User manual Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R
Operating instructions and pdf manual for use - Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R User manual, User manual Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R, Focusrite, RedNet, HD32R, 32-Channel, Dante, Netwo
User manual for Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R
Manufacturer: Focusrite
Basic description and contents of package
Product classification: Pro Audio - Computer Audio - Accessories
Safety instructions
Startup and operation of the accessories
Tips for setting up your Focusrite
Settings and expert assistance
Contact Focusrite service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R,
which address similar problems with connecting and setting up Accessories Focusrite.
User manual for the Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R
The user manual for the Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - Accessories.
The RedNet HD32R 32-Channel Dante Networks Pro Tools|HD Bridge from Focusrite is a 1U, 19-inch rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system. This includes its very flexible network topology and high-quality audio interfaces. The Pro Tools system is connected to the HD32R via standard Mini DigiLink ports.
The HD32R utilizes dual Ethernet ports with the provided locking etherCON connectors, and several operating modes, including daisy-chaining and redundancy, which are confirmed by front-panel indicators. Two separate power supplies with fault detection capability are included, with separate power input sockets (with retaining clips) on the rear of the unit. Additionally, its power status is indicated both remotely and on the front panel.
The HD32R features a rugged, roadworthy exterior and high internal build quality. In addition, it offers a compact 1U rack-mount form factor for a full 32 channels of I/O.
Focusrite's RedNet was the first to offer IP networked audio interfaces for recording studios, education, live sound, and broadcast workflows, combining suitable audio interfaces with the time-tested reliability of the Dante Ethernet-based audio networking system from Audinate. Dante has been in use in the live sound industry for years in exacting applications without missing a single sample.
Dante networking offers a powerful combination of features that make it particularly useful for any Pro Tools|HD production environment. Focusrite's well-respected DC-coupled mic preamplifiers and exacting digital conversion helps to ensure a very high audio quality I/O, while Dante allows it to interoperate fully with Pro Tools|HD and Pro Tools|HDX.
Ethernet-based audio networking technology makes the need for complex, bulky and expensive analogue multi-way cables a thing of the past. Connected to Pro Tools|HD with RedNet HD32R, audio interfaces can be conveniently located anywhere an Ethernet port is available.
The HD32R acts as a 64-channel (32 in/32 out) digital break in/out box, operating in the same way as a standard interface, and supporting a wide range of Pro Tools|HDX and HD cards. Supported Pro Tools systems include Pro Tools|HDX, Pro Tools|HD Native, Pro Tools|HD Native Thunderbolt, and Pro Tools|HD TDM. Up to six HD32R modules can be used with a Pro Tools|HDX system and three with Pro Tools|HD, allowing the maximum channel count for either. Simply connect theHD32R to Pro Tools|HD with standard Mini DigiLink connectors. Furthermore, the 32-channel bridge allows the use of the low-latency performance of Pro Tools|HD cards in place of a RedNet PCIe card, bringing the full benefits of Dante audio-over IP networking and the RedNet product range to a Pro Tools|HD system. The entire range of Dante-compatible products including the RedNet analogue and digital interfaces can then be used with a Pro Tools|HD system, all connected via Ethernet cable.
Finally, from complex multi-room systems to single installations, Dante and RedNet offer the ability to create a sophisticated and comprehensive high-quality audio production environment around a standard Ethernet network, with HD32R providing the bridge to any Pro Tools|HD system. Assign any available Dante source or destination via HD32R and it appears in Pro Tools exactly as it would with any other Pro Tools-compatible interface, maintaining traditional Pro Tools workflows.
If you own a Focusrite accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R:
Specifications
Connectors (Rear Panel)
2 x etherCON locking Ethernet connectors ( compatible with standard RJ45 connectors) 2 x BNC Word Clock In and Out (with switchable 75 ohm input termination) 2 x BNC Loop Sync I/O (75 ohm port) 2 x Mini DigiLink connectors to/from Pro Tools|HD system (Primary and Expansion) 2 x IEC power inputs (with retaining clips)
Controls
Power on/off
Digital Performance
Clock Sources: Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / +0.1 / +4.167%) at 24 bit Ext. Word Clock Range: nominal sample rate ±7.5%
Indicators
Primary PSU (A): Green LED – Illuminates when an AC input is applied and all DC outputs are present. Primary PSU (B): Green LED – Illuminates when an AC input is applied and all DC outputs are present. Primary Network: Green LED – Indicates that a network connection is present on primary port when in redundant mode. When in Switched mode, a valid network connection at either Primary or Secondary network port will cause this LED to illuminate. Secondary Network: Green LED – Indicates that a network connection is present on secondary port when in redundant mode. Not used in switched mode. Network Locked: Green LED – When unit is network slave, shows valid network lock. When network master, shows lock to indicated clock source. Flashing indicates external clock is selected but not connected. Sample Rate: Orange LED – For each: 44.1 kHz, 48 kHz, x2, x4. Pull Up/Down: Orange LED – Indicates unit is set to operate on a Dante pull up/down domain. Signal Indicators: 16 x Green LEDs, 8 input/8 output indicators. Illuminate @ -126 dBFS. Clock Source: Orange LED for each – Internal, Word Clock, Loop Sync and DAW Master.
Network Modes
Redundant: Allows unit to connect two independent networks Switched: Connects both ports to integrated network switch, allowing daisy-chaining of device
Supported Systems
Pro Tools|HD PCIe Pro Tools|HDX Pro Tools|HD Native PCIe Pro Tools|HD Native Thunderbolt
System Requirements
Requires Pro Tools|HD 8.0 and up
PSU
2 x internal; IEC inputs, 100 to 240 VAC, 50/60 Hz Apparent Power: 30 VA
The user manual for the Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R can be downloaded in .pdf
format if it did not come with your new accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Focusrite users keep a unique electronic library
for Focusrite accessoriess,
where you can use our link to download the user manual for the Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R.
The user manual lists all of the functions of the Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R,
all the basic and advanced features and tells you how to use the accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Focusrite service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R. User manuals are also
available on the Focusrite website under Pro Audio - Computer Audio - Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Focusrite RedNet HD32R 32-Channel Dante Networks REDNET HD32R - no comments have been made yet - be the first to add a comment
Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55 Posted by: jpdaval69 2024-09-10 00:50:11
I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607.
I hope you have it and I'm willing to be charged for it.
Best Regards....True Dock not recognizing hard drives - Kingwin True Dock Super-Speed USB 3.0 to TD-2535U3 Posted by: bf1955 2024-08-22 15:34:26
True Dock is not recognizing HDD, the HDD light does not come on, even though the power light does come one....