition, 2005
EN55024
AS/NRZ 3548:1992 Class A
CFR 47 Part 15 Class A
EN55022 Class A
ICES-003, Issue 2, Class A, April 1997
Industry Canada CS-03
TIA-968-A, Addendum 1, 2, 3, 4, 5
TBR21: January 1998
Australia AS/ACIF S002: 2005
Australia AS/ACIF S003: 2008
New Zealand PTC220: 2008 | Indicator Lights | Power, Ethernet, Voice Status, Phone 1 through 4, Line 1 through 4 | Operating Temperature | 32 to 113°F (0 to 45°C) | Storage Temperature | -13 to 185°F (-20 to 85°C) | Operating Humidity | 10 to 90% non condensing | Storage Humidity | 10 to 90% non condensing | Dimensions (W x H x D) | 6.69 x 1.54 x 8.66" (17.0 x 3.9 x 22.0 cm) | Weight | 2.85 lb (1.30 kg) | Package Weight | 4.2 lb | Box Dimensions (LxWxH) | 12.3 x 11.4 x 3.3" | |
The user manual for the Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800 can be downloaded in .pdf
format if it did not come with your new voip accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Cisco users keep a unique electronic library
for Cisco voip accessoriess,
where you can use our link to download the user manual for the Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800.
The user manual lists all of the functions of the Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800,
all the basic and advanced features and tells you how to use the voip accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Cisco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800. User manuals are also
available on the Cisco website under Computers & Solutions - Networking - VoIP Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800
Post new comment to Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800
Subject: Cisco SPA8800 | Date: 25.03.2018 10:43:47 | Author: Mohammed Ehsan | How to do Call blocking with toll restriction in Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800, Also how to change operator | Reply |
Post new comment/question/response regarding the Cisco SPA8800 IP Telephony Gateway with 4 FXS & 4 SPA8800
|
|
|
|
|