|
User manual for Micromega-Hifi MyAmp - Amplifier / DAC with USB, MICRMYAMPBL
- Manufacturer: Micromega-Hifi
- Basic description and contents of package
- Product classification: Pro Audio - Computer Audio - AD/DA Converters
- Safety instructions
- Startup and operation of the ad/da converters
- Tips for setting up your Micromega-Hifi
- Settings and expert assistance
- Contact Micromega-Hifi service
- Troubleshooting
- Warranty information
- Price: 599 USD
|
We recommend checking out our discussion threads on the Micromega-Hifi MyAmp - Amplifier / DAC with USB, MICRMYAMPBL,
which address similar problems with connecting and setting up AD/DA Converters Micromega-Hifi.
|
User manual for the Micromega-Hifi MyAmp - Amplifier / DAC with USB, MICRMYAMPBL
The user manual for the Micromega-Hifi MyAmp - Amplifier / DAC with USB, MICRMYAMPBL provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - AD/DA Converters.
The black MyAmp from Micromega-HiFi is an all-in-one amplifier with a built-in DAC, USB connection, Bluetooth connectivity, and an integrated headphone amplifier. The MyAmp is built around a class A/B amplifier which uses an advanced resonant mode power supply to deliver 2 x 30W RMS at 8 ohms or 2 x 60W RMS at 4 ohms of clean power with a wide dynamic range.
|
If you own a Micromega-Hifi ad/da converters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Micromega-Hifi MyAmp - Amplifier / DAC with USB, MICRMYAMPBL in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Micromega-Hifi MyAmp - Amplifier / DAC with USB, MICRMYAMPBL:
Analog Inputs | 3 x stereo RCA 250 mV / 1 Mohms Headphone: Stereo 1/8" / 3.5 mm | Digital Inputs | Coaxial SPDIF: > 0.2 V (p-p) / 75 ohms Optical SPDIF: (Toslink) USB: Class 1.0 | Analog Output | Rec Out: Stereo RCA Sub Out: 1 x RCA | Bluetooth Module | aptX Module: Bluetooth 3.0 | Sampling Frequencies | SPDIF: 32 to 192 kHz USB: 44.1 to 96 kHz Max Bluetooth: 48 kHz | Resolution | USB / SPDIF / Bluetooth: 16 to 24-bits | Pairing | Bluetooth Pairing Capacity: 8 | Power Bandwidth | 10 Hz to 100 kHz ±0.5 dB | Power Rating | 2 x 30 W at 8 ohms 2 x 60 W at 4 ohms Recommended Load Impedance: 4 ohms | THD + N | THD+ Noise (10 W / 1 kHz / 8 ohms): ≤ 0.003% | IMD SMPTE | IMD SMPTE Distortion: ≤ 0.01% | Signal to Noise Ratio | > 100 dB (A-weighted) | Damping Factor | >100 up to 1 kHz | Power | Mains Cord Type: C5 Mains Voltage: 85 to 150 VAC or 180 to 265 VAC Mains Frequency: 47 to 63 Hz Standby Power Consumption (85 to 265 VAC): <500 mW | Temperature & Humidity | Working Temperature: 32 to 95°F / 0 to 35°C Storage Temperature: -13 to 140°F / -25 to 60°C Relative Humidity (Working): 20 to 80% Relative Humidity (Storage): 10 to 90% (without condensation) | Dimensions (L x W x H) | 5.5 x 6.5 x 3.0" / 14.0 x 16.5 x 7.5 cm | Weight | 2.2 lb / 1.0 kg | |
The user manual for the Micromega-Hifi MyAmp - Amplifier / DAC with USB, MICRMYAMPBL can be downloaded in .pdf
format if it did not come with your new ad/da converters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Micromega-Hifi users keep a unique electronic library
for Micromega-Hifi ad/da converterss,
where you can use our link to download the user manual for the Micromega-Hifi MyAmp - Amplifier / DAC with USB, MICRMYAMPBL.
The user manual lists all of the functions of the Micromega-Hifi MyAmp - Amplifier / DAC with USB, MICRMYAMPBL,
all the basic and advanced features and tells you how to use the ad/da converters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Micromega-Hifi service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Micromega-Hifi MyAmp - Amplifier / DAC with USB, MICRMYAMPBL. User manuals are also
available on the Micromega-Hifi website under Pro Audio - Computer Audio - AD/DA Converters.
Question and answer discussion forum concerning user instructions and resolving problems with the Micromega-Hifi MyAmp - Amplifier / DAC with USB, MICRMYAMPBL - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Micromega-Hifi MyAmp - Amplifier / DAC with USB, MICRMYAMPBL
|
|
|
|
|