User manual Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52
Operating instructions and pdf manual for use - Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52 User manual, User manual Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52, Intelix, DIGI-P52, 5, x, 2, Presentation, Switcher, DIGI-P52,
User manual for Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52
Manufacturer: Intelix
Basic description and contents of package
Product classification: Professional Video - Signal Processing & Distribution - Routers & Switchers
Safety instructions
Startup and operation of the routers & switchers
Tips for setting up your Intelix
Settings and expert assistance
Contact Intelix service
Troubleshooting
Warranty information
Price: 699 USD
We recommend checking out our discussion threads on the Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52,
which address similar problems with connecting and setting up Routers & Switchers Intelix.
User manual for the Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52
The user manual for the Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Routers & Switchers.
The Intelix DIGI-P52 allows the integration of multiple analog and digital devices into a high-definition environment. Mounting options include wall-mount, shelf-mount, or under-table.
The DIGI-P52 allows selection of five different sources and will simultaneously scale the selected video to HDMI and HDBaseT outputs. The unit features three HDCP compliant HDMI inputs and two VGA inputs with discrete analog audio inputs for each input connection. The VGA inputs can be configured to support YPbPr (component video) and CV (composite video) video formats. There are seven fixed output resolutions to pick from, and several aspect ratio modes, which will ensure your content is displayed properly. The HDBaseT output will allow you to extend audio, video, and control signals up to 197 ft away, including PoE for the remote extender.
The DIGI-P52 offers unique audio options designed to simplify your installation. All audio inputs are embedded into the HDMI and HDBaseT streams, so you can use your display speakers for audio. Additionally, the line level output can be used for reinforcement. A balanced input is provided (line or microphone level) which is mixed with the source audio to provide voice lift capabilities, while the volumes of the mic and source can be individually controlled.
The DIGI-P52 can be controlled in many different ways. When the VGA inputs are defined as PC signal inputs, the DIGI-P52 can be configured to auto-switch to any source once connected to the switcher. The front panel offers source selection, output resolution, and volume control. Third party control systems can utilize RS-232 rear panel, RS-232 extended (with a compatible HDBaseT receiver), and rear panel IR control. CEC enabled source devices can be controlled from a CEC enabled display.
If you own a Intelix routers & switchers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52:
Specifications
Inputs
3x HDMI 1.3 type A inputs (DVI-D compatible) 2x HD15-F VGA inputs 5x 3-Pole/3.5 mm Euroblock analog audio inputs 1x 3-Pole/3.5 mm Euroblock mic input 1x 3.5 mm jack TRS IR input
Outputs
1x HDMI 1.3 type A output (DVI-D compatible) 1x 3-Pole/3.5 mm Euroblock output 1x 8P8C-F HDBaseT output 5x 3.5 mm jack TRS IR outputs
-48 dB nominal (mic input), +4 dBu nominal (line input)
Mic Input Impedance
600 ohm (mic input), >10 k ohm (line input)
Mic Phantom Power
48 VDC @ 350 mA
ADC Format
24-bit, 48 kHz, 2-ch LPCM
Line Level Output Impedance
50 ohm
Frequency Response
20 Hz - 20 kHz
Stereo Channel Separation
>80 dB @ 1 kHz
Common Mode Rejection
>90 dB @ 20 Hz - 20 kHz
Control
Front panel push button control Rear Panel Control: RS-232 via 3-Pole/3.5 mm Euroblock, RS-232 via HDBaseT output (8P8C-F), and IR via 3.5 mm TRS
RS-232 Baud Rate
9600 baud
HDBaseT Signal Characteristics
Maximum Distance: 197 ft (60 m) Cable Requirements: solid core shielded CAT5e/6 or greater with TIA/EIA-568B crimp pattern Bandwidth: 10.2 Gbps Gain: 0 - 10 dB at 100 MHz Signal to Noise Ratio (SNR): > 70 dB at 100 MHz over 328 ft (100 m) Return Loss: < -30 dB at 5 KHz Total Harmonic Distortion (THD): < 0.005% at 1 KHz Min-Max Signal Level: < 0.3 V - 1.45 Vp-p Differential Phase Error: ±10° at 135 MHz over 328 ft (100 m)
The user manual for the Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52 can be downloaded in .pdf
format if it did not come with your new routers & switchers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Intelix users keep a unique electronic library
for Intelix routers & switcherss,
where you can use our link to download the user manual for the Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52.
The user manual lists all of the functions of the Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52,
all the basic and advanced features and tells you how to use the routers & switchers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Intelix service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52. User manuals are also
available on the Intelix website under Professional Video - Signal Processing & Distribution - Routers & Switchers.
Question and answer discussion forum concerning user instructions and resolving problems with the Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52 - no comments have been made yet - be the first to add a comment
Hello,I replaced the rv radio, which controls back,and turn signal cameras. How can I wire it to have the backup camera on all the time as a rear view mirror function, except when blinkers are on. Thanks! ...Wiring/configure 501n-3 for rear view switch - Rear View Safety RVS-501N 3-Channel Multiplexer RVS-501N Posted by: Ron Diller 2025-05-06 23:25:03
Hello,I replaced the rv radio, which controls back,and turn signal cameras. How can I wire it to have the backup camera on all the time as a rear view mirror function, except when blinkers are on. Thanks! ...sony alpha 7II - Sony Alpha a7 II Mirrorless Digital Camera with 28-70mm Lens Posted by: Clabue 2025-05-06 13:13:48
Alpha 7 II - Black + Sony FE 28-70mm f/3.5-5.6 OSS f/3.5-5.6
Where can I find a manual. It didn't come with the camera I just purchased online. Thank you....FBA-Pioneer BDR-XU03 - Pioneer BDR-XU03 USB 3.0 BD/DVD/CD Burner BDR-XU03 Posted by: Mark Visel 2025-05-05 20:51:42
Sorry, but I am having one hell of a time finding this manual. Bought thru Amazon and am getting no where with finding manual. Can someone help....SRD-92B setting - Fujinon SRD92B Zoom Rate Demand SRD-92B Posted by: Matthew Allen 2025-05-04 14:10:30
How can we make the speed adjustment control slower...
Question and answer discussion forum concerning user instructions and resolving problems with the Intelix DIGI-P52 5 x 2 Presentation Switcher DIGI-P52 - no comments have been made yet - be the first to add a comment