User manual Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01
Operating instructions and pdf manual for use - Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01 User manual, User manual Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01, Moog, Werkstatt-01:, Moogfest, 2014, Kit, Analog, WERKSTATT-
User manual for Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01
Manufacturer: Moog
Basic description and contents of package
Product classification: Pro Audio - Musical Instruments - Synthesizer Modules
Safety instructions
Startup and operation of the synthesizer modules
Tips for setting up your Moog
Settings and expert assistance
Contact Moog service
Troubleshooting
Warranty information
Price: 199 USD
We recommend checking out our discussion threads on the Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01,
which address similar problems with connecting and setting up Synthesizer Modules Moog.
User manual for the Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01
The user manual for the Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01 provides
necessary instructions for the proper use of the product Pro Audio - Musical Instruments - Synthesizer Modules.
Allowing you to build a patchable synthesizer based on classic Moog circuitry without the need for any soldering skills, the Werkstatt-01: Moogfest 2014 Kit Analog Synthesizer from Moog, provides the ability to study the analog circuits while creating a single oscillator synthesizer. The finished product gives you a single voltage controlled oscillator (VCO) with frequency control and the option to use either a saw or square waveshape. You can then manipulate your tone via the 4-pole Moog Ladder Filter section, an LFO section, a VCF modulation section, a VCO modulation section, and adjustable Envelope section. The built-in 1 octave low-note priority legato keyboard features glide control for a variety of playing options.
Please note, this kit requires assembly for operation.
If you own a Moog synthesizer modules and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01:
Specifications
Oscillators
Single VCO with frequency control (8 Hz to 16 kHz) Saw and square waveshapes with control for square pulse width Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch with Amount control Ability to PWM the square wave
Filter
4-pole Moog Ladder Filter with Resonance control (20 Hz to 20 kHz) Select between the Envelope generator and LFO as Mod Source Polarity switch (+/-) and amount knob for control of filter cutoff modulation
LFO
Selectable Square or Triangle waveshape with rate control (2 to 600 Hz)
VCA and Amplifier
Select between the Envelope Generator or ON (Drone)
Envelope
Controls for Attack & Decay time with Sustain On/Off switch
Keyboard
One octave low-note priority legato keyboard with glide control
Patchbay
VCA Input: 0 to +5 V in VCA EG Mode, +/-2.5 V in VCA ON Mode VCF Input: -5 to +5 V VCO LINEAR FM Input: +/-2.5 V (This is an inverting control input) VCO EXPONENTIAL FM Input: -5 to +5 V, 1 V/Octave trimmable LFO CV Input: 5 to +5 V (Negative CV slows LFO more than the panel) VCF AUDIO Input: Unbuffered/Unmixed AC coupled input to VCF 2x KB CV Output: 3 V/semitone from 1 keyboard (Attenuate for 1 V/Octave) 2x TRIG Output: 5 ms pulse, 0 to +5 V signal generated from low-note priority 2x GATE Output: 0 to +5 V signal generated from low-note priority 2x EG Output: 0 to +5 V signal, Simple ASD or AD type Envelope Generator 2x LFO Output: -2.5 to +2.5 V Triangle or Square wave, selected via LFO Switch 2x VCF Output: -2 to +2 V signal for audio or CV uses 2x VCO Output: 0 to +5 V VCO signal, wave selected by VCO Wave Switch
Rear Panel
AUDIO Output: Nominal +/-1.5 V Signal Power: +12 VDC Center Positive with 1.2 A Wall transformer Power Consumption 1.8 W, average
The user manual for the Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01 can be downloaded in .pdf
format if it did not come with your new synthesizer modules, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Moog users keep a unique electronic library
for Moog synthesizer moduless,
where you can use our link to download the user manual for the Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01.
The user manual lists all of the functions of the Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01,
all the basic and advanced features and tells you how to use the synthesizer modules.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Moog service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01. User manuals are also
available on the Moog website under Pro Audio - Musical Instruments - Synthesizer Modules.
Question and answer discussion forum concerning user instructions and resolving problems with the Moog Werkstatt-01: Moogfest 2014 Kit Analog WERKSTATT-01 - no comments have been made yet - be the first to add a comment
Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55 Posted by: jpdaval69 2024-09-10 00:50:11
I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607.
I hope you have it and I'm willing to be charged for it.
Best Regards....True Dock not recognizing hard drives - Kingwin True Dock Super-Speed USB 3.0 to TD-2535U3 Posted by: bf1955 2024-08-22 15:34:26
True Dock is not recognizing HDD, the HDD light does not come on, even though the power light does come one....