User manual Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES
Operating instructions and pdf manual for use - Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES User manual, User manual Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES, Netgear, M7100, Series, 24-Port, ProSafe, 10, Gi
User manual for Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES
Startup and operation of the network switches, bridges & hubs
Tips for setting up your Netgear
Settings and expert assistance
Contact Netgear service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES,
which address similar problems with connecting and setting up Network Switches, Bridges & Hubs Netgear.
User manual for the Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES
The user manual for the Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
The M7100 Series 24-Port ProSafe 10 Gigabit Managed Switch from Netgear is a fully managed switch for the 1G/10G server access layer in campus and enterprise networks, and for high-density 10GbE backbone architectures. It delivers line-rate performance for top-of-rack virtualization or convergence, without having to pay the exorbitant acquisition and maintenance costs associated by other networking vendors. Netgear 10 Gigabit Aggregation solutions combine latest advances in hardware and software engineering for higher availability, lower latency and stronger security, at a high-value price point. Like all Netgear products, the M7100 series delivers more functionality with less difficulty: Auto-iSCSI optimization, Private VLANs and Local Proxy ARP take the complexity out of delivering network services for virtualized servers and 10 Gigabit infrastructures.
If you own a Netgear network switches, bridges & hubs and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES:
IEEE 802.1Q VLAN tagging (up to 1,024 VLANs - 802.1Q tagging) Protocol based VLANs (IP subnet, ARP, IPX) Subnet based VLANs MAC based VLANs Voice VLAN Private edge VLAN Private VLAN IEEE 802.1x (guest VLAN, RADIUS based VLAN assignment via .1x, RADIUS based Filter ID assignment via .1x, MAC-based .1x, unauthenticated VLAN)* Double VLAN Tagging (QoQ) (enabling dvlan-tunnel makes interface, global ethertype (TPID), interface ethertype (TPID), customer ID using PVID) GARP with GVRP/GMRP (automatic registration for membership in VLANs or in multicast groups) MVR (multicast VLAN registration)
*IP phones and PCs can authenticate on the same port but under different VLAN assignment policies
L2 Services - Availability
IEEE 802.3ad âÂÂ" LAGs (LACP, static LAGs) (up to 24 x LAGs and up to 8 x physical ports per LAG) LAG hashing Storm control IEEE 802.3x (full duplex and flow control) (per port flow control)* UDLD Support (unidirectional link detection) (normal-mode, aggressive-mode) IEEE 802.1D spanning tree protocol IEEE 802.1w rapid spanning tree IEEE 802.1s multiple spanning tree STP loop guard STP root guard BPDU guard
asymmetric and symmetric flow control
L2 Services - Multicast Filtering
IGMPv2 snooping support IGMPv3 snooping support MLDv1 snooping support MLDv2 snooping support Expedited leave function Static L2 multicast filtering IGMP snooping (enable IGMP snooping per VLAN, snooping querier) Multicast VLAN registration (MVR)
Static routing Port based routing VLAN routing (802.3ad (LAG) for router ports) IP helper (Maximum IP helper entries) IP source guard ECMP Proxy ARP Multinetting ICMP redirect detection in hardware DNSv4 ICMP throttling
Network Monitoring and Discovery Services
ISDP (Industry Standard Discovery Protocol) (inter-operates with devices running CDP) 802.1ab LLDP 802.1ab LLDP âÂÂ" MED SNMP RMON 1,2,3,9 sFlow
Yes (restrict ICMP, PING traffic for ICMP-based DoS attacks)
Management
Management ACL (MACAL) (Maximum Rules: 64) (protects management CPU access through the LAN) Radius accounting (RFC 2565 and RFC 2866) TACACS+
Network Traffic
Access Control Lists (ACLs) (L2 / L3 / L4) (MAC, IPv4, IPv6, TCP, UDP) Protocol-based ACLs ACL over VLANs Dynamic ACLs IEEE 802.1x radius port access authentication (Up to 48 x clients (802.1x) per port are supported, including the authentication of the users domain) 802.1x MAC Address Authentication Bypass (MAB) (supplemental authentication mechanism for non-802.1x devices, based on their MAC address only) Port security IP source guard DHCP snooping Dynamic ARP inspection MAC filtering Port MAC locking Private edge VLAN*
*A protected port does not forward any traffic (unicast, multicast, or broadcast) to any other protected port, same switch
Dest IP: Inbound/Outbound Dest IPv6 IP: Inbound/Outbound Dest L4 Port: Inbound/Outbound Every Packet: Inbound/Outbound IP DSCP: Inbound/Outbound IP Precedence: Inbound/Outbound IP TOS: Inbound/Outbound Protocol: Inbound/Outbound Source IP: Inbound/Outbound Source IPv6 IP: Inbound/Outbound L3 IPv6 Flow Label: Inbound Source L4 Port: Inbound/Outbound Supports Masking: Inbound/Outbound
MAC Rule Match Fields
COS: Inbound/Outbound Dest MAC: Inbound/Outbound Dest MAC Mask: Inbound/Outbound Ethertype: Inbound/Outbound Source MAC: Inbound/Outbound Source MAC Mask: Inbound/Outbound VLAN ID: Inbound/Outbound VLAN ID2 (Secondary VLAN)
Rules Attributes
Assign Queue: Inbound Logging Deny Rules: Inbound/Outbound Mirror: Inbound (to supported interface types only) Redirect: Inbound (to supported interface types only) Interface Inbound direction Outbound direction Supports LAG interfaces Multiple ACLs per interface, dir Mixed-type ACLs per interface, dir Mixed L2/IPv4 ACLs per interface, inbound Mixed IPv4/IPv6 ACLs per interface, inbound Mixed IPv4/IPv6 ACLs per interface, outbound
Interface
Inbound direction Outbound direction Supports LAG interfaces Multiple ACLs per interface, dir Mixed-type ACLs per interface, dir Mixed L2/IPv4 ACLs per interface, inbound Mixed IPv4/IPv6 ACLs per interface, inbound Mixed IPv4/IPv6 ACLs per interface, outbound
COS: Inbound/Outbound COS2 (Secondary COS): Inbound Dest IP: Inbound/Outbound Dest IPv6 IP: Inbound/Outbound Dest L4 Port: Inbound/Outbound Dest MAC: Inbound/Outbound Ethertype: Inbound/Outbound Every Packet: Inbound/Outbound IP DSCP: Inbound/Outbound IP Precedence: Inbound/Outbound IP TOS: Inbound/Outbound Protocol: Inbound/Outbound Reference Class: Inbound/Outbound Source IP: Inbound/Outbound Source IPv6 IP: Inbound/Outbound L3 IPv6 Flow Label: Inbound Source L4 Port: Inbound/Outbound Source MAC: Inbound/Outbound VLAN ID (Source VID): Inbound/Outbound VLAN ID2 (Secondary VLAN) (Source VID): Inbound/Outbound Supports Masking: Inbound/Outbound
Policy Based Routing
Out class unrestricted
Policy Attributes
Assign Queue: Inbound Drop Mark COS Mark IP DSCP Mark IP precedence Mirror: Inbound (to supported interface types only) Police simple Police color aware mode Drop Mark COS Mark IP DSCP Mark IP precedence Police simple Police color aware mode Redirect: Inbound (to supported interface types only)
Service Interface
Inbound Slot.Port configurable Inbound 'All' Ports configurable Outbound Slot.Port configurable Outbound 'All' Ports configurable Supports LAG interfaces Mixed L2/IPv4 match criteria, inbound Mixed IPv4/IPv6 match criteria, inbound Mixed IPv4/IPv6 match criteria, outbound
Number of Pools: 16 (maximum) Leases: 1024 (maximum)
DNS Support
Concurrent Requests: 16 Name Server Entries: 8 Seach List Entries: 6 Static Host Entries: 64 Cache Entries: 128 Domain Search List Entries: 32
Host
IPv4 Build: 6K Static v4 ARP Entries: 128
ACLs
Number of ACLs (Any Type): 100 (maximum) Number Configurable Rules per List: 1023 ingress/512 egress (maximum) ACL Rules per Interface and Direction (IPv4/L2): 1023 ingress/511 egress (maximum) ACL Rules per Interface and Direction (IPv6): 509 ingress/255 egress (maximum) ACL Rules (System-Wide): 16384 (maximum) ACL Logging Rules (System-Wide): 128 (maximum)
802.1p CoS
Configurable Queues per Port: 8 x queues Configurable Drop Precedence Levels: 3
Device
Number of Queues: 8 x queues Requires TLV to Contain all Policy Instances Combined: Yes Rules per Class: 13 (maximum) Instances per Policy: 28 (maximum) Attributes per Instance: 3 (maximum) Service Interfaces: 58 (maximum) Maximum Table Entries: Class Table: 32 Class Rule Table: 192 Policy Table: 64 Policy Instance Table: 640 Policy Attribute Table: 1920 Nested Class Chain Rule Count: 26 (maximum)
The user manual for the Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES can be downloaded in .pdf
format if it did not come with your new network switches, bridges & hubs, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Netgear users keep a unique electronic library
for Netgear network switches, bridges & hubss,
where you can use our link to download the user manual for the Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES.
The user manual lists all of the functions of the Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES,
all the basic and advanced features and tells you how to use the network switches, bridges & hubs.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Netgear service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES. User manuals are also
available on the Netgear website under Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
Question and answer discussion forum concerning user instructions and resolving problems with the Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the Netgear M7100 Series 24-Port ProSafe 10 Gigabit XSM7224-100NES - no comments have been made yet - be the first to add a comment