|
User manual for Manley Labs Mono Mic Preamp 40MPB
- Manufacturer: Manley Labs
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Microphone Preamps
- Safety instructions
- Startup and operation of the microphone preamps
- Tips for setting up your Manley Labs
- Settings and expert assistance
- Contact Manley Labs service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Manley Labs Mono Mic Preamp 40MPB,
which address similar problems with connecting and setting up Microphone Preamps Manley Labs.
|
User manual for the Manley Labs Mono Mic Preamp 40MPB
The user manual for the Manley Labs Mono Mic Preamp 40MPB provides
necessary instructions for the proper use of the product Pro Audio - Recording - Microphone Preamps.
The Mono Mic Preamp from Manley Labs is a single-channel all-tube microphone preamplifier with enough gain to operate most ribbon microphones and any dynamic or condenser microphone. Each unit is hand-wired with silver solder and professional-grade components, including hand-picked tubes and custom-wound nickel transformers. The gain switch features variable negative feedback which allows for changing the speed, placement and tonal balance of the signal. As a result, the Mono Pre is capable of a broad range of tones from mellow and smooth to fast and punchy.
The Mono Mic Pre features 48V phantom power, a phase reverse switch and a noiseless conductive plastic input attenuator, which controls the signal pre-tube. This allows the unit a headroom of up to + 32dB without clipping, resulting in less distortion of the upper harmonics.
In addition to the single XLR input, the Mono Mic Pre has a front-panel 1/4" direct input jack for processing any audio signal through the all-tube line stage and nickel transformers, including signals from guitars, keyboards, and drum machines. The transformer on the balanced output offers classic vintage coloration, while the metal film capacitors of the unbalanced output sound clean and pure. The internal power supply features custom double-shielded power transformers and large reservoir capacitors for high level noise rejection and quiet operation. Handmade in the USA, the unit is housed in a 1U steel chassis with a CNC-machined 1/4" faceplate that is also inlaid with laser-engraved inserts. The Mono Mic Pre ships with an IEC power cable.
|
If you own a Manley Labs microphone preamps and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Manley Labs Mono Mic Preamp 40MPB in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Manley Labs Mono Mic Preamp 40MPB:
Number of Channels | 1 | Inputs | 1 x XLR Microphone (Back) 1 x 1/4" Direct (Front) | Outputs | 1 x XLR (Balanced) 1 x 1/4" (Unbalanced) | Vacuum Tubes | 1 x 12AX7EH, 1 x 6414 | Frequency Response | 10 Hz - 60 kHz | THD | 0.05% @ 1 kHz, +4 dBv out | Signal to Noise Ratio | 80 dB or better typical (depending on settings and tubes) | EIN | -125 dB | Maximum Output | +32 dBv (70 volts RMS) +15 dBm into 600 Ω | Maximum Input | 450 mV with maximum gain settings | Gain | 40 to 60 dB maximum gain (depending on the setting of the GAIN SWITCH) | Input Impedance | 2400 Ω, transformer coupled Optimized for mics with 100 to 600 Ω output impedances 300 kΩ 1/4" direct input | Output Impedance | 50 Ω from 20 Hz to 20 kHz Transformer coupled balanced output MULTI CAP coupled unbalanced output | Power / Consumption | 120 VAC 60 Hz 18 W | Dimensions (W x H x D) | 19 x 1.75 x 10" (483 x 44 x 254 mm) | Weight | 8.4 lb / 3.8 kg | |
The user manual for the Manley Labs Mono Mic Preamp 40MPB can be downloaded in .pdf
format if it did not come with your new microphone preamps, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Manley Labs users keep a unique electronic library
for Manley Labs microphone preampss,
where you can use our link to download the user manual for the Manley Labs Mono Mic Preamp 40MPB.
The user manual lists all of the functions of the Manley Labs Mono Mic Preamp 40MPB,
all the basic and advanced features and tells you how to use the microphone preamps.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Manley Labs service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Manley Labs Mono Mic Preamp 40MPB. User manuals are also
available on the Manley Labs website under Pro Audio - Recording - Microphone Preamps.
Question and answer discussion forum concerning user instructions and resolving problems with the Manley Labs Mono Mic Preamp 40MPB - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Manley Labs Mono Mic Preamp 40MPB
|
|
|
|
|