|
User manual for HP 1810 24 Port Layer 2 Switch J9801A
- Manufacturer: HP
- Basic description and contents of package
- Product classification: Computers & Solutions - Networking - Network Switches, Bridges & Hubs
- Safety instructions
- Startup and operation of the network switches, bridges & hubs
- Tips for setting up your HP
- Settings and expert assistance
- Contact HP service
- Troubleshooting
- Warranty information
- Price: 148 USD
|
We recommend checking out our discussion threads on the HP 1810 24 Port Layer 2 Switch J9801A,
which address similar problems with connecting and setting up Network Switches, Bridges & Hubs HP.
|
User manual for the HP 1810 24 Port Layer 2 Switch J9801A
The user manual for the HP 1810 24 Port Layer 2 Switch J9801A provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
Manage your network directly from the Web with the 1810 24 Port Layer 2 Switch from HP. This layer 2 switch comes equipped with 22 autosensing Fast Ethernet ports, 2 autosensing Gigabit Ethernet ports, and 2 100/1000 small form-factor ports. With 128 MB of RAM and 8 MB of Flash memory inside, the switch is capable of handling a high traffic load making it a valuable addition to nearly any small business IT infrastructure. You can even mount this switch into an existing rack as it comes compatible with 1U rackmount configurations.
|
If you own a HP network switches, bridges & hubs and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the HP 1810 24 Port Layer 2 Switch J9801A in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the HP 1810 24 Port Layer 2 Switch J9801A:
| I/O Ports | 22 x RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full
2 x RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 x SFP 100/1000 Mbps ports
Supports a maximum of 22 autosensing 10/100 ports plus 2 autosensing 10/100/1000 ports plus 2 SFP ports | | Memory and Processor | 128 MB RAM, 8 MB flash; packet buffer size: 512 KB | | Enclosure | Mounts in an EIA-standard 19 in. telco rack (hardware included); horizontal surface, wall, and under-table mounting | | Performance | 100 Mb Latency/1000 Mb Latency: < 3.4 µs (64-byte packets)
Throughput: Up to 9.2 Mpps
Switching Capacity: 12.4 Gbps
MAC Address Table Size: 8000 entries | | Environment | Operating Temperature: 32 to 104°F / 0 to 40°C
Operating Relative Humidity: 15 to 95% @ 104°F / 40°C
Nonoperating/Storage Temperature: -40 to 158°F / -40 to 70°C
Nonoperating/Storage Relative Humidity: 15 to 95% @ 140°F / 60°C
Altitude: Up to 10,000' / 3 km
Acoustic Power: 0 dB no fan | | Electrical Characteristics | Frequency: 50/60 Hz
AC Voltage: 100-127 / 200-240 VAC
Current: 0.4/0.3 A
Maximum Power Rating: 22 W
Please note, maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | | Safety | UL 60950-1; IEC 60950; EN 60950 | | Emissions | EN 55022 Class A; CISPR 22 Class A; VCCI V-3; FCC (CFR 47, Part 15) Subpart B Class A; VCCI V-4 | | Immunity | ESD: IEC 61000-4-2
Radiated: IEC 61000-4-3
EFT/Burst: IEC 61000-4-4
Surge: IEC 61000-4-5
Conducted: IEC 61000-4-6
Power Frequency Magnetic Field: IEC 61000-4-8
Voltage Dips and Interruptions: IEC 61000-4-11
Harmonics: EN 61000-3-2
Flicker: EN 61000-3-3 | | Management | Web browser | | Denial of Service Protection | CPU DoS Protection | | Protocols Supported | IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.3ad Link Aggregation Control
Protocol (LACP)
IEEE 802.3x Flow Control
RFC 1534 DHCP/BOOTP Interoperation
RFC 2030 Simple Network Time Protocol
(SNTP) v4 | | Network Management | IEEE 802.1AB Link Layer Discovery
Protocol (LLDP) | | Dimensions | 12.99 x 6.81 x 1.73" / 32.99 x 17.30 x 4.39 cm
(1U height) | | Weight | 2.2 lb / 1.0 kg | | Package Weight | 5.45 lb | | Box Dimensions (LxWxH) | 17.3 x 10.4 x 3.6" | |
The user manual for the HP 1810 24 Port Layer 2 Switch J9801A can be downloaded in .pdf
format if it did not come with your new network switches, bridges & hubs, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other HP users keep a unique electronic library
for HP network switches, bridges & hubss,
where you can use our link to download the user manual for the HP 1810 24 Port Layer 2 Switch J9801A.
The user manual lists all of the functions of the HP 1810 24 Port Layer 2 Switch J9801A,
all the basic and advanced features and tells you how to use the network switches, bridges & hubs.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from HP service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the HP 1810 24 Port Layer 2 Switch J9801A. User manuals are also
available on the HP website under Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
Question and answer discussion forum concerning user instructions and resolving problems with the HP 1810 24 Port Layer 2 Switch J9801A - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the HP 1810 24 Port Layer 2 Switch J9801A
|
|
|
|
|
