User manual for Earthworks FW430 FlexWand Series 30 kHz High FW430TPBMP
- Manufacturer: Earthworks
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Small Diaphragm Condenser
- Safety instructions
- Startup and operation of the small diaphragm condenser
- Tips for setting up your Earthworks
- Settings and expert assistance
- Contact Earthworks service
- Troubleshooting
- Warranty information
Click to enlarge image
|
We recommend checking out our discussion threads on the Earthworks FW430 FlexWand Series 30 kHz High FW430TPBMP,
which address similar problems with connecting and setting up Small Diaphragm Condenser Earthworks.
|
User manual for the Earthworks FW430 FlexWand Series 30 kHz High FW430TPBMP
The user manual for the Earthworks FW430 FlexWand Series 30 kHz High FW430TPBMP provides
necessary instructions for the proper use of the product Pro Audio - Recording - Small Diaphragm Condenser.
The FlexWand Series 30 kHz High Definition Cardioid Microphone from Earthworks incorporates a highly sensitive 30 kHz FlexWand microphone, built into a height adjustable gooseneck stand. The entire microphone system is sleek, low-profile, easy to set up and reproduces audio with incredible detail. The integrated stand is height adjustable. Easily adjust from 4'7" to 10" (1.39m to 25cm) with no exposed cables to create tension or noise.
|
If you own a Earthworks small diaphragm condenser and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Earthworks FW430 FlexWand Series 30 kHz High FW430TPBMP in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Earthworks FW430 FlexWand Series 30 kHz High FW430TPBMP:
| Polar Pattern | Cardioid | | Frequency Range | 30 Hz to 30 kHz | | Equivalent Noise Level | 22 dB A-Weighted | | Maximum SPL | 145 dB SPL | | Impedance | 100 ohms | | Load Impedance | 600 ohms | | Sensitivity | 10 mV/PA | | Power Requirements | 48 V | | Output Connectors | 3-Pin XLR | | Operating Current Consumption | 10 mA | |
The user manual for the Earthworks FW430 FlexWand Series 30 kHz High FW430TPBMP can be downloaded in .pdf
format if it did not come with your new small diaphragm condenser, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Earthworks users keep a unique electronic library
for Earthworks small diaphragm condensers,
where you can use our link to download the user manual for the Earthworks FW430 FlexWand Series 30 kHz High FW430TPBMP.
The user manual lists all of the functions of the Earthworks FW430 FlexWand Series 30 kHz High FW430TPBMP,
all the basic and advanced features and tells you how to use the small diaphragm condenser.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Earthworks service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Earthworks FW430 FlexWand Series 30 kHz High FW430TPBMP. User manuals are also
available on the Earthworks website under Pro Audio - Recording - Small Diaphragm Condenser.
Question and answer discussion forum concerning user instructions and resolving problems with the Earthworks FW430 FlexWand Series 30 kHz High FW430TPBMP - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Earthworks FW430 FlexWand Series 30 kHz High FW430TPBMP
|
|
