| Power | Dual Mode
2 Ω: 150 W
4 Ω: 300 W
8 Ω: 300 W
16 Ω: 150 W
70 Vrms: 300 W
100 Vrms: 300 W
Bridge Mono Mode
4 Ω: 300 W
8 Ω: 600 W
16 Ω: 600 W
140 Vrms: 600 W
200 Vrms: 600 W |
| Voltage Gain | 4/8 Ω Operation: 34 dB
70 V Operation: 34 dB
100 V Operation: 34 dB |
| Input Sensitivity | 8 Ω: 1 V
70 V: 1.4 V
100 V: 2 V |
| Frequency Response | ±0.25 dB @ 8 Ω, 20 Hz to 20 kHz |
| Signal to Noise Ratio | >108 dB @ 8 Ω, 20 Hz to 20 kHz (reference-rated power) |
| Total Harmonic Distortion | <0.35% @ full rated power, from 20 Hz to 20 kHz |
| Intermodulation Distortion | ≤0.35% (60 Hz and 7 kHz at 4:1, from -30 dB to full-rated power) |
| Damping Factor | >900 @ 20 Hz to 100 Hz |
| Crosstalk | >80 dB @ 20 Hz to 100 Hz (below-rated power) |
| Common Mode Rejection | >70 dB @ 20 Hz to 100 Hz |
| DC Output Offset | With Inputs Shorted: ±10 mV |
| Input Impedance | Nominally Balanced: 10 kΩ
Nominally Unbalanced: 5 kΩ |
| Maximum Input Level | Before Compression: +20 dBu
Before Clipping: +26 dBu |
| Required AC Mains | 100 to 240 V, 60/50 Hz (±10%) |
| Load Impedance | Stereo/Dual Mode: 2 to 16 Ω; 70 and 100 Vrms
Bridge Mono: 4 to 16 Ω; 140 and 200 Vrms |
| Cooling | Continuously variable speed forced air, front-to-back airflow |
| Fan Noise | Maximum: 45 re dB SPL @ 3.28' (1.00 m) |
| Dimensions (W x H x D) | 19.00 x 3.50 x 14.25" (49.02 x 8.89 x 36.19 cm) |
| Weight | 20.10 lb (9.12 kg) |
Question and answer discussion forum concerning user instructions and resolving problems with the Crown Audio DCI4300 DriveCore Install Series Analog DCI4300 - no comments have been made yet - be the first to add a comment