|
User manual for Crest Audio Pro-LITE 7.5 Professional Power Amplifier 3602200
- Manufacturer: Crest Audio
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Power Amplifiers
- Safety instructions
- Startup and operation of the power amplifiers
- Tips for setting up your Crest Audio
- Settings and expert assistance
- Contact Crest Audio service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Crest Audio Pro-LITE 7.5 Professional Power Amplifier 3602200,
which address similar problems with connecting and setting up Power Amplifiers Crest Audio.
|
User manual for the Crest Audio Pro-LITE 7.5 Professional Power Amplifier 3602200
The user manual for the Crest Audio Pro-LITE 7.5 Professional Power Amplifier 3602200 provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The 2RU, 7500W Pro-LITE 7.5 Professional Power Amplifier from Crest Audio is designed with a resonant switch-mode power supply and high-speed class D topology. The automatic clip limiting (ACL) circuit is designed to ensure trouble-free operation into loads as low as 2 Ω.
The front panel of the Pro-LITE 7.5 features two attenuators for lowering the output signal from 0 to -80 dB for each channel, while the 5 LED indicators offer feedback for both channels of the amplifiers operations including active, DC, temperature, signal, and ACL.
The rear panel provides two combo XLR/1/4" inputs and two 1/4" thru outputs for connecting to additional amplifiers. Speaker output connections include one 2-pin and one 4-pin twist-lock connector, which accommodates two 2-conductor or one 4-conductor speaker cables. The crossover select switch offers three settings: Full Range, Sub, and High Cut. Sub removes frequencies above 100 Hz, while high-cut removes frequencies below 100 Hz. The amplifier provides three temperature dependent variable-speed fans, while protection circuits guard against thermal overload, direct current, incorrect loads, and under & over voltages. The Pro-LITE 7.5 ships with an IEC power cable.
|
If you own a Crest Audio power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Crest Audio Pro-LITE 7.5 Professional Power Amplifier 3602200 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Crest Audio Pro-LITE 7.5 Professional Power Amplifier 3602200:
Power Rating | 2 channels x 2 Ω: 4800 W 20 ms repetitive burst / 3790 W 1% THD both channels driven @ 1 kHz 2 channels x 4 Ω: 2810 W 20 ms repetitive burst / 2450 W 1% THD / 2030 W 0.15% THD, both channels driven @ 1 kHz 2 channels x 8 Ω: 1550 W 20 ms repetitive burst / 1425 W 1% THD / 1200 W 0.15% THD, both channels driven @ 1 kHz | Damping Factor | > 200:1 @ 20 Hz to 1 kHz @ 8 Ω | Phase Response | +15 to -85 degrees from 20 Hz to 20 kHz | Input Sensitivity | 2.25 V ± 3% for 1 kHz 4 Ω rated power 2.2 V ± 3% for 1 kHz 2 Ω rated power | Input Impedance | 20 kΩ, balanced 10 kΩ, unbalanced | Minimum Load Impedance | 2 Ω | Maximum RMS Voltage Swing | 124 V | Voltage Gain | x 40, +32 dB | Frequency Response | 20 Hz to 25 kHz; +0 dB, -3 dB | THD | 20 Hz to 20 kHz 2ch x 2 ohms: <0.5% @ 3390 W 20 Hz to 4 kHz, decreasing to 3100 W @ 20 kHz, both channels driven 20 Hz to 20 kHz 2ch x 4 ohms: <0.15% @ 1850 W 20 Hz to 20 kHz, both channels driven 20 Hz to 20 kHz 2ch x 8 ohms: <0.15% @ 1170 W 20 Hz to 20 kHz, both channels driven | Input CMRR | > -75 dB @ 1 kHz | Crossover | 100 Hz switchable 2nd order high pass and 3rd low pass per channel | Crosstalk | > -60 dB @ 1 kHz @ 1000 W @ 8 Ω | Hum and Noise | > -100 dB, "A" weighted referenced to rated power @ 4 Ω | Slew Rate | > 12 V/µs | Power Requirements | Current Draw @ 1/8: 2210 VA (1440 W) @ 2 Ω 1550 VA (950 W) @ 4 Ω 985 VA (560 W) @ 8 Ω Current Draw @ 1/3: 4260 VA (3150 W) @ 2 Ω 3120 VA (2160 W) @ 4 Ω 1890 VA (1200 W) @ 8 Ω | Connectors | Rear Panel: 1 x 3-pin IEC, AC power input 1 x Combo 1/4" XLR, channel A input 1 x Combo 1/4" XLR, channel B input 1 x Dual 1/4" phone jack, through/out 1 x 2-pin twist-lock connector 1 x 4-pin twist-lock connector | Controls | Front Panel: 1 x Channel A attenuation knob 1 x Channel B attenuation knob 1 x AC Power On/Off switch Rear Panel: Crossover select switch for HPF, Normal and LPF | Indicator LEDs | Front Panel: 2 x Active 2 x DC 2 x Temperature 2 x Channel Signal 2 x ACL (Automatic Clip Limiting) | Idle Consumption | 250 VA, 120 W | Cooling | 3 temperature dependent variable speed fans | Protection | Thermal, DC, subsonic, incorrect loads, under, and over-voltage | Construction | Aluminum: 0.062" (1.575 mm) | Dimensions (H x W x D) | 3.5 x 19.0 x 17.0" (8.9 x 48.3 x 43.2 cm) Handle: 0.6" (1.5 cm) | Weight | 18.4 lb (8.3 kg) | Package Weight | 19.6 lb | Box Dimensions (LxWxH) | 21.575 x 20.63 x 7.008" | |
The user manual for the Crest Audio Pro-LITE 7.5 Professional Power Amplifier 3602200 can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Crest Audio users keep a unique electronic library
for Crest Audio power amplifierss,
where you can use our link to download the user manual for the Crest Audio Pro-LITE 7.5 Professional Power Amplifier 3602200.
The user manual lists all of the functions of the Crest Audio Pro-LITE 7.5 Professional Power Amplifier 3602200,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Crest Audio service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Crest Audio Pro-LITE 7.5 Professional Power Amplifier 3602200. User manuals are also
available on the Crest Audio website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Crest Audio Pro-LITE 7.5 Professional Power Amplifier 3602200 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Crest Audio Pro-LITE 7.5 Professional Power Amplifier 3602200
|
|
|
|
|