PDF-MANUALS.com | User manual here!
User manual

User manual EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300

Operating instructions and pdf manual for use - EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300 User manual, User manual EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300, EnGenius, EWS2910P-KIT300, Neutron, Series, WLAN, EW

User manual for EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300

EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300
  • Manufacturer: EnGenius
  • Basic description and contents of package
  • Product classification: Computers & Solutions - Networking - Network Switches, Bridges & Hubs
  • Safety instructions
  • Startup and operation of the network switches, bridges & hubs
  • Tips for setting up your EnGenius
  • Settings and expert assistance
  • Contact EnGenius service
  • Troubleshooting
  • Warranty information
  • Price: 730 USD
We recommend checking out our discussion threads on the EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300, which address similar problems with connecting and setting up Network Switches, Bridges & Hubs EnGenius.


User manual for the EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300

The user manual for the EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300 provides necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Switches, Bridges & Hubs.

With two access points and a single PoE switch, the EWS2910P-KIT300 Neutron Series WLAN Starter Kit from EnGenius comes with the necessary components to either expand an existing network or create an entirely new one. The included PoE switch (EWS2910P) features 802.3af PoE networking protocol compliance to virtually eliminate the need for separate power sources when attaching compatible network components. The EWS2910P draws from a power budget of 61.6 watts giving each port a total power output of up to 15 watts. On this switch you will find 8 Gigabit Ethernet ports and 2 SFP fiber ports along with dedicated LED indicators for Power, Fault, PoE Max, LAN Mode, PoE Mode, and more.

Included with this EnGenius switch are two EnGenius access points (EWS300AP). Each of these access points operates on the 2.4 GHz frequency and they both come compatible with the 802.3af PoE networking standard making it easy to install them virtually anywhere as they do not require separate power adapters. Once installed these Wi-Fi AP's provide wireless network access using the 802.11b/g/n networking standards with data transfer rates of up to 300 Mbps. The signal is emitted using two internal high gain antennas which are designed to penetrate multiple floors using up to 29 dBm transmit power.
If you own a EnGenius network switches, bridges & hubs and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300 in the following formats:
  • *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300:
Specifications
Switch
Standards IEEE 802.3/802.3u/802.3ab
IEEE 802.3af
Switching Capacity: 20 Gbps
Forwarding Mode: Store and Forward
Physical Interfaces LED Indicators
Mode selector & reset
PoE RJ45 Ethernet port
Dual Speed SFP slots
Network Ports 8 x 10/100/1000 Mbps ports
2 x 100/100 Mbps SFP ports
LED Indicators Device:
Power LED
Fault LED
PoE Max LED
LAN Mode LED
PoE Mode LED
Copper Ports:
LAN/PoE Mode LED
Link/Act LED
SFP Ports:
Speed
Link/Act LED
Power Source 48 VDC / 1.75 A or 54 VDC / 1.66 A power adapter
PoE Compatibility 8 x Ports support IEEE 802.3af
8 x Ports output up to 15 Watts each
Total PoE Power Budget: 61.6 Watts
Memory Capacity SDRAM: 256 MB
Flash Memory: 32 MB
Temperature & Humidity Operating Temperature: 32 to 104°F / 0 to 50°C
Storage Temperature: -40 to 158°F / -40 to 70°C
Humidity: 5 to 95% (non-condensing)
Certifications CE, FCC
Dimensions 9.44 x 4.13 x 1.06" / 240 x 105 x 27 mm
Weight 1.36 lb / 620 g
Access Point
Standards IEEE 802.11b/g/n on 2.4 GHz
IEEE 802.3af Power-over-Ethernet
Radio I: 11b/g/n: 2.412-2.472 GHz
Antennas 2 x 5 dBi 2.4 GHz internal high gain antennas
Physical Interfaces 1 x 10/100/1000 Gigabit Ethernet port
1 x DC power connector
1 x Reset button
Physical Security Kensington security slot
LED Indicators 1 x Power
1 x WLAN (wireless connection)
1 x LAN
Power Source DC Input: 12 VDC / 1 A
PoE: Compatible with 802.3af
Mounting Ceiling or wall mount
Memory Capacity Memory: 128 MB
Flash Memory: 16 MB
Wireless & Radio Specifications Single band
Operation Mode Access point
Transmit Power Up to 29 dBm on 2.4 GHz
Max transmit power is limited by regulatory power
Radio Chains/Spatial Streams 2x2: 2
Supported Data Rates (Mbps) 2.4 GHz: Max 300
802.11b: 1, 2, 5.5, 11
802.11g: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15)
Supported Radio Technologies 802.11b: Direct-Sequence Spread-Spectrum (DSSS)
802.11g/n: Orthogonal frequency-division Multiplexing (OFDM)
Channelization 802.11n with 20/40 MHz channel width
802.11b/g with 20 MHz channel width
Supported Modulation 802.11b: BPSK, QPSK, CCK
802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM
Multiple BSSID Supports up to 8 SSIDs
SSID-to-VLAN Tagging Supports 802.1q SSID-to-VLAN tagging
VLAN Pass through
Wireless Client List
Independent VLAN settings can be enabled or disabled
Any packet without a VLAN tag will be inserted into a PVID (Ethernet Port VID)
Client Traffic Status
Spanning Tree Supports 802.1d Spanning Tree Protocol
QoS IEEE 802.11e/WMM
SNMP v1, v2c, v3
MIB I/II, Private MIB
Deployment Standalone (Individually Managed)
Managed by Neutron Series EWS Switch
Configuration Web Interface (HTTP)
SNMP v1/v2c/v3 with MIB I/II and private MIB
CLI (Telnet)
Firmware Upgrade Web interface or CLI (FTP/HTTP)
Backup & Restore Revert to factory default settings
Security WEP (64/128/152-bit)
WPA/WPA2 (TKIP/AES) Enterprise/PSK
Hidden SSID
MAC address filtering (up to 50 Fields)
L2 Isolation
Client Isolation
802.1X Authenticator (MD5/TLS/TTLS/PEAP)
Guest Network
Temperature & Humidity Operating Temperature: 32 to 104°F / 0 to 40°C
Storage Temperature: -4 to 140°F / -20 to 60°C
Operating Humidity: 90% or less (non-condensing)
Storage Humidity: 90% or less (non-condensing)
Certifications FCC/IC/CE
Dimensions 5.07 x 5.07 x 1.73" / 129.0 x 129.0 x 43.9 mm
Weight 0.45 lb / 202 g
The user manual for the EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300 can be downloaded in .pdf format if it did not come with your new network switches, bridges & hubs, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other EnGenius users keep a unique electronic library for EnGenius network switches, bridges & hubss, where you can use our link to download the user manual for the EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300.

The user manual lists all of the functions of the EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300, all the basic and advanced features and tells you how to use the network switches, bridges & hubs. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from EnGenius service.

If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300. User manuals are also available on the EnGenius website under Computers & Solutions - Networking - Network Switches, Bridges & Hubs.


Discussion Question and answer discussion forum concerning user instructions and resolving problems with the EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300 - no comments have been made yet - be the first to add a comment

Post new comment/question/response regarding the EnGenius EWS2910P-KIT300 Neutron Series WLAN EWS2910P-KIT300

Fields marked with * must be filled out.
Your name *:
E-mail :
Subject *:
Message text *:
Enter the code *:
(spam block)		 "manual"
If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

 

Can't find what you're looking for? Try Google Search!

Current discussions
Most recently discussed products:

Sigma manual - Sigma 70-300mm f/4-5.6 APO DG Macro Lens for Nikon AF-D 5A8306
Posted by: Ash
2024-04-17 16:17:29

Do you have a manual for the sigma 70-300 lens ass suggested on this page...
Please, send me the user manual - Ibanez M510E A-Style Acoustic/Electric Mandolin M510BS
Posted by: Jaroslav Bodnar
2024-04-15 15:18:12

Please, send me the user manual for Ibanez M510E-BS Mandolin in PDF. Thak You!...
Vortex 8x42 HD Talon binocular Manual - Vortex Talon HD 8x42 Roof Prism Binocular TLN-4208-HD
Posted by: Pierre Gagnon
2024-04-12 23:06:37

Would like your PDF manual. Thanks for this convenience. Fantastic binocular....
QX2442usb - Behringer Xenyx QX2442USB Premium 24-Input 4/2-Bus QX2442USB
Posted by: manyeob
2024-04-11 09:35:47

Need a service manual Thanks...
Manual PDF - Global Truss ST-180 Extra Heavy-Duty Crank Stand ST-180
Posted by: Ryan Edwards
2024-04-11 01:11:58

Hi, I'm seeking the User manual for the Global Truss ST-180 Extra Heavy-Duty Crank Stand ST-180...

Uploaded instruction manuals
Upload a link to an instruction manual for a depicted product here:

Link format "http://www.link2manual.com/manual.pdf"

Enter the code: "manual"




PDF-MANUALS.com - Community administered database of instructions for use and PDF User manual
sitemap.txt alx