|
User manual for PAG PL96T Time Battery V-Mount (14.8V, 96Wh) 9304
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
- Manufacturer: PAG
- Basic description and contents of package
- Product classification: Professional Video - Batteries & Power - On Camera Batteries
- Safety instructions
- Startup and operation of the on camera batteries
- Tips for setting up your PAG
- Settings and expert assistance
- Contact PAG service
- Troubleshooting
- Warranty information
- Price: 626 USD
|
We recommend checking out our discussion threads on the PAG PL96T Time Battery V-Mount (14.8V, 96Wh) 9304,
which address similar problems with connecting and setting up On Camera Batteries PAG.
|
User manual for the PAG PL96T Time Battery V-Mount (14.8V, 96Wh) 9304
The user manual for the PAG PL96T Time Battery V-Mount (14.8V, 96Wh) 9304 provides
necessary instructions for the proper use of the product Professional Video - Batteries & Power - On Camera Batteries.
The PAG PL96T is a linking battery that can be used individually or linked with additional units. It's part of the PAGlink system, which allows you to combine the capacities of more than two batteries, in any state of charge, to achieve longer run-times or a higher current-draw capability. Up to eight batteries can be linked for charge or discharge. One unit has a capacity of 96Wh, making it unrestricted, in quantity, for air transportation. Linking two units doubles the capacity to 192Wh. Three units provide 288Wh.
Hard-wearing, heavy-duty contacts are incorporated for high-current applications. The rated maximum continuous output is 12A when linked (8A individually). Linked batteries form a high-speed network that enables them to communicate with each other, managing the output safely, and preventing the transfer of charge between them, and they can be linked while in any state of charge. PAGlink also allows batteries to be hot-swapped for constant, uninterrupted power.
PAGlink batteries feature a higher energy density, long-life, premier-quality Li-ion cells, which have no memory effect, and are completely recyclable. They are designed and constructed to provide the longest possible working life. The battery case is manufactured from high-impact, injection-molded polycarbonate which is inherently very strong and also used for motorcycle helmets. The internal case design also protects the cell-pack against damaging impact.
The PL96T incorporates a numeric run-time and capacity display. Remaining run-time is shown, on-load, expressed in hours and minutes, to a resolution of 1 minute. Remaining capacity is shown as a percentage (1% increments). The display maintains its accuracy by tracking the performance, and adjusting calibration values to compensate for the aging of the cells, and does not require a periodic 'service' charge. The PL96T can be linked to a PL96e battery to provide a numeric display of remaining run-time for all linked batteries.
The PL96T supports four different camera data systems that display capacity in the viewfinder: Sony, IDX, RED, and Anton-Bauer. The battery recognizes the system's data protocol and adapts automatically when connected. The battery can be configured easily for compatibility with the RED Epic/Scarlet camera data system by the user.
The battery stores data in its microprocessor, data such as number of cycles and software version, which can be revealed using the PAGlink Battery Reader (model 9647). This information is designed to assist with the management of a large battery inventory. The PL96T is also firmware-upgradeable. The program can be updated in the field by the user, in a matter of seconds, without opening the battery case. A software update can be supplied by PAG or your dealer. Updates enable you to benefit from the technological advances that PAG introduces to accommodate developments in camera technology.
When using a PAGlink charger, batteries in any state of charge can be charged while linked. The 2-position PL16 charger (model 9707) will simultaneously charge up to 16 PAGlink batteries (8 on each position). Alternatively, PAGlink batteries can be charged individually or linked, using any reputable V-Mount Li-Ion charger, but in this case the batteries must be in a similar state of charge (within 40%) in order to be fully charged when linked. Status during charging is indicated on each battery's individual display. When using the PL16 charger, the numeric display of the PL96T can be inverted, for legibility, with a single button press, and it reverts automatically after removal from the charger.
The battery's advanced electronic protection system is fail-safe and features Parylene coated circuits to protect against electrolyte. Low temperature performance allows PAGlink batteries to operate at -4°F (-20°C). The PL96T has been independently tested in accordance with UN standards and certified to comply with air transport safety regulations. Its capacity is below 100Wh, so it is suitable for air transport on passenger aircraft, in hand-luggage, without quantity restriction (Section 2.3.5.9 of the IATA Lithium-Ion Battery GuidanceDocument (2014)). Before travelling with this product, please check for current compliance with updated, applicable air transport regulations.
|
If you own a PAG on camera batteries and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the PAG PL96T Time Battery V-Mount (14.8V, 96Wh) 9304 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the PAG PL96T Time Battery V-Mount (14.8V, 96Wh) 9304:
| Mount Type | V Mount | | Voltage | 14.8 V nominal; (12 sealed cylindrical cells connected in series/parallel. Each cell has a nominal voltage of 3.7 V) | | Chemistry | Lithium-Ion | | Capacity | Nominal: 6.5 Ah, 96 Wh | | Output Current | Rated Maximum Continuous Output Current: 8 A, 90 W; (For Two or More Linked Batteries: 12 A, 135 W) | | Charge Voltage | 16.8 V | | Charging Temperature | 32 to 113°F (0 to 45°C); Optimum: 50 to 104°F (10 to 40°C) | | Discharging Temperature | -4 to 122°F (-20 to 50°C); Optimum: 50 to 104°F (10 to 40°C) | | Storage Temperature | 14 to 104°F (-10 to 40°C); Optimum: 32 to 68°F (0 to 20°C) | | Dimensions | 5.2 x 3.3 x 1.9" (13.2 x 8.4 x 4.8 cm) | | Weight | 1.6 lb (0.7 kg) | | Package Weight | 1.8 lb | | Box Dimensions (LxWxH) | 6.6 x 3.9 x 2.5" | |
The user manual for the PAG PL96T Time Battery V-Mount (14.8V, 96Wh) 9304 can be downloaded in .pdf
format if it did not come with your new on camera batteries, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other PAG users keep a unique electronic library
for PAG on camera batteriess,
where you can use our link to download the user manual for the PAG PL96T Time Battery V-Mount (14.8V, 96Wh) 9304.
The user manual lists all of the functions of the PAG PL96T Time Battery V-Mount (14.8V, 96Wh) 9304,
all the basic and advanced features and tells you how to use the on camera batteries.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from PAG service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the PAG PL96T Time Battery V-Mount (14.8V, 96Wh) 9304. User manuals are also
available on the PAG website under Professional Video - Batteries & Power - On Camera Batteries.
Question and answer discussion forum concerning user instructions and resolving problems with the PAG PL96T Time Battery V-Mount (14.8V, 96Wh) 9304 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the PAG PL96T Time Battery V-Mount (14.8V, 96Wh) 9304
|
|
|
|
|
