User manual for Pelco TW3001AT Single-Channel UTP Video Transmitter TW3001AT
- Manufacturer: Pelco
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Video Transmission - Signal Extenders
- Safety instructions
- Startup and operation of the signal extenders
- Tips for setting up your Pelco
- Settings and expert assistance
- Contact Pelco service
- Troubleshooting
- Warranty information
- Price: 204 USD
|
We recommend checking out our discussion threads on the Pelco TW3001AT Single-Channel UTP Video Transmitter TW3001AT,
which address similar problems with connecting and setting up Signal Extenders Pelco.
|
User manual for the Pelco TW3001AT Single-Channel UTP Video Transmitter TW3001AT
The user manual for the Pelco TW3001AT Single-Channel UTP Video Transmitter TW3001AT provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Signal Extenders.
The Pelco TW3001AT converts the video signal coming from a single BNC analog device so that it can be transmitted over a UTP (Unshielded Twisted Pair) cable. Along with color and B/W video, this unit will also transmit Pelco's Coaxitron (up the coax) PTZ control signal over the same UTP wire, eliminating the need to run a separate control cable. Some of the key advantages UTP has over a BNC cable is a lower cost, less bulkiness and most importantly, the ability to transmit over longer distances without suffering signal attenuation. A UTP transmitter is also an obvious choice for use in buildings already wired for UTP.
This unit is compatible with all Pelco UTP equipped cameras, enclosures and domes. Pelco recommends the use of Cat5e or Cat6 UTP cables. Two attached side brackets allow the unit to be easily mounted to a wall.
|
If you own a Pelco signal extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco TW3001AT Single-Channel UTP Video Transmitter TW3001AT in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Pelco TW3001AT Single-Channel UTP Video Transmitter TW3001AT:
Signal System | NTSC/PAL/SECAM | Channels | 1 | UTP Input/Output Connector | Screw terminal | Video Input | BNC x1 | Video Output | UTP x1 | Cable Type | Cat3/5/5e/6 | Maximum Cable Length | Cat 3 UTP Cable With Passive Receiver: 1500 ft (457m) With Active Reciever: 2500 ft (762m)
Cat5 UTP Cable With Passive Receiver: 3000 ft (914m) With Active Receiver: 5000 ft (1524m)
Cat5e UTP Cable With Passive Receiver: 3000 ft (914m) With Active Receiver: 5000 ft (1524m)
Cat6 UTP Cable With Passive Receiver: 3000 ft (914m) With Active Receiver: 5000 ft (1524m) | Power Requirements | 24 VAC (includes 110 VAC transformer) | Power Consumption | 4.5W | Operating Temperature | 32 - 167°F (0 - 75°C) | Dimensions (WxHxD) | 3 x 1.1 x 2.3" (7.6 x 2.8 x 5.7cm) | Weight | 4.8 oz (136 g) | |
The user manual for the Pelco TW3001AT Single-Channel UTP Video Transmitter TW3001AT can be downloaded in .pdf
format if it did not come with your new signal extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco signal extenderss,
where you can use our link to download the user manual for the Pelco TW3001AT Single-Channel UTP Video Transmitter TW3001AT.
The user manual lists all of the functions of the Pelco TW3001AT Single-Channel UTP Video Transmitter TW3001AT,
all the basic and advanced features and tells you how to use the signal extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco TW3001AT Single-Channel UTP Video Transmitter TW3001AT. User manuals are also
available on the Pelco website under Surveillance - Surveillance Video - Video Transmission - Signal Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco TW3001AT Single-Channel UTP Video Transmitter TW3001AT - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Pelco TW3001AT Single-Channel UTP Video Transmitter TW3001AT
|
|