Startup and operation of the dvi/vga kvm extenders
Tips for setting up your Intelix
Settings and expert assistance
Contact Intelix service
Troubleshooting
Warranty information
Price: 700 USD
We recommend checking out our discussion threads on the Intelix ASW-WP Two-Gang Auto-Switching Wall Plate ASW-WP,
which address similar problems with connecting and setting up DVI/VGA KVM Extenders Intelix.
User manual for the Intelix ASW-WP Two-Gang Auto-Switching Wall Plate ASW-WP
The user manual for the Intelix ASW-WP Two-Gang Auto-Switching Wall Plate ASW-WP provides
necessary instructions for the proper use of the product Computers & Solutions - Computer Peripherals - DVI/VGA KVM Extenders.
The ASW-WP Two-Gang Auto-Switching Wall Plate from Intelix provides hands-free switching of analog and digital source inputs. It also features selectable HDCP compliance, ensuring non-compliant HDMI laptops and codecs can connect to the digital network. It is designed to be the primary PC interface for classrooms, boardrooms, and conference centers that continuously juggle the need for integrating VGA and HDMI laptops and tablets. The ASW-WP auto-switching wallplate merges the analog and digital worlds by providing HDMI and VGA/stereo audio source connectivity, and a fully digital HDBaseT extender output.
Suitable for table, floor, and wallbox installations, the ASW-WP automatically detects live video signal streams, switches between signals, embeds analog video and audio into a digital stream, and extends the signals up to 200' to a remote destination. It features a VGA+ audio to HDMI conversion and an HDMI input. Plus, embedded RS232 control provides remote display control and low power ECO modes.
The ASP-WP plate uses HDBaseT technology to extend the digital output up to 196.8' (60m) away using the standard CAT5e cable. The ASW-WP is compatible with Intelix HDBaseT matrix switchers and extenders. When used with an Intelix DIGI-HD60C-R twisted pair receiver, the ASW-WP receives power remotely via the connected twisted pair cable.
The unit is primarily designed to be used with the DIGI-HDC60-R receiver. The unit features multiple EDID modes to eliminate user confusion and incompatible video formats. It can be powered from the rear panel Power over HDBaseT (PoH). The built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. The ASP-WP can be programmed to control the connected display. The display manufacturer’s RS232 commands can be entered into the ASP-WP plate using the Display Control software. This allows display power and input to be automatically controlled based on video activity, eliminating the need for third party control system in many installations.
If you own a Intelix dvi/vga kvm extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Intelix ASW-WP Two-Gang Auto-Switching Wall Plate ASW-WP in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Intelix ASW-WP Two-Gang Auto-Switching Wall Plate ASW-WP:
SMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p VESA: Resolutions up to 4k Color Depth: 24, 30, 36, 48-bit
VGA Resolution
SMPTE: 480p at 60 Hz, 576p at 60 Hz, 720p at 60 Hz , 1080p at 60 Hz VESA: 640 x 480, 800 x 600, 1024 x 768, 1280 x 768, 1280 x 800, 1280 x 1024, 1600 x 1200, 1680 x 1050, 1920 x 1200 (RB) - at 60 Hz 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024 at 75 Hz 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024 at 85 Hz 1024 x 768 at 70 Hz 640 x 480, 800 x 600 at 72 Hz
Video Compatibility
Deep color 36/30/24-bit at 1080p (HDMI Input) at 196.8' (60.0 m) Deep color 48-bit at 1080p, 3D (HDMI Input) at 131.2' (40.0 m)
Compliance With HDMI Standard
HDMI and HDCP (Selectable)
Embedded Audio
HDMI: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio PC: Analog stereo line-level (Converted to 2-channel 24-bit PCM 48 kHz)
The user manual for the Intelix ASW-WP Two-Gang Auto-Switching Wall Plate ASW-WP can be downloaded in .pdf
format if it did not come with your new dvi/vga kvm extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Intelix users keep a unique electronic library
for Intelix dvi/vga kvm extenderss,
where you can use our link to download the user manual for the Intelix ASW-WP Two-Gang Auto-Switching Wall Plate ASW-WP.
The user manual lists all of the functions of the Intelix ASW-WP Two-Gang Auto-Switching Wall Plate ASW-WP,
all the basic and advanced features and tells you how to use the dvi/vga kvm extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Intelix service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Intelix ASW-WP Two-Gang Auto-Switching Wall Plate ASW-WP. User manuals are also
available on the Intelix website under Computers & Solutions - Computer Peripherals - DVI/VGA KVM Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the Intelix ASW-WP Two-Gang Auto-Switching Wall Plate ASW-WP - no comments have been made yet - be the first to add a comment