|
User manual for QSC RMX5050A 3600W Professional Power Amplifier (3RU) RMX5050A
- Manufacturer: QSC
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Power Amplifiers
- Safety instructions
- Startup and operation of the power amplifiers
- Tips for setting up your QSC
- Settings and expert assistance
- Contact QSC service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the QSC RMX5050A 3600W Professional Power Amplifier (3RU) RMX5050A,
which address similar problems with connecting and setting up Power Amplifiers QSC.
|
User manual for the QSC RMX5050A 3600W Professional Power Amplifier (3RU) RMX5050A
The user manual for the QSC RMX5050A 3600W Professional Power Amplifier (3RU) RMX5050A provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The QSC RMX5050A 5000W Professional Power Amplifier is a 3RU unit designed for high powered live sound reinforcement applications. The amplifier can operate in stereo, dual mono, or mono bridged modes and can handle output impedances between 2 and 8 ohms. The unit is rated at 1100W per channel at 8 ohms between 20 and 20,000 Hz, 1800W per channel at 4 ohms between 20 and 20,000 Hz, 2500W per channel at 2 ohms between 20 and 20,000 Hz, and 3600W at 8 ohms in bridged mono mode between 20 and 20,000 Hz. The amplifier utilizes high-current toroidal transformers for greater power and lower noise when driving 2 ohms loads.
For I/O, the unit accepts balanced 1/4" TRS, XLR, and barrier strip inputs as well as touch proof binding post and Neutrik Speakon outputs. The front panel features independent gain controls for both channels with LED indicator lights to monitor the presence of the signal and when the signal is clipping.
Each channel is built with DC and thermal overload protection. Independent user-defeatable clip limiters reduce distortion. A selectable 30 or 50 Hz low-frequency filter can be engaged to protect your speakers from bottoming out and increase overall headroom.
|
If you own a QSC power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the QSC RMX5050A 3600W Professional Power Amplifier (3RU) RMX5050A in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the QSC RMX5050A 3600W Professional Power Amplifier (3RU) RMX5050A:
Stereo FTC Power | 8 ohms / FTC 20 to 20,000 Hz / 0.1% THD: 1050 W 8 ohms / EIA 1,000 Hz / 0.1% THD: 1100 W 4 ohms / FTC 20 to 20,000 Hz / 0.1% THD: 1600 W 4 ohms / EIA 1,000 Hz / 0.1% THD: 1800 W 2 ohms / EIA 1,000 Hz / 1% THD: 2500 W | Bridge | 8 ohms / FTC 20 to 20,000 Hz / 0.1% THD: 3200 W 8 ohms / EIA 1,000 Hz / 0.1% THD: 3600 W 4 ohms / EIA 1,000 Hz / 1% THD: 5000 W | Input Connectors | Active balanced 1/4" TRS Balanced XLR Euro-style detachable terminal block | Output Connectors | Touch-proof binding posts NL4 Neutrik Speakon connectors | Headroom | 2 dB at 4 ohms | Distortion | SMPTE-IM: < 0.02% | Frequency Response | 20 to 20,000 Hz: 0/-1 dB -3 dB Points: 5 to 50,000 Hz (LF filter bypassed / 8 ohms) | Damping Factor | >250 at 8 ohms | Noise | 100 dB below rated output from 20 to 20,000 Hz at 8 ohms | Voltage Gain | 64x (36 dB) for 8 ohms | Signal to Noise Ratio | > - 100 dB (20 to 20,000 Hz at 8 ohms) | Input Sensitivity @ 8 ohms | 1.42 V (5.3 dBu) | Input Impedance | 10 kOhms unbalanced / 20 kOhms balanced | Controls | Front: AC switch Ch.1 and Ch.2 gain Rear: 10-position DIP switch | Input Clipping Level | 6.4 VRMS (+18 dBu) | Indicators | Power: Blue LED Clip: Red LED, 1 per channel Signal: Green LED, 1 per channel | Cooling | Continuously variable speed fan, back-to-front air flow | Protection | Full short circuit, open circuit, thermal, ultrasonic, and RF protection Stable into reactive or mismatched loads Load: Turn-on and turn-off muting/DC fault | Output Circuit | 3-tier Class H | Power Requirements | Typical, 1/8 Power Pink Noise at 4 ohms: 13.9 A Severe, 1/3 Power Pink Noise at 4 ohms: 26.9 A | Current Consumption | At 120 V
8 ohms Typical: 8.7 A, Full: 17.0 A, Maximum: 34.4 A
4 ohms Typical: 13.9 A, Full: 26.9 A, Maximum: 56.4 A
2 ohms Typical: 18.9 A, Full: 38.0 A, Maximum: 84.7 A | Plug Type | Supplied: NEMA 5-20 (100 / 120 V) CEE7/7 (230 V) | Power Requirement | 100, 120, 230 VAC, 50 to 60 Hz (factory configured) | Dimensions (H x W x D) | 5.2 x 19.0 x 15.9" (132.0 x 483.0 x 404.0 mm) | Weight | 75.0 lb (33.1 kg) | Package Weight | 83.15 lb | Box Dimensions (LxWxH) | 24.0 x 22.0 x 8.05" | |
The user manual for the QSC RMX5050A 3600W Professional Power Amplifier (3RU) RMX5050A can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other QSC users keep a unique electronic library
for QSC power amplifierss,
where you can use our link to download the user manual for the QSC RMX5050A 3600W Professional Power Amplifier (3RU) RMX5050A.
The user manual lists all of the functions of the QSC RMX5050A 3600W Professional Power Amplifier (3RU) RMX5050A,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from QSC service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the QSC RMX5050A 3600W Professional Power Amplifier (3RU) RMX5050A. User manuals are also
available on the QSC website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the QSC RMX5050A 3600W Professional Power Amplifier (3RU) RMX5050A - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the QSC RMX5050A 3600W Professional Power Amplifier (3RU) RMX5050A
|
|
|
|
|