|
User manual for QSC CMX2000Va 2500W Professional Power Amplifier CMX2000VA
- Manufacturer: QSC
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Power Amplifiers
- Safety instructions
- Startup and operation of the power amplifiers
- Tips for setting up your QSC
- Settings and expert assistance
- Contact QSC service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the QSC CMX2000Va 2500W Professional Power Amplifier CMX2000VA,
which address similar problems with connecting and setting up Power Amplifiers QSC.
|
User manual for the QSC CMX2000Va 2500W Professional Power Amplifier CMX2000VA
The user manual for the QSC CMX2000Va 2500W Professional Power Amplifier CMX2000VA provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The QSC CMX2000Va 2500W Professional Power Amplifier is a 3RU power amplifier designed for live sound reinforcement applications such as for performance halls, houses of worship, sports clubs, gymnasiums, dance venues, pubs, and more.
The amplifier uses a powerful, high-current toroidal transformer with filtering to ensure sufficient energy reserves. This allows the amplifier to handle high-level transients, even when driving 2Ω speaker loads.
The amplifier output sections feature 3-tier class H architecture. The class H output section reduces AC current draw and cuts down on unnecessary heat. Automatic current limiting protects the amplifier from damage until the short is corrected. It also features DC protection systems to prevent loudspeaker damage in the unlikely event of an output transistor failure. DC voltage from the power supply is never passed directly to your speakers, even in case of an output circuit breakdown.
A full complementary output circuit using high-grade linear output devices generates a flat-frequency response with low distortion. SMT (Surface Mount Technology) triples small-signal component density, enabling high power output in a 3RU chassis, less than 16" deep. The output devices are directly mounted to the heat sink to improve thermal coupling and cooling.
The unit has the ability to directly drive 70 and/or 100V distributed loudspeakers. The amplifier may be used in either stereo or mono mode. For installations requiring a transformer isolated output, the CMX has optional accessories to accommodate different applications.
|
If you own a QSC power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the QSC CMX2000Va 2500W Professional Power Amplifier CMX2000VA in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the QSC CMX2000Va 2500W Professional Power Amplifier CMX2000VA:
Connectors | Input (active balanced): 2 x barrier strip 2 x 3-Pin XLR 2 x 1/4" (6.3 mm) to TRS tip and XLR pin 2 positive
Output:2 x detachable terminal block 2 x Neutrik Speakon | Stereo FTC Power | 8Ω / FTC 20 to 20,000 Hz / 0.1% THD: 1050 W 8Ω / EIA 1,000 Hz / 0.1% THD: 1100 W 4Ω / FTC 20 to 20,000 Hz / 0.1% THD: 1600 W 4Ω / EIA 1,000 Hz / 0.5% THD: 2000 W (1% THD) 2Ω / EIA 1,000 Hz / 1% THD: 2500 W 70 V Direct Drive / EIA 1,000 Hz / 1% THD: 2500 W 100 V Direct Drive / EIA 1,000 Hz / 1% THD: 1000 W | Bridge | 8Ω / FTC 20 to 20,000 Hz / 0.1% THD: 3200 W 8Ω / EIA 1,000 Hz / 0.1% THD: 3600 W 4Ω / EIA 1,000 Hz / 1% THD: 5000 W 70 V Direct Drive / EIA 1,000 Hz / 1% THD: 5000 W 100 V Direct Drive / EIA 1,000 Hz / 1% THD: 3600 W | Signal to Noise Ratio | 20 to 20,000 Hz, 8Ω: > -100 dB | Input Sensitivity @ 8 ohms | 1.42 V (+5.3 dBu) | Voltage Gain | At 8 Ω: 64 x (36 dB) | Output Circuit | 3-tier Class H | Power Requirements | Typical, 1/8 Power Pink Noise at 4 Ω, 120 VAC: 13.9 A Typical, 1/8 Power Pink Noise at 4 Ω, 230 VAC: 7 A Severe, 1/3 Power Pink Noise at 4 Ω, 120 VAC: 26.9 A Severe, 1/3 Power Pink Noise at 4 Ω, 230 VAC: 13.5 A | Distortion | SMPTE-M: < 0.01% 20 to 20,000 Hz at 10 dB below rated power (typical): < 0.03% THD / 4 Ω and 8 Ω 1,000 Hz and below full-rated power (typical): <0.03% THD at 4 Ω and 8 Ω | Frequency Response | 20 to 20,000 Hz: ±1 dB -3 dB points: 5 to 50,000 Hz | Damping Factor | > 300 at 8 Ω (1,000 Hz and below) | Input Impedance | 10 kΩ unbalanced, 20 kΩ balanced | Input Clipping Level | 10 Vrms (+22 dB) | Cooling | Continuously variable-speed fan, rear-to-front air flow | Controls | Front: AC switch, channel 1 and 2 gain knobs Rear: 10-position DIP switch | Indicators | Power-On: Green LED Signal: Green LED (1 per channel) Clip: Red LED (1 per channel) | Protection | Amplifier: Stable into reactive or mismatched loads Load: On/off muting, AC coupling, triac crowbar | Power Requirement | 120 and 230 VAC, 50 to 60 Hz | Dimensions (H x W x D) | 5.2 x 19.0 x 15.9" (13.2 x 48.3 x 40.0 cm) | Weight | 75.0 lb (33.1 kg) | Package Weight | 80.6 lb | Box Dimensions (LxWxH) | 24.0 x 22.0 x 8.0" | |
The user manual for the QSC CMX2000Va 2500W Professional Power Amplifier CMX2000VA can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other QSC users keep a unique electronic library
for QSC power amplifierss,
where you can use our link to download the user manual for the QSC CMX2000Va 2500W Professional Power Amplifier CMX2000VA.
The user manual lists all of the functions of the QSC CMX2000Va 2500W Professional Power Amplifier CMX2000VA,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from QSC service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the QSC CMX2000Va 2500W Professional Power Amplifier CMX2000VA. User manuals are also
available on the QSC website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the QSC CMX2000Va 2500W Professional Power Amplifier CMX2000VA - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the QSC CMX2000Va 2500W Professional Power Amplifier CMX2000VA
|
|
|
|
|