|
User manual for Heritage Audio 2264E Compressor and Limiter Module HA2264E
- Manufacturer: Heritage Audio
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Dynamics Processors
- Safety instructions
- Startup and operation of the dynamics processors
- Tips for setting up your Heritage Audio
- Settings and expert assistance
- Contact Heritage Audio service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Heritage Audio 2264E Compressor and Limiter Module HA2264E,
which address similar problems with connecting and setting up Dynamics Processors Heritage Audio.
|
User manual for the Heritage Audio 2264E Compressor and Limiter Module HA2264E
The user manual for the Heritage Audio 2264E Compressor and Limiter Module HA2264E provides
necessary instructions for the proper use of the product Pro Audio - Recording - Dynamics Processors.
The Heritage Audio 2264E Compressor and Limiter Module is a 10 series compatible 1RU rack module designed for studio signal processing. The unit can be used in 10 series racks, 8-channel frames, and 80 series consoles. The device's circuitry is based on the original 2254 Compressor/Limiter audio path with a classic Class A amplifier stage and the control circuit of the 2264a.
The top of the device features an analog gain reduction meter that shows the amount of compression or limiting up to 20 dB. The unit features flip switches for engaging the limiter and compression functions, as well as recovery switches that set the time constant for the compression and limiting process. The limiter has selectable recovery times of 50 ms, 100 ms, 200 ms, 800 ms, Auto 1 (100 ms on peaks, 2 seconds on program material), and Auto 2 (50 ms on peaks, and 5 seconds on program material). The compressor recovery time can be set to 100 ms, 400 ms, 800 ms, 1500 ms, Auto 1 (100 ms on peaks, 2 seconds on program material), and Auto 2 (50 ms on peaks, 5 seconds on program material).
For precise adjustments, the unit features stepped controls for the limit level, compression threshold, compression ratio, and gain makeup. The limit level can be set between +15 dBm down to +4 dBm in 0.5 dB steps. The compression threshold can be set from +10 dBm down to -20 dBm in 2 dB steps, and the compression ratio can be set at values of 1.5:1, 2:1, 3:1, 4:1, and 6:1. The gain makeup of the unit has a range of 0 to 20 dB in 2 dB steps. A bypass switch allows you to place the module in and out of the signal path. Using the IND switch, the module can be linked to Buss A, Buss B, or operated independently.
|
If you own a Heritage Audio dynamics processors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Heritage Audio 2264E Compressor and Limiter Module HA2264E in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Heritage Audio 2264E Compressor and Limiter Module HA2264E:
| Limit Switches | Recovery time: 50 ms, 100 ms, 200 ms, 800 ms, Auto 1 (100ms on peaks, 2 seconds on program material), and Auto 2 (50 ms on peaks, 5 seconds on program material)
Level: from +15 dBm down to +4 dBm in 0.5 dB steps | | Compressor | Recovery time: 100 ms, 400 ms, 800 ms, 1500 ms, Auto1 (100 ms on peaks, 2 seconds on program material) and Auto 2 (50 ms on peaks, 5 seconds program material)
Threshold: from +10 dBm down to -20 dBm in 2 dB steps
Ratio: 1.5:1, 2:1, 3:1, 4:1, 6:1
Gain makeup: from 0 to 20 dB in 2 dB steps | | Input Impedance | 10 kΩ bridging, transformer balanced and floating | | Output Impedance | Less than 75 Ω, transformer balanced and floating to drive a load of 600 Ω | | Maximum Output | Greater than +26 dBm into 600 Ω, greater than +32 dBu into 10 kΩ | | THD | Less than 0.025% at 1,000 Hz
Less than 0.05% at 100 Hz | | Frequency Response | 20 Hz (+0.3 dB) to 20,000 Hz (-0.2 dB) | | Maximum Gain | 0 to 20 dB in 2 dB steps | | Noise | Less than -90 dBm when gain makeup is set to 0 dB | | Power Consumption | 112 mA at 24 VDC | | Dimensions (W x H x D) | 1.77 x 12.2 x 8.74" (4.5 x 31 x 22.2 cm) | | Weight | 5.1 lb (2.3 kg) | |
The user manual for the Heritage Audio 2264E Compressor and Limiter Module HA2264E can be downloaded in .pdf
format if it did not come with your new dynamics processors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Heritage Audio users keep a unique electronic library
for Heritage Audio dynamics processorss,
where you can use our link to download the user manual for the Heritage Audio 2264E Compressor and Limiter Module HA2264E.
The user manual lists all of the functions of the Heritage Audio 2264E Compressor and Limiter Module HA2264E,
all the basic and advanced features and tells you how to use the dynamics processors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Heritage Audio service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Heritage Audio 2264E Compressor and Limiter Module HA2264E. User manuals are also
available on the Heritage Audio website under Pro Audio - Recording - Dynamics Processors.
Question and answer discussion forum concerning user instructions and resolving problems with the Heritage Audio 2264E Compressor and Limiter Module HA2264E - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Heritage Audio 2264E Compressor and Limiter Module HA2264E
|
|
|
|
|
