User manual Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR
Operating instructions and pdf manual for use - Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR User manual, User manual Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR, Pelco, DSSRV, Digital, Sentry, NVR, DSSRV090DVDUSDVR, Video
User manual for Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR
Manufacturer: Pelco
Basic description and contents of package
Product classification: Surveillance - Surveillance Video - Network Video Recorders (NVRs)
Safety instructions
Startup and operation of the network video recorders (nvrs)
Tips for setting up your Pelco
Settings and expert assistance
Contact Pelco service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR,
which address similar problems with connecting and setting up Network Video Recorders (NVRs) Pelco.
User manual for the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR
The user manual for the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Network Video Recorders (NVRs).
The Pelco DSSRV Digital Sentry NVR (Optical Disk Drive / 9 TB) is a H.264 capable, fully scalable hardware/software solution optimized to deliver the essential support required for the DS NVs video management software (VMS) without the extra cost or risk of integrating hardware and software.
Boosted by the second generation Intel Core i7 processor and 8 GB of RAM, Digital Sentry NVR provides an optimal combination of processing power and reliability to meet the demands of HD video recording and playback operations. The system is powered to support up to 128 combined IP and analog video streams, with up to 64 analog cameras supported via the optional ENC5416 direct-attached encoder. Analog streams are also supported using Pelco and third-party encoders.
The DS NVR delivers total available throughput of 280 Mbps for recording of analog and IP video streams as well as playback and export through the DS ControlPoint client. When determining the maximum number of cameras and the desired frame rate to host on each system, the number of concurrent client connections, the number of streams likely to be viewed in playback on each client, and the bandwidth required to support the client connections must be taken into consideration.
The DS NVR functions as a stand-alone system or as part of a network of servers, monitored from the DS ControlPoint user interface. The system can be deployed solely as a network video recorder, as a digital video recorder (DVR), or as a hybrid NVR.
Two gigabit network ports provide for convenient network architecture planning by allowing one port to be dedicated to IP cameras, while the second network port is used for client connections. Two DVI-D ports provide a convenient connection for high resolution digital monitors for use with HD cameras.
With front-available drives for easy servicing and upgrades, the Digital Sentry Network Video Recorder comes with 9 TB of storage with an optical disk drive (ODD). The drives are hot-swappable when configured for internal RAID 5 storage with the optional RAID 5 controller card. A minimum of 3 drives is required for a RAID 5 configuration. External storage is supported through USB attached storage or by using the optional DSSRV-SCSI interface card connected to DX8100HDDI storage of up to 24 TB. The external storage can be configured for JBOD storage of software controlled RAID 5. Internal RAID 5 storage cannot be used in conjunction with external storage.
Front panel LED displays on the DS NVR provide heads-up information on system operation. The LEDs are integrated with the Digital Sentry System Information (DSSI) utility, providing critical, real-time statistics on system resource utilization, temperature, and throughput status.
The cornerstone of Digital Sentry design, a fully Open Architecture, is provided through ONVIF compliance and support for a large number of IP-specific drivers. Users can choose specific IP cameras or encoders to fit their application.
Eliminate the risk of deferred support that comes with VMS software from one vendor and a general purpose hardware platform from another. Replace it with the assurance of an integrated platform built specifically for the rigors of IP video recording. Make the performance, reliability, and Open Architecture of DS NVs running on DS NVR the core foundation of your video management solution.
If you own a Pelco network video recorders (nvrs) and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR:
Unit status: Green, amber, red Primary network: Green, amber, red Secondary network: Green, amber, red Software status: Green, amber, red (based on diagnostics) Hard disk status: Green, red, off (behind bezel)
Processor - Second Generation Intel Core i7 processor with integrated graphics Memory - 4 GB or higher Operating system - Windows XP Professional SP2, Windows Vista (32 or 64 bit), Windows 7 (32 or 64 bit)
Certifications
CE, class A; meets EN50130-4 standard requirements FCC, class A UL/cUL C-Tick CCC KCC S Mark
0.25 G at 3 Hz to 200 Hz at a rate of 0.5 octave/minute
Dimensions (DxWxH)
20 x 17.1 x 3.5" (50.8 x 43.4 x 8.9 cm)
Weight
34 lb (15.4 kg)
The user manual for the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR can be downloaded in .pdf
format if it did not come with your new network video recorders (nvrs), although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco network video recorders (nvrs)s,
where you can use our link to download the user manual for the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR.
The user manual lists all of the functions of the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR,
all the basic and advanced features and tells you how to use the network video recorders (nvrs).
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR. User manuals are also
available on the Pelco website under Surveillance - Surveillance Video - Network Video Recorders (NVRs).
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco DSSRV Digital Sentry NVR DSSRV090DVDUSDVR - no comments have been made yet - be the first to add a comment