User manual Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD
Operating instructions and pdf manual for use - Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD User manual, User manual Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD, Miranda, CR0808-HD, 8, x, 8, HD/SD, Video, Router, CR0808-HD,
User manual for Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD
Manufacturer: Miranda
Basic description and contents of package
Product classification: Professional Video - Signal Processing & Distribution - Routers & Switchers
Safety instructions
Startup and operation of the routers & switchers
Tips for setting up your Miranda
Settings and expert assistance
Contact Miranda service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD,
which address similar problems with connecting and setting up Routers & Switchers Miranda.
User manual for the Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD
The user manual for the Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Routers & Switchers.
The Miranda CR0808-HD 8 x 8 HD/SD Video Router is used to route both SD and HD video signals using 8 input and 8 output ports. The 1RU compact router comes with a reliable power supply, offering over 500,000 hours MTBF, and SMPTE 292M connectors, which support 1.485Gbps data rates.
Miranda’s Compact Router System Configurator (CRSC) software helps you to configure IP setting, partition routers into multiple levels, build salvos and reconfigure large networks to suit facility workflows. You can even create a configuration offline and upload the settings to a system via the network. An optional control panel can be programmed for device level control using the CRSC software.
If you own a Miranda routers & switchers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD:
Specifications
Electrical
AC input - 90–250 VAC, 50/60 Hz, auto-ranging AC fuses - No user serviceable fuses AC connectors: 2, 12 VDC with external modules AC power: PS0001-00, HB0321-00, 50 W, one IEC 320 AC power usage: 20 W nominal (16 x 16 3Gig, SWB, SD) 35 W nominal (32 x 32 3Gig, SWB, SD) 6 W nominal (16 x 16 AES) 10 W nominal (32 x 32 AES) 9 W nominal (16 x 16 analog video) 16 W nominal (32 x 32 analog video) 18 W nominal (16 x 16 analog audio) 40 W nominal (32 x 32 analog audio) 12 W nominal (16 x 16 port machine) 22 W nominal (32 x 32 port machine) Regulatory compliance: UL listed and CE compliant
Mechanical
Dimensions 1RU for 16 x 16 (1.75", 45 mm) high 2RU for 32 x 32 (3.5", 89 mm) high - 19" (483 mm) wide 1.38" (35 mm) deep, without control panel Exception - analog audio 2.25" (57 mm) deep, without control panel Weight 4.4lb (2kg) - 16 x 16 8.8lb (4kg) - 32 x 32 Mounting - EIA 310-C, 19.0" (483 mm) Grounding terminal - Cooper, accepts 14-6 AWG
Serial Control
Type - 1 Serial port Standard - SMPTE 207M, EIA-422, configurable Connector - 1, DE-9
Ethernet
Type - 10/100 Base T Standard - IEEE 802.3 Protocol - NVISION Ethernet protocol Connector - 1, RJ-45
Environment
Operating temperature - 32 to 104ºF (0 to 40ºC) Relative humidity - 0 to 90%, non-condensing
Type - Unbalanced digital audio Standard - AES3id Sample Rate - Synchronous 48 kHz, Asynchronous 32 to 192 kHz Connector - BNC Impedance - 75 ohm Input level - 200 mV to 3.0 Vp-p Output level - 1 V ±10%
Analog Audio
Type - Analog audio
Connector - DB-25 Impedance - Input 20 kohm, output 50 ohm, nominal Frequency response - 20 Hz to 100 kHz, < ±0.5 dB THD + Noise - <0.005% SNR - >95 dB relative to +24 dBu (20 Hz to 20 kHz) Crosstalk - >85 dB worst case Input CMRR - >75 dB
Video/Reference
Type - Analog video reference Standard - PAL, NTSC, or Tri-Level Sync Connector - Loop-thru, BNC Impedance - 75 ohm or Hi-Z Input level - 0.5 Vp-p to 2.0 Vp-p Input return loss - ≥30 dB to 5 MHz
SD
Type - Standard definition serial digital video Standard - SMPTE 259M Data rate - Auto reclocking at 270 Mbps or auto bypass with pass-through from 19 Mbps to 360 Mbps Connector - BNC Impedance - 75 ohm Cable equalization - 350 m Belden 1694A, 200 m Belden 1855A, or equivalent cable, at 270 Mbps Router path - non-inverting Input/output return loss - >15 dB, 5 to 540 MHz Output level - 800 mVp-p ±10 % Output rise/fall time - 600 ps +10% Output overshoot - ≤10% of amplitude max Output alignment jitter - ≤0.2 UIpp from 1.0 kHz to 27 MHz Output timing jitter - ≤0.2 UIpp from 10 Hz to 1.0 kHz
SD & HD
Type - High definition serial digital video Standard - SMPTE 259M, 344M and 292M Data rate - Auto reclocking at 270 Mbps and 1.483 and 1.485 Gbps or auto bypass with pass-through from 19 Mbps to 1.5 Gbps Connector - BNC Impedance - 75 ohm Cable equalization - 150 m Belden 1694A, 85m Belden 1855A, or equivalent cable, at 1.5 Gbps Router path - non-inverting Output level - 800 mVp-p ±10% Input/output return loss - >15 dB, 5 MHz to 1.5 GHz Output rise/fall time - ≤270 ps Output overshoot - ≤10% of amplitude max Output alignment jitter - ≤0.2 UIpp from 100 kHz to 150 MHz Output timing jitter - ≤1.0 UIpp from 10 Hz to 100 kHz
3Gbps/HD/SD
Type - High definition serial digital video Standard - SMPTE 259M-C, 292M and 424M Data rate - Auto reclocking at 270 Mbps and 1.483, 1.485, 2.967, 2.970 Gbps or auto bypass with pass-through from 19 Mbps to 3.0 Gbps Connector - BNC Impedance - 75 ohm Cable equalization (for cables listed or equivalent cable) - 400 m Belden 1694A, 250 m Belden 1855A at 270 Mbps, 150 m Belden 1694A, 100 m Belden 1855A at 1.5 Gbps, 100 m Belden 1694A, 45 m Belden 1855A at 3.0 Gbps Router path - Non-inverting Output level - 800 mVp-p ±10% Input/output return loss - >15 dB, 5 MHz to 1.5 GHz>10 dB, 1.5 GHz to 3.0 GHz Output rise/fall time - ≤135 ps Output overshoot ≤10% of amplitude max Output alignment jitter - ≤0.3 UIpp from 100 kHz to 300 MHz Output timing jitter - ≤2.0 UIpp from 10 Hz to 100 kHz
Analog Video
Type - Analog video Standard - NTSC, PAL Connector - BNC Impedance - 75 ohm Input return loss - >45 dB, DC to 6 MHz Greater than 30 dB, 6 MHz to 30 MHz Output return loss - >45 dB, DC to 6 MHz Greater than4 0 dB, 6 MHz to 30 MHz Input level - 1 Vp-p, nominal Output level - 1 Vp-p, nominal Output DC offset - 0 V ±30 mV relative to backporch Input range - ±2 V Insertion loss - 0 dB ±0.1 dB, any input to any output Freq. response - 0 dBr ±0.05 dB, DC to 6 MHz Differential gain - <0.1% Differential phase - <0.1° Tilt - <0.1% Delay scatter - < ±65° at sub-carrier (PAL or NTSC) any input to any output Noise spectrum - >60 dB test signal; luminance ramp CMRR - >60 dB at 120 Hz Crosstalk - >65 dB at sub-carrier frequency Output to output isolation - >90 dB at sub-carrier frequency DC coupled system
Port Machine
Type - Bidirectional, dynamically configured Standard - EIA-422, ANSI/SMPTE 207M Connector - RJ-45 Data rates - Up to 1 Mbps
The user manual for the Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD can be downloaded in .pdf
format if it did not come with your new routers & switchers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Miranda users keep a unique electronic library
for Miranda routers & switcherss,
where you can use our link to download the user manual for the Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD.
The user manual lists all of the functions of the Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD,
all the basic and advanced features and tells you how to use the routers & switchers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Miranda service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD. User manuals are also
available on the Miranda website under Professional Video - Signal Processing & Distribution - Routers & Switchers.
Question and answer discussion forum concerning user instructions and resolving problems with the Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the Miranda CR0808-HD 8 x 8 HD/SD Video Router CR0808-HD - no comments have been made yet - be the first to add a comment