|
User manual for DJI Spreading Wings S1000 Professional Octocopter CP.SB.000129R
- Manufacturer: DJI
- Basic description and contents of package
- Product classification: Camcorders - Aerial Imaging & Drones - Aerial Imaging Platforms & Drones
- Safety instructions
- Startup and operation of the aerial imaging platforms & drones
- Tips for setting up your DJI
- Settings and expert assistance
- Contact DJI service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the DJI Spreading Wings S1000 Professional Octocopter CP.SB.000129R,
which address similar problems with connecting and setting up Aerial Imaging Platforms & Drones DJI.
|
User manual for the DJI Spreading Wings S1000 Professional Octocopter CP.SB.000129R
The user manual for the DJI Spreading Wings S1000 Professional Octocopter CP.SB.000129R provides
necessary instructions for the proper use of the product Camcorders - Aerial Imaging & Drones - Aerial Imaging Platforms & Drones.
Featuring a removable upper center board for easier installation of flight electronics as well as a redesigned power distribution system, the Spreading Wings S1000+ Professional Octocopter from DJI continues the legacy of the original S1000. The S1000+ is a collapsible, eight-propeller RC helicopter designed to carry a DSLR or similar-sized camera. With a 24-pound maximum takeoff weight, it is intended to serve as a camera platform, allowing professional videographers and photographers to add dynamic aerial shots to their productions. It is designed to work with either the A2 or WooKong-M flight control systems, which are available separately.
For stabilizing and moving a camera in flight, the S1000 is compatible with any of the Zenmuse Z15 series gimbals. The airframe features a dampened gimbal mounting bracket with a low mounting position. Additionally, the landing gear can be raised, allowing an unobstructed 360° of visibility.
The S1000 is designed to power 6S lithium-polymer batteries. It will support capacities between 10,000 and 20,000mAh, and requires a discharge rate of at least 15C. With a 15,000mAh battery and a take-off weight of 21 pounds, it is estimated to fly approximately 15 minutes.
Note: Assembly is required and a flight control system is not included.
|
If you own a DJI aerial imaging platforms & drones and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the DJI Spreading Wings S1000 Professional Octocopter CP.SB.000129R in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the DJI Spreading Wings S1000 Professional Octocopter CP.SB.000129R:
Takeoff Weight | 13.2 lb / 6 kg to 24.2 lb / 11 kg | Stator Size | 1.6 x 0.6" / 41 x 14 mm | Motor Velocity Constant | KV: 400 rpm/V | Maximum Power | 500 W | Weight | With Cooling Fan: 5.6 oz / 158 g | Working Current | 40 A | Working Voltage | 6S LiPo | Signal Frequency | 30 to 450 Hz | Drive PWM Frequency | 8 kHz | Weight | 1.2 oz / 35 g | Size | 15 x 5" / 38.1 x 12.7 cm | Weight | 0.5 oz / 13 g | Diagonal Wheelbase | 41.1" / 1045 mm | Frame Arm Length | 15.2" / 386 mm | Center Frame Diameter | 13.3" / 337 mm | Center Frame Weight | With Landing Gear Mounting Base, Servos: 3.3 lb / 1.5 kg | Landing Gear Size | 18.1 x 20.1 x 12" / 460 x 511 x 305 mm | Compatibility | A2 or WooKong-M | Gain Value Settings | For A2 Flight Controller Basic: Roll 120%, Pitch 120%, Yaw 120% Attitude: Roll 170%, Pitch 170%, Vertical 120%
For WooKong-M Flight Controller Basic: Roll 130%, Pitch 130%, Yaw 120% Attitude: Roll 180%, Pitch 180%, Vertical 120% | Power Requirements | Lithium-Polymer (LiPo): | Power Consumption | Maximum: 4000 W Hovering: 1500 W at 20.9 lb / 9.5 kg takeoff weight | Operating Temperature | 14 to 104°F / -10 to 40°C | Weight | 9.7 lb / 4.4 kg | Package Weight | 16.65 lb | Box Dimensions (LxWxH) | 20.1 x 17.8 x 11.6" | |
The user manual for the DJI Spreading Wings S1000 Professional Octocopter CP.SB.000129R can be downloaded in .pdf
format if it did not come with your new aerial imaging platforms & drones, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other DJI users keep a unique electronic library
for DJI aerial imaging platforms & droness,
where you can use our link to download the user manual for the DJI Spreading Wings S1000 Professional Octocopter CP.SB.000129R.
The user manual lists all of the functions of the DJI Spreading Wings S1000 Professional Octocopter CP.SB.000129R,
all the basic and advanced features and tells you how to use the aerial imaging platforms & drones.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from DJI service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the DJI Spreading Wings S1000 Professional Octocopter CP.SB.000129R. User manuals are also
available on the DJI website under Camcorders - Aerial Imaging & Drones - Aerial Imaging Platforms & Drones.
Question and answer discussion forum concerning user instructions and resolving problems with the DJI Spreading Wings S1000 Professional Octocopter CP.SB.000129R - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the DJI Spreading Wings S1000 Professional Octocopter CP.SB.000129R
|
|
|
|
|