User manual Crown Audio XTi 1002 Power Amplifier XTI 1002
Operating instructions and pdf manual for use - Crown Audio XTi 1002 Power Amplifier XTI 1002 User manual, User manual Crown Audio XTi 1002 Power Amplifier XTI 1002, Crown, Audio, XTi, 1002, Power, Amplifier, XTI, 1002, Video
User manual for Crown Audio XTi 1002 Power Amplifier XTI 1002
Manufacturer: Crown Audio
Basic description and contents of package
Product classification: Pro Audio - Installation Sound - Standard Amplifiers
Safety instructions
Startup and operation of the standard amplifiers
Tips for setting up your Crown Audio
Settings and expert assistance
Contact Crown Audio service
Troubleshooting
Warranty information
Price: 499 USD
We recommend checking out our discussion threads on the Crown Audio XTi 1002 Power Amplifier XTI 1002,
which address similar problems with connecting and setting up Standard Amplifiers Crown Audio.
User manual for the Crown Audio XTi 1002 Power Amplifier XTI 1002
The user manual for the Crown Audio XTi 1002 Power Amplifier XTI 1002 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Standard Amplifiers.
The Crown XTi 1002 Power Amplifier delivers up to 275W per channel at 8 ohms and is an ideal solution for sound reinforcement, nightclub installation, bands, theaters, DJ applications and much more. The XTi 1002 offers highly accurate sound reproduction with very low distortion, perfect for music or voice playback. It has a switch-mode universal power supply so it can be used anywhere. It handles a wide range of speaker impedances and outputs for a high degree of system compatibility.
If you own a Crown Audio standard amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Crown Audio XTi 1002 Power Amplifier XTI 1002 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
XTi1002/2002/4002: 100dB (A weighted) XTi6002: 103dB (A weighted)
Total Harmonic Distortion (THD)
< 0.5%
Connections
Input Connectors: XLR, one per channel Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors). HiQnet USB Connector: Type B, connects to HiQnet network.
Controls Front Panel
Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifierSel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout LCD Screen: Backlit liquid crystal display that shows preset and processing status
Indicators
Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs). -10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditionsPower Indicator: Blue LED illuminates when the amplifier has been turned on and has power
Cooling
Proportional speed fan with front-to-rear airflow.
Power Consumption
6.8A; no more than 38W at idle
Power Requirements
100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
Dimensions
19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm)
Weight
18.5 lbs (8.4kg)
Specialties
DSP Includes EQ, Crossover Filters, Delay, and Subharmonic Synthesizer Protection for Short Circuits, Overloads, and Overheating
The user manual for the Crown Audio XTi 1002 Power Amplifier XTI 1002 can be downloaded in .pdf
format if it did not come with your new standard amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Crown Audio users keep a unique electronic library
for Crown Audio standard amplifierss,
where you can use our link to download the user manual for the Crown Audio XTi 1002 Power Amplifier XTI 1002.
The user manual lists all of the functions of the Crown Audio XTi 1002 Power Amplifier XTI 1002,
all the basic and advanced features and tells you how to use the standard amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Crown Audio service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Crown Audio XTi 1002 Power Amplifier XTI 1002. User manuals are also
available on the Crown Audio website under Pro Audio - Installation Sound - Standard Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Crown Audio XTi 1002 Power Amplifier XTI 1002 - no comments have been made yet - be the first to add a comment
Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55 Posted by: jpdaval69 2024-09-10 00:50:11
I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607.
I hope you have it and I'm willing to be charged for it.
Best Regards....