|
User manual for Pelco CM9765L-64x16 Microprocessor-Based Switcher CM9765L-64X16
- Manufacturer: Pelco
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Matrix Solutions - Matrix Switches
- Safety instructions
- Startup and operation of the matrix switches
- Tips for setting up your Pelco
- Settings and expert assistance
- Contact Pelco service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Pelco CM9765L-64x16 Microprocessor-Based Switcher CM9765L-64X16,
which address similar problems with connecting and setting up Matrix Switches Pelco.
|
User manual for the Pelco CM9765L-64x16 Microprocessor-Based Switcher CM9765L-64X16
The user manual for the Pelco CM9765L-64x16 Microprocessor-Based Switcher CM9765L-64X16 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Matrix Solutions - Matrix Switches.
The Pelco CM9765L-64x16 Microprocessor-Based Switcher / Controller is a full-featured video matrix switching control system that allows you to view and control up to 64 cameras and 16 monitors on a single node. Up to 96 individual user-defined ID numbers can be assigned to allow or deny access to system functions.
|
If you own a Pelco matrix switches and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco CM9765L-64x16 Microprocessor-Based Switcher CM9765L-64X16 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Pelco CM9765L-64x16 Microprocessor-Based Switcher CM9765L-64X16:
Input Voltage | 120 VAC, 60 Hz or 230 VAC, 50 Hz, auto-ranging | Power Consumption | 57 W | Diagnostics | Monitor Output: 1 VGA | I/O Ports | 16 RS-422 ports (expandable to 32); total system capability is 120 ports (The CM9700-CC1 is equipped with 16 RS-422 COM ports; total capacity can be expanded to 32 ports by adding two CM9700-SER serial communication cards (8 ports each). Total system capability can be expanded to 120 RS-422 COM ports by adding three CM9700-SER-32 port expansion units (32 ports each) to the CC1.) 2 RS-232 ports 1 parallel printer port 1 VGA output port 2 PC-AT compatible keyboard ports | Operating Temperature | 32 to 120°F (0 to 49°C) | Mounting | Fits 19.00" (48.26 cm) EIA-standard rack (4 RUs) | Dimension (D x W x H) | 19.50 x 19.00 x 7.00" (49.53 x 48.26 x 17.78 cm) | Weight | 29.7 lb (13.5 kg) | Input Voltage | 100 to 240 VAC, 50/60 Hz, autoranging | Power Consumption | 60 W maximum (Fully populated) | Communication | Full duplex RS-422 using an RJ-45 connector | Bandwidth | 15 MHz | Signal-to-Noise Ratio | -70.5 dB | Adjacent Channel Crosstalk | -60.9 dB at 3.58 MHz | Differential Gain | -60.9 dB at 3.58 MHz | Differential Phase | 0.38° | Tilt | Line Tilt: 0.40% Field Tilt: 0.59% | Switching Time | 16 msec | Input | Card slots support up to 16 inputs per bay | Output | 2 output card slots for supporting 32 outputs per bay | Video Input Level | 0.5 to 2 Vpp, RS-170 composite video | Impedance | 75 Ω, terminating, (looping version) | Sync | V-Sync signal (sent up the coaxial cable) provides a synchronization pulse which allows roll-free switching between cameras within the same matrix bay | Drive | Vertical Drive: Input connector available on rear panel | Overall Frequency Response | Flat to 8 MHz | Luma Nonlinearity | 20% | Operating Temperature | 32 to 122°F (0 to 50°C), non-condensing | Mounting | Fits 19" (48.26 cm) EIA-standard rack (matrix bay: 6 RUs; mounting baffle: 1 RU) | Dimension (D x W x H) | Matrix Bay: 21.70 x 19.00 x 10.50" (55.10 x 48.26 x 26.67 cm) Mounting Baffle: 24.00" x 19.00" x 1.75" (60.96 x 48.26 x 4.45 cm) Included with each MXB unit. Total height of MXB with baffle installed is 12.25" (31.00 cm) | Weight | 33.00 lb (14.99 kg) 57.00 lb (25.85 kg), fully populated | |
The user manual for the Pelco CM9765L-64x16 Microprocessor-Based Switcher CM9765L-64X16 can be downloaded in .pdf
format if it did not come with your new matrix switches, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco matrix switchess,
where you can use our link to download the user manual for the Pelco CM9765L-64x16 Microprocessor-Based Switcher CM9765L-64X16.
The user manual lists all of the functions of the Pelco CM9765L-64x16 Microprocessor-Based Switcher CM9765L-64X16,
all the basic and advanced features and tells you how to use the matrix switches.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco CM9765L-64x16 Microprocessor-Based Switcher CM9765L-64X16. User manuals are also
available on the Pelco website under Surveillance - Surveillance Video - Matrix Solutions - Matrix Switches.
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco CM9765L-64x16 Microprocessor-Based Switcher CM9765L-64X16 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Pelco CM9765L-64x16 Microprocessor-Based Switcher CM9765L-64X16
|
|
|
|
|