|
User manual for Leader LV5330-OP01 Histogram and User Gamma Display LV5330-OP01
- Manufacturer: Leader
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Waveform Monitor & Scope Software
- Safety instructions
- Startup and operation of the waveform monitor & scope software
- Tips for setting up your Leader
- Settings and expert assistance
- Contact Leader service
- Troubleshooting
- Warranty information
- Price: 993 USD
|
We recommend checking out our discussion threads on the Leader LV5330-OP01 Histogram and User Gamma Display LV5330-OP01,
which address similar problems with connecting and setting up Waveform Monitor & Scope Software Leader.
|
User manual for the Leader LV5330-OP01 Histogram and User Gamma Display LV5330-OP01
The user manual for the Leader LV5330-OP01 Histogram and User Gamma Display LV5330-OP01 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Waveform Monitor & Scope Software.
The Leader LV5330-OP01 Histogram and User Gamma Display is a software option for LV5330 Multi-SDI Monitor that helps production professionals have a real-life view of the scene by displaying the video feed on the histogram. You can also display the user-defined gamma on the LV5330 picture display by converting it to ITU-R BT709 gamma. The software sets up the histogram for either Y-only display or for Y, R, G, B display.
|
If you own a Leader waveform monitor & scope software and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Leader LV5330-OP01 Histogram and User Gamma Display LV5330-OP01 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Leader LV5330-OP01 Histogram and User Gamma Display LV5330-OP01:
Video Formats | Single Link System Video (Y,CB,CR / 4:2:2 Color System - 10 Bit Quantization)
Scanning
1080i: 60/59.94/50 - SMPTE 274M 1080p: 30/29.97/25/24/23.98 - SMPTE 292M 1080PsF: 30/29.97/25/24/23.98 - SMPTE RP 211 / SMPTE 292M 720p: 60/59.94/50 - SMPTE 296M 720p: 30/29.97/25/24/23.98 - SMPTE 292M 525i: 59.94 - SMPTE 259M 625i: 50 - SMPTE 259M
Dual Link System System Video (GBR / 4:4:4 Color System - 10 Bit Quantization)
Scanning
1080i: 60/59.94/50 - SMPTE 372M (1920 x 1080) 1080p: 30/29.97/25/24/23.9 - SMPTE 372M (1920 x 1080) 1080PsF: 30/29.97/25/24/23.98 - SMPTE 372M (1920 x 1080)
Other Standards
Ancillary Data Standard: SMPTE 291M Embedded Audio Standard: SMPTE 299M (HD-SDI), SMPTE 272M (SD-SDI)
Format Setting
Format Setting: Auto or manual setting from the supported formats Sampling Frequency: - 74.25 MHz (HDTV), 74.25/1.001 MHz (HDTV) - 13.5 MHz (SDTV) External Synchronization: Auto setting from supported formats | Input/Output Connectors | SDI Input
Input Connector: 2 BNC connectors (switching between A and B)
External Reference Input
Input Signal: Tri-level sync or NTSC/PAL black burst Input Connector: 1 pair of BNC connectors (15 kΩ passive loop-through)
SDI Output
Output Connector: 1 BNC connector (reclocks and transmits the selected SDI input signal)
Headphone Output
Output Signal: Extracts and outputs the embedded audio signal Sampling Frequency: Supports 48 kHz (must be synchronized to the video signal) Output Connector: 1 stereo miniature jack, 32 Ω (16 to 600 Ω)
USB Memory
Function: Stores screen captures, error logs, preset data, and data dumps; also used for Firmware update
Remote Control
Function: Recalls presets, transmits errors, controls the tally indicator Connector: D-sub 15-pin female
Ethernet
Function: Enables remote control from an external computer and data transmission Type: 10BASE-T/100BASE-TX auto switching, one RJ-45 jack
Viewfinder Input
Function: Monitors composite video signals, picture only Input Signal: NTSC/PAL VBS signal Input Connector: 1 BNC connector | Display | Picture Display
HDTV Display: Displays by sampling pixels SDTV Display: Displays by interpolating pixels Display: Color or black and white selectable Marker Display: Center marker, aspect marker, safe title marker, safe action marker Color Temperature: 3200 K, 6500 K, 9300 K or THROUGH
Cinelite Display
f-STOP: Measures relative brightness in f-stops Measurement points: Three points specified using the cursor Reference: Uses an object with an 18% reflectance as reference %DISPLAY: Displays luminance percentage (LEVEL%), RGB percentage (RGB%), and RGB numeric values Measurement points: Three points specified using the cursor Measurement areas: 1x1, 3x3, 9x9
GAMMA
0.45: Reference gamma USER 1-3: User-defined gamma USER A-E: Gamma downloaded from USB memory On Picture Level Indicator: Switches the screen to black and white and displays the set luminance level in green
Cinezone Display
Screen: Maps colors based on luminance levels. Linear or step selectable UPPER: Can be set from -6.3% to 109.4%. Displays white when the level is above the set level LOWER: Can be set from -7.3% to 108.4%. Displays Black when the level is below the set level
Display Form
Display Size: 6.5" color XGA. Effective area 1024 x 768 dots 1 Screen Display: Picture display, Cinelite display, Cinezone display, waveform display, vectorscope display, status display, viewfinder display
2 Screen Display: Picture and waveform displays, waveform and vectorscope displays, waveform and picture displays, waveform and audio level displays, audio numeric and bar displays
4 Screen Display: Audio level display or status display selectable in addition to waveform display, vectorscope display, and picture display | Waveform Display | Waveform Display / Waveform Operation
Display Modes: Overlay and parade Timing Display: Displays by calculating Y-CB and Y-CR / Uses bowtie signals (authorized by Tektronix, Inc.) EAV-SAV period: Show or hide selectable GBR Conversion: Converts Y, CB, CR signals into G, B, R and displays the result Pseudo-Composite Display: Digitally converts component signals into composite signals and displays the result Vertical Axis: - Gain: x1, x5, or variable selectable - Variable Gain: x0.2 to x2.0 at the x1 setting, x1.0 to x10.0 at the x5 setting Amplitude Accuracy: ≤ ±0.5% Horizontal Axis: - Line Magnification: x1, x10, x20, ACTIVE, or BLANK - Field Magnification: x1, x20, or x40 selectable Cursor Measurement: - Amplitude Measurement: %, mV, R%, 3FF or 1023 - Time Measurement: Measures in usec or msec Frequency Display: Displays the frequency by assuming the interval between the cursors to be one period
Vectorscope Display
Gain: x1, x5, IQ-MAG, or variable selectable Variable Gain: x0.2 to x2.0 Amplitude Accuracy: ≤ ±0.5% IQ Axis: Show or hide selectable Display Colors: 7 colors to choose from Pseudo-Composite Display: Digitally converts component signals into composite signals and displays the result
5 Bar Display
Bar Display: Displays the peak levels of Y, R, G, B, and composite
Phase Difference Display
Display: Displays the phase difference between an SDI signal and the external sync signal both numerically and graphically | Embedded Audio Display | Display Channels: 8-channel simultaneous display Meter: 60 dB peak level or 90 dB peak level Group Selection: Select any two groups from groups 1, 2, 3, and 4 Channel Mapping: Mapping to L, R, SL(S), SR, C, LFE, RL, RR | Viewfinder | Display Size: Full-screen display | Status Display | Data Dump Display: Dumps data by serial data sequence or by channel Event log: Stores up to 1,000 events Data output: To USB memory or over an Ethernet network | Error Detection | CRC Error, EDH Error, Gamut Error, Composite Gamut Error, BCH Errors | Screen Capture Methods | Screen Capture: Captures the displayed screen Waveform Comparison: Superimposes the input signal over an image from memory Data Output: Screen captures can be saved as bitmap files to USB memory or to a PC over the Ethernet Data Input: Data Saved to USB memory can be loaded and displayed on the LV 5330 | Presets | Presets: 30 | LCD Display | Other Display Features: LCD: 6.5: color LCD Backlight brightness: High or low selectable Screen Display: Format, color system, date, time Panel LED Illumination: Illuminates all keys | Environmental | Operating Temperature: 32 ~ 104°F (0 ~ 40°C) Operating Humidity Range: ≤ 85% RH (no condensation) Operating Environment: Indoors, or outdoors with no rain Overvoltage Category: 1 Pollution Degree: 2 | Power Requirements | 12 VDC (10 to 18 V), 18 W max. | Dimensions (WxHxD) | (excluding projections) 8.5 x 5 x 2.5" (215 x 128 x 63mm) | Weight | 2.9 lbs (1.4kg) | |
The user manual for the Leader LV5330-OP01 Histogram and User Gamma Display LV5330-OP01 can be downloaded in .pdf
format if it did not come with your new waveform monitor & scope software, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Leader users keep a unique electronic library
for Leader waveform monitor & scope softwares,
where you can use our link to download the user manual for the Leader LV5330-OP01 Histogram and User Gamma Display LV5330-OP01.
The user manual lists all of the functions of the Leader LV5330-OP01 Histogram and User Gamma Display LV5330-OP01,
all the basic and advanced features and tells you how to use the waveform monitor & scope software.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Leader service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Leader LV5330-OP01 Histogram and User Gamma Display LV5330-OP01. User manuals are also
available on the Leader website under Professional Video - Signal Processing & Distribution - Waveform Monitor & Scope Software.
Question and answer discussion forum concerning user instructions and resolving problems with the Leader LV5330-OP01 Histogram and User Gamma Display LV5330-OP01 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Leader LV5330-OP01 Histogram and User Gamma Display LV5330-OP01
|
|
|
|
|