User manual for Profoto B1 500 AirTTL Battery-Powered Flash 901094
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
- Manufacturer: Profoto
- Basic description and contents of package
- Product classification: Lighting & Studio - Strobe Lighting - Monolights
- Safety instructions
- Startup and operation of the monolights
- Tips for setting up your Profoto
- Settings and expert assistance
- Contact Profoto service
- Warranty information
We recommend checking out our discussion threads on the Profoto B1 500 AirTTL Battery-Powered Flash 901094,
which address similar problems with connecting and setting up Monolights Profoto.
User manual for the Profoto B1 500 AirTTL Battery-Powered Flash 901094
The user manual for the Profoto B1 500 AirTTL Battery-Powered Flash 901094 provides
necessary instructions for the proper use of the product Lighting & Studio - Strobe Lighting - Monolights.
Whenever Profoto introduces a product, anyone in the photo world sits up and takes notice since at the very least, it's going to be impressive. The introduction of the B1 500 AirTTL is truly ground-breaking or to be more accurate, game-changing.
If you own a Profoto monolights and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Profoto B1 500 AirTTL Battery-Powered Flash 901094 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Profoto B1 500 AirTTL Battery-Powered Flash 901094:
| Maximum Watt/Seconds || 500W/s +/- 1/20 Stop |
| Guide Number || 291 @6.56' (2.0 m), 100 ISO with Magnum reflector |
| Display || LCD Indicators for: |
Power in 1/10 stop increments
Battery charge level
Modeling light status
Recycle alert: Beep, Dim, Beep and Dim, silent
Sync: Slave, radio channel and group
Back panel control:
Modeling light button
Test, On/Off button
| Flash Variability || In 1/10 or 1 Stop increments 9.0 Stops: |
2.0-10 power level (1/256-1/1)
| Recycle Time || Minimum/Maximum: 0.1-1.9 sec. |
Quick Burst Mode: 20 frames per sec.
| Flash Duration || Normal mode (t0.5): 1/11,000 - 1/1,000 sec. min/max power |
Freeze mode (0.05): 1/19,000 - 1/1,000 sec. min/max power
| Color Temperature || 5,600K |
+/- 150K over entire power range, +/- 20K flash to flash
+/- 800K over entire power range, +/- 50K flash to flash
| Beam Angle || 77 Degrees with built-in reflector and opal protective glass |
| Modeling Light || 20W LED (70W tungsten equivalent) |
Replaceable by service tech.
| Modeling Light Control || Off / Proportional / Free (full) 5.0-100% |
| Wireless Remote || Yes, via optional Air Remote TTL-C/N, Air remote, Air USB (Profoto Studio) Wireless range: |
Up to 1,000' (300 m) for normal triggering
Up to 330' (100 m) for TTL with optional Air Remote TTL-C
| Frequency Band || 2.4 GHz |
| Triggering || Air radio slaves, optical (IR), sync cord |
| Max Sync Speed || Up to 1/250 sec. in normal mode |
Up to 1/8,000 sec. in High Speed mode (requires free firmware update)
| Operating Voltage || 100-240 VAC, 50/60 Hz, Self-sensing |
14.8 VDC/3 Ah via included, rechargeable battery
| Auto Power Off || Yes, after 60 minutes of disuse |
Sleep mode after 30 minutes of disuse
| Battery Type || Lithium-ion |
220 Full power flashes Battery life: 300 charge cycles (to 80% left)
| Flash Ready Indicator || Beep tone, ready right, modeling light dimming |
| Battery Charge Time || 2.0 Hours with included 2.8V multi-voltage charger |
1.0 Hour with optional 4.5V quick charger
| Battery Charge Display || Green LED indicators: 3 Sections: 100-70% |
2 Sections: 70-40%
1 Section: 40-10%
1 Section blinking
| User Replaceable Flashtube || No, via authorized service tech. |
| Voltage Stabilization || Yes |
| Circuit Protection || Adaptive thermal control |
| Fan Cooled || Yes |
| Auto Dump || Yes |
| Operating Temperature || 14 to +122°F (-10 to +50°C) |
Storage: 4 to +140°F (-20 to +60°C)
| Dimensions || Length x diameter: |
Body only: 12.2 x 5.12 (310 x 130 mm)
With 5/8" (16 mm) stand adapter: 12.2 x 6.69" (310 x 170 mm)
| Weight || 6.61 lb (3.0 kg) Including battery |
| Package Weight || 11.5 lb |
| Box Dimensions (LxWxH) || 18.2 x 7.0 x 6.8" |
The user manual for the Profoto B1 500 AirTTL Battery-Powered Flash 901094 can be downloaded in .pdf
format if it did not come with your new monolights, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Profoto users keep a unique electronic library
for Profoto monolightss,
where you can use our link to download the user manual for the Profoto B1 500 AirTTL Battery-Powered Flash 901094.
The user manual lists all of the functions of the Profoto B1 500 AirTTL Battery-Powered Flash 901094,
all the basic and advanced features and tells you how to use the monolights.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Profoto service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Profoto B1 500 AirTTL Battery-Powered Flash 901094. User manuals are also
available on the Profoto website under Lighting & Studio - Strobe Lighting - Monolights.
Question and answer discussion forum concerning user instructions and resolving problems with the Profoto B1 500 AirTTL Battery-Powered Flash 901094 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Profoto B1 500 AirTTL Battery-Powered Flash 901094